Search found 985 matches

by miuan
Apr 08 2019 3:11am
Forum: Items for Sale - New
Topic: 3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€
Replies: 8
Views: 921

Re: 3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€

no more hydraulic for mxus 3k huh in a 135mm spaced dropout? I only have a 160 but 203 wouldn't help here. No hydro brake that I know of will fit in such tight space. Just get a 150 or 170mm dropout frame and be done with that. That is when you require high performance brake or consistent feel on a...
by miuan
Apr 02 2019 3:16am
Forum: Items for Sale - New
Topic: 3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€
Replies: 8
Views: 921

Re: 3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€

wow maybe the solution to the major headache from trying to put rear disc brakes on the mxus 3k!! Well done. just got it too bad im stuck with the origional 3k till i sell it. I should add that my brake caliper is a Promax mechanical. You absolutely want the lowest profile caliper available, and dr...
by miuan
Apr 01 2019 3:30am
Forum: Items for Sale - New
Topic: 3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€
Replies: 8
Views: 921

3000W fast 3t winding motor (MXUS 3k Turbo clone) EUROPE 240€

Up for sale a 3000W rated V3 motor at mere 240 EUR. Bought one too many for my projects. Motor is a private brand from Poland, similar to MXUS 3k: https://tinyurl.com/yywk9are Fast 3 turn winding, expect top speed abt. 55-60kph @ 48V and 75-80kph @ 72V in 26" wheel: https://www.ebikes.ca/tools/simul...
by miuan
Feb 23 2019 4:02pm
Forum: E-Bike General Discussion
Topic: Want advice on electrifying Kona Electric Ute
Replies: 19
Views: 804

Re: Want advice on electrifying Kona Electric Ute

I electrified two standard Utes in the past. First had a pair of 500W direct drive hub motors and a 57V battery. The thing would climb anything. Second had rear Magic Pie and front geared 500W Mac. It could do 65kph up a slight hill at 72 Volts. Had both of them stolen. Both had quality suspension f...
by miuan
Dec 28 2018 10:04am
Forum: Items Wanted
Topic: FOUND!!! EU: Rear DD hub motor for 135mm dropout
Replies: 3
Views: 426

Re: EU: Rear DD hub motor for 135mm dropout

Thanks Bill, this is a pretty good deal, unfortunately the distance (and resulting shipping and customs charges) are a deal breaker in this case. I really want to buy from Europe.
by miuan
Dec 20 2018 8:41am
Forum: Items Wanted
Topic: FOUND!!! EU: Rear DD hub motor for 135mm dropout
Replies: 3
Views: 426

FOUND!!! EU: Rear DD hub motor for 135mm dropout

30-35mm stator
14mm axle
7spd freewheel compatible
60-65kph loaded in 26in rim at 72V = about 9 to 10 kV
please offer price incl. shipping to Bratislava
by miuan
Feb 21 2018 9:38am
Forum: Items for Sale - Used
Topic: MXUS 5k turbo!!
Replies: 7
Views: 2007

Re: MXUS 5k turbo!!

Still available? 600 for motor or whole package?
by miuan
Jan 17 2018 8:46am
Forum: Battery Technology
Topic: Are my charged cells within ok range of balanced?
Replies: 20
Views: 1670

Re: Are my charged cells within ok range of balanced?

A friend passed me his highly unbalanced LiFePO4 BMS equipped 12Ah battery. I got no more than 2Ah out of it - it was so unbalanced. Ultimately I got as much as 11Ah out of it. The way I did it was very easy. Connected a hair dryer to the discharge lead, so the charging process wound never end, and ...
by miuan
Dec 06 2017 5:06am
Forum: E-Bike General Discussion
Topic: Run motor with insufficient amp batteries damaging?
Replies: 12
Views: 993

Re: Run motor with insufficient amp batteries damaging?

Keep the BMS. The cells are fine with up to 200A burst. Make sure the rest of battery build is sturdy enough to sustain the peak current your starter will draw. Then build a simple external switching circuit, triggered by BMS output.
by miuan
Nov 22 2017 4:21am
Forum: E-Bike Technical
Topic: Shengyi Motors
Replies: 10
Views: 993

Re: Shengyi Motors

A 1 turn climbs with exactly the efficiency of a 10 turn, and it draws no added power from the pack to do it, but it does place more burden on the controller to buck the pack voltage to the voltage the motor uses during the climb. Agree that the difference in overall efficiency will be miniscule, o...
by miuan
Nov 21 2017 2:23pm
Forum: E-Bike Technical
Topic: Shengyi Motors
Replies: 10
Views: 993

Re: Shengyi Motors

Provided the controller can't put out more than 30/35A phase current, the slower motor may have about 10% higher torque at startup (under 7-8mph) and will be a hair more efficient. Not much of a difference though...
by miuan
Nov 15 2017 8:43am
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 139
Views: 20533

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Hi Madin, I really can't help with belt drives, but before you get into all the trouble of building one, have you tried a MAC on the Votec? I really love the MXUS 3k on my steel fatbike (pic attached). Road bump filtering with the 4 inch tyre is second to none. Even for light trails, the fatbike rid...
by miuan
Oct 01 2017 3:42am
Forum: General Discussion
Topic: Canine assist
Replies: 4
Views: 655

Re: Canine assist

Done that once. More adrenaline than a timed downhill run, everything was out of my control :)
by miuan
Sep 14 2017 8:28am
Forum: Items Wanted
Topic: 72V 6-fet sine wave controller w/regen EUROPE
Replies: 0
Views: 255

72V 6-fet sine wave controller w/regen EUROPE

I am looking for a suitable small controller to power a 9C 2809 slow wind motor.
Will be run at 20S.
by miuan
Sep 13 2017 2:54am
Forum: E-Bike Technical
Topic: Edge 1,500 and 3.25mm spoke holes and 13ga 2.25mm spokes
Replies: 11
Views: 677

Re: Edge 1,500 and 3.25mm spoke holes and 13ga 2.25mm spokes

I second Chalo. It's worked wonders for me, on motorized and pedal hubs alike.
The key is to move the straight section of spoke as close to the flange as possible, so the J-bend won't get stressed under load.
by miuan
Aug 21 2017 4:32pm
Forum: Battery Technology
Topic: Turnigy Multistar - lightweight 10C cells
Replies: 514
Views: 68824

Re: Turnigy Multistar - lightweight 10C cells

I ran 10Ah multistars with 80A peak controller and they did get very warm after a couple aggressive rides. 5C peaks are fine. Just make sure you weed out every suspicious pack. It sure IS a costly decision with such big packs. Also DO reconsider building the battery out of high grade 18650s. They ar...
by miuan
Jul 26 2017 5:53am
Forum: E-Bike General Discussion
Topic: 20/24" fork dropouts vs 16T high torque Mac motor?
Replies: 6
Views: 919

Re: 20/24" fork dropouts vs 16T high torque Mac motor?

A modern disc brake with radial master cylinder like e.g. Formula RX, RO or T1 has enough power AND modulation for your purpose. I advise against Shimano Servo Wave or Hope brakes as the few I've ridden had terrible modulation, albeit good braking power. Get a small brake rotor, you will not need mo...
by miuan
Jul 26 2017 2:41am
Forum: E-Bike General Discussion
Topic: I never had a tire do this before.....
Replies: 19
Views: 1302

Re: I never had a tire do this before.....

What brand of tyre do you use? Some manufacturers make too loose fitting (too high diameter) beads and combined with a too small diameter rim, the bead is sometimes not seated properly and allows one side to sit too low while the opposite side is allowed too close to outer rim edge, risking a blow l...
by miuan
Jul 13 2017 8:41am
Forum: E-Bike General Discussion
Topic: snapping spokes
Replies: 23
Views: 2548

Re: snapping spokes

Over years, I have encountered 3 principal causes of broken spokes. 1. Radical spoke angle Remedies: Custom drilled spoke holes to get angle over 80 degrees (a 2-hour DIY job) Assymetrically drilled rims (moto rims or Ryde Andra bicycle rims) - loose spoke elbow at hub flange Remedy: insert brass wa...
by miuan
Jun 28 2017 2:19am
Forum: Battery Technology
Topic: Simple charge voltage limiter board
Replies: 19
Views: 2473

Re: Simple charge voltage limiter board

It seems to only be advertised for 220V. I'd love to try that for you, but there is no 110V outlet nearby... We are talking the XH-M602 boards however. There is a XH-M604 too, and it's fed directly by DC from charger. Instead of charger power, it switches battery connection. It's limited to 80V thou...
by miuan
Jun 28 2017 2:13am
Forum: Battery Technology
Topic: Turnigy Multistar - lightweight 10C cells
Replies: 514
Views: 68824

Re: Turnigy Multistar - lightweight 10C cells

Is it ok to connect 6s 8000mah graphene pack (internal resistance 5mΩ) to 6s 16000mah multistar (internal resistance 9mΩ)? I would use these pack three in series so it would total 18s 24000mah. As long as the discharge curves match each other and the parallel wiring doesn't have to handle excessive...
by miuan
Jun 14 2017 8:49am
Forum: E-Bike Non-hub Motor Drives
Topic: Possible to make a trapezodial motor run on sinusodial cont?
Replies: 26
Views: 2477

Re: Possible to make a trapezodial motor run on sinusodial c

Should i connect the battery, usb to pc and controller when performing the test? No i have no other controller :( But will the sabvoton be able to run trapezodial motor? You have to disconnect everything before performing the motor phase test. But when disconnecting the controller, do it one phase ...
by miuan
Jun 14 2017 8:02am
Forum: E-Bike Non-hub Motor Drives
Topic: Possible to make a trapezodial motor run on sinusodial cont?
Replies: 26
Views: 2477

Re: Possible to make a trapezodial motor run on sinusodial c

Yes. All 3 output between 0. and 5v. So that shouldent be an issue. I dont know about phase wires. How can that be checked? turn the rotor by hand. then connect any 2 out of 3 phase wires together. see if the motor gets harder to turn when phases are connected. repeat this 3 times to check every ph...