Endless Sphere

Sold!

Ok, looks like I'm parting this thing out. Let me know if you're interested. EEB frame and swingarm : --------------------------------------------------------------- $200 shipped Forks--------------------------------------------------------------------------------------------$65 shipped Rear shock--...

Hey Chin0, sorry for the late reply, I didn't enable "notify me when reply is posted"

I'd like to sell everything together, but will part everything out if I don't get an offer at the new price.


NEW PRICE: $1,000 for the roller plus shipping (U.S only)

Battery and charger: $700 shipped (U.S only)

Hi there, thought I'd put my eeb up for sale to see if there's any interest. I did sell the mobipus controller so the buyer will need to provide a controller of your choice. About the bike: This bike has seen a lot of different motors, from knock off hubs to a qs205, to now the qs120 (only one out t...

Sold!

Still available! New price $450 shipped in U.S

Hi, I'm asking $500 shipped in the U.S, for my bundle. You will get the following: -Certified Engineer Access in the Mobipus software (This will allow you to change settings like regen) -Wifi module and PC cable for changing setting through the tablet or the pc -Heatsink: (i had to cut a small corne...

EEB+QS120 test ride video: https://www.youtube.com/watch?v=1RaA5pf ... e=youtu.be

@E5j7r it's a rear fender for a honda crf 50. I think I got it on ebay for like $10. The front fender was on ebay as well, it was a little expensive, but not that expensive. Maybe they don't make them any more. I was able to put in a few hours on the chain guard and new peg mount. I was also able to...

@amberwolf ya it's also sharp af. @yermommy thanks for the note. That was a temp idea that has been scrapped. I should have the new setup done this week. By next weekend I should have a chain guard and new roller configuration. I'm also modifying the peg mount to be stronger and out of the way of th...

Finally got all the parts in and did the last bit of fitment to go for a test ride. So far I'm pretty happy with the results. Top speed is around 44 mph, pulled just under 12kw, 350A phase, 100A battery. There is still some tuning and some tweaks that need to happen, but pretty happy so far.

Got the waterjet parts today and was able to get the motor mount welded up. I also made a spacer for the rear hub which will shift it outward 30mm to get me in the ballpark of where I want the chainline to be. After some mock up I got the motor clamped and bolted onto the bike. I'll going to make th...

Made some progress on the build, but still waiting for the rear sprocket, hardware, and steel for wrap up. The swingarm has been extended to 8 1/4" it pretty solid for a test ride but will require more work for the abuse it will see. The waterjet sides also weren't done so I have the acrylic ones I ...

@ trazor thanks man! I wrapped up the cad on the side mounts this weekend and managed to make an acrylic version to get an idea of how it will look. I'm pretty happy with how it turned out and am planning on getting them waterjet so that I can make the mount out of aluminum. There will be some other...

Motor $350: https://www.aliexpress.com/item/4000076478471.html?spm=a2g0s.9042311.0.0.614e4c4d2OIcNl 13T sprocket$13: https://www.ebay.com/itm/223419406509 This is the closest I could find online. I can probably machine it a bit if its too small. Custom rear sprocket $103: https://sprocketspecialists...

Well the motor has just arrived which was lightning fast. I immediately hooked it up to the Mobipus for an rpm test. I was able to get it to spin over 4,600 rpm which is what QS is advertising. Just spinning it on the stand you can tell this motor is an absolute beast, I really can't wait to get it ...

Well got the Big Block sold, on to the next one. Placed an order with QS for the 138 2000w mid drive motor with 12t 428 sprocket. You know what they say "No QS Motor, No super EVs!". I think I'll finally be happy with the bike if I can make it work. Power wheelies should be no problem and hill climb...

As far as temp sensors there's a few ways you could go. I ordered some lm35 because my Mobipus can read them, but they haven't shown up yet. I would go with the link below and epoxy it inside the motor. You can do this by drilling a hole near where the wires exit the motor and epoxy it inside. The m...

John, thanks for the reply. The motor is from the link below. The kit is for an eeb, I modded the bracket to run right side drive on my eeb. The black bracket next to the motor is all that comes with it (from the kit) to mount it.You can see a video of it running on my eeb on my YouTube channel. htt...

Kelly controller ( KDS48200E) 48v 200A Dc motor controller and programming cable------$70 shipped MY1020 36v 800w DC motor------------- $40 shipped EEB 42t (crank) sprocket (NEW) ----------$25 shipped U.S buyers only! Let me know if you want more pics or need more info on any of the items. Thanks fo...

Made a bit of progress with it all, mainly in getting the pegs mounted which is so much better than the pedals! A bit of bad news with the build. I've come to the conclusion that the motor is just a little too small for my power needs. The motor performance isn't too bad, it's capable of putting out...

Yeah don't skimp on the battery, that's the heart of the bike. It's a bit pricey but I was ok with paying because I didn't have a spot welder at the time. If you want to save some cash you could build it yourself if you feel comfortable enough. I build my packs now, but it's kind of nice to just pay...

Nice fab man. Looking forward to seeing this rip.

I have the battery below, it fits perfectly and has been problem free.

https://em3ev.com/shop/em3ev-72v-20s10p ... ah-29-5ah/

mcclead, welcome to the forum. You can run a 2.5" wide tire on that rim, I've run a few different types. Right now I'm running a shinko 241 and it's 2.75" wide. I've also run a dunlop knobby (70/100-19), you can run just about any motorcycle tire that's 19". Hope that helps. Well I was able to get t...