Endless Sphere

... ... ... Version 20 alpha 1 cadence worked. Version 20 beta 1 from Buba's own drive cadence worked. Version 20 beta 1 from Buba's drive on that LCD3 with the official version 20 beta 1 on the TSDZ2 cadence does not work. Thanks for your feedback Have you a link to "Version 20 beta 1 from Bu...

The page about improving the heat dissipation from the motor is ready: https://github.com/najbyk/TSDZ2-cooling/wiki Any suggestions are appreciated. Before making an improvement, it is worth doing a continuous engine power test at a constant temperature. To be able to compare the results after impr...

Minatauro wrote: ↑

Oct 01 2019 9:06am

hi just had a quick look there as was going to update my lcd3, it appears that the ktlcd3 file is a .bin instead of .hex? first time flashing lcd3 but i thought both were hex files.

You are right
Both file must be .hex
There must have been a problem in the deployment process

Ok, thanks But the "Return 0" at the end of the main is necessary ? No problem! It is not necessary in the current form but you do not need to remove it. It is just a warning.You can do however you like. I have compiled and tested the latest version on your GitHub. The current reading is ...

Ok, thanks
But the "Return 0" at the end of the main is necessary ?

Hi,
I'd like to know if the following warning messages in normal when compile a new release :

...
main.c:125: warning 126: unreachable code
....
....
main.c:83: warning 126: unreachable code

The instruction "Return 0" at the end of the main.c was the cause ?

Thanks

I also think that a basic requirement of a bicycle display should be ease of reading in all conditions. The KT-LCD3 on this I believe is absolutely unbeatable. I understand that for the memory problem it will not be possible to insert all the new functions, but it would be nice to have the basic fea...

Hi guys, sorry, maybe the topic has already been treated but now there are hundreds of pages and it's not easy to find what you need. I have a strong mecanical play on the crown, the engine is a 48V and will have done 500-600Km I enclose a video ..... Do I have to worry? What can be done ? [youtube]...

Hi Buba,
installed A8, all ok.
The debounce on walk assist in now perfect.

Thanks
The eMtb was impoved a lot but ,for me, It Is only usabile in certain situation.

Hi Buba, it's possibile to have more filtered values in sub-field where it's show the istantaneous Amp absorbed and fill the First character with a symbol like "A" ? I think it's a good thinks fill, where it's possibile, all the first character of any sub-field to improve readibility. Thanks

Hi,
it's possibile to have more filtered values in sub-field where it's show the istantaneous Amp absorbed and fill the First character with a symbol like "A" ?
I think it's a good thinks fill, where it's possibile, all the first character of any sub-field ti improve readibility.

Thanks

You can flash .ihx whitout change extention

Okay, thank you! Hmm... So your measurement on the display is off by around 0.8 %. I am not sure what it can be. Maybe related to the TSDZ2 hardware and caused by the riding weather, location, environment, etc. But I can not confirm this as more users need to validate the measurements. I do not thi...

EDIT: This is really important so I want to throw out one last comment for anyone interested: the margin between the min and max limit should be as large as possible. So set the max limit to a value you feel is almost at the edge of safe operation. Maybe 90 degrees Celsius? And then have the min li...

Was the ambient temperature above 20 degrees Celsius? I am just trying to figure out what it might be because I want it to be accurate for all users. But if it is a hardware problem then I know that it has been present on all versions on the firmware and there is nothing we can do. On the display t...

If anyone gets to the hard max limit very often it is usually because the min limit is too high. Try lowering the min limit and it will help with a better thermal control. So if you have: Min: 75 °C Max: 85 °C Try: Min: 45 °C Max: 85 °C This will start to limit very, very slightly at 45 degrees and...

Now we are close to 40 ° and riding a bicycle is a real pain. I noticed that the voltmeter in the 20 version marks 0.5 volts less. Is it a problem with my battery or has anything changed compared to previous versions? Now I'm on holiday and have beautiful Mountains. On the A5 I found that the volta...

Yes, I'm sure The motor Is pratically new a d i've just installerd the temperature sensor. All my previous ride was in city Road. Now I'm on holiday and have beautiful Mountain. I have the same problem (0.18 and 0.19) and i belive andrea_104kg too. I think the motor is not suitable for long climbs ...

On the A5 I found that the voltage reported by the LCD3 compared to that measured with the Tester is 0.4V lower. How did you notice this? Can you confirm that it is only with the A5? Just checked with my battery and it shows the correct value. Ok, I'll test with another bike with A4 and let you kno...

Ok, are you saying that 0.19 could generate less heat on long climbs? We need to investigate and is difficult to evaluate. Also, are you sure your motor is ok? are you sure it is not a bit demagnetized due to over heat?? Yes, I'm sure The motor Is pratically new a d i've just installerd the tempera...

I have limited myself changing the FOC calculation in any meaningful way for the 0.20.0 as this needs to be validated and accurately measured. There is a way you can change FOC without touching his code, that is by adding more calculations on the main loop making the code more slower. Let's say you...

On the A5 I found that the voltage reported by the LCD3 compared to that measured with the Tester is 0.4V lower. How did you notice this? Can you confirm that it is only with the A5? Just checked with my battery and it shows the correct value. Ok, I'll test with another bike with A4 and let you know.

On the A5 I found that the voltage reported by the LCD3 compared to that measured with the Tester is 0.4V lower. Furthermore, today I finally tried the bike on a challenging mountain course, along with other "real electric bikes" and the only big problem encountered was the temperature tha...

Same here
A5 Flashed
All work fine and display filtering now was near perfect.
Very smoot acceleration, a pleasure

Here all Ok.
New bike, new installation with Alpha 4, all seem to work well.

Number of motor power change less quickly than A3 but still too quickly for me.
Seem the motor is more smooth in acceleration than before.
The symbol in navigation menu was very useful.

Big thanks