Search found 341 matches

by Byte
Feb 18, 2018 8:16 am
Forum: E-Bike Non-hub Motor Drives
Topic: Specs Performance for 80-100 motor ?
Replies: 63
Views: 2447

Re: Specs Performance for 80-100 motor ?

I also searched for a long time for detailed specs on these motors, but could never find anything useful. I think it doesn't exists because it is a motor intended for hobby purposes. My Castle Creations 160HV measured over 13.000 Watts with 10S, however I don't know how reliable that measurement is....
by Byte
Jan 19, 2018 5:20 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Aprilia E-sxv 50kw
Replies: 36
Views: 4025

Re: Aprilia E-sxv 50kw

try_all wrote:
Jan 11, 2018 5:24 am
yes i was running a 10kw goldemotor with kelly but it lacks power, i changed to sevcon size6 and different motor will post some updates soon
Very nice clean build!

Was it hard to program the sevcon? I have read stories about the programming which is very hard to do.
by Byte
Nov 24, 2017 5:03 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Help me choosing a 10kW continuous system
Replies: 27
Views: 2614

Re: Help me choosing a 10kW continuous system

Have anyone tested the new line of controllers from QS? The LBMC? They got a 72v700A almost at the bottom of the page in the link below. If my top of the math worked it should meet your 30 kw peak and then some, always good to have a little head room....it seems price are about three times the APT,...
by Byte
Nov 12, 2017 7:37 am
Forum: E-Bike Non-hub Motor Drives
Topic: Help me choosing a 10kW continuous system
Replies: 27
Views: 2614

Re: Help me choosing a 10kW continuous system

Cyclone seems to have a 18kW motor and controller ($549.- + $289.- excl. shipp.&tax): http://www.cyclone-tw.com/motor.html They are used on their ebike: I suppose that is 18kW peak? The motor looks rather small. I cannot find any datasheet on their website either? http://accelerated-systems.com/wp-...
by Byte
Oct 01, 2017 6:52 am
Forum: E-Bike Non-hub Motor Drives
Topic: Help me choosing a 10kW continuous system
Replies: 27
Views: 2614

Re: Help me choosing a 10kW continuous system

Cyclone seems to have a 18kW motor and controller ($549.- + $289.- excl. shipp.&tax): http://www.cyclone-tw.com/motor.html They are used on their ebike: I suppose that is 18kW peak? The motor looks rather small. I cannot find any datasheet on their website either? http://accelerated-systems.com/wp-...
by Byte
Sep 28, 2017 2:58 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Help me choosing a 10kW continuous system
Replies: 27
Views: 2614

Help me choosing a 10kW continuous system

Hi all! For a new project I am searching for a very powerful brushless system. My previous bikes were all build with RC components, topping out at 13kW peak power. Now, I am looking for more power, much more... I am seeking for help choosing a plug and play system for my new project. It will be a co...
by Byte
Aug 04, 2017 3:34 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Thank you for the reply. Unfortunately the ESC from APS that I was planning to use with the APS throttle interface went to ESC paradise. :D The good news is that it was a spectacular event. Now I switched all my efforts to learning everything that I can about VESC. So far so good. I was able to hoo...
by Byte
Jul 30, 2017 8:07 am
Forum: E-Bike Non-hub Motor Drives
Topic: Another 2-speed dogbox
Replies: 8
Views: 893

Re: Another 2-speed dogbox

A high-powered 2-speed is not for everyone, but I like the idea, and I would also like to see a cost-effective version. I can make a custom aluminum housing, but I am curious where to get the guts for the 2-speed, rather than make my own (like Thud's) I also like the idea of a 2-speed dogbox a lot....
by Byte
Jul 05, 2017 1:12 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Sn0wchyld's 12kw custom frame mid drive
Replies: 55
Views: 9761

Re: Sn0wchyld's 12kw custom frame mid drive

Any updates on this awesome build?
by Byte
Jun 27, 2017 4:56 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Hey Patrick, From what I remember you used APS throttle interface on your Number One. My APS interface has 3 wires: yellow, orange and brown and thumb throttle white, red and black. Can you post how you connected these two units together? I used the APS throttle in the past, I switched back to the ...
by Byte
Jun 04, 2017 5:52 am
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

spinningmagnets wrote:This build is very impressive...
https://www.electricbike.com/patricks-rc-mid-drive/
Awesome Ron! Very nice article to read!
by Byte
May 28, 2017 8:24 am
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Wow! Very impressive build :) Looks absolutely amazing How do you deal with police? Or do you...outrun them? :D I don't drive on streets with heavy traffic, so I never came across police yet. I don't know what I would do if I saw them actually :roll: I guess they police will be chasing to get pics ...
by Byte
May 14, 2017 2:52 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

I received three SLS printed parts out of Nylon. Originally they were white, I painted them black. They function as: - Sprocket/chain cover - Motor cover and extra cooling (two 40mm fans, one blowing in wind from the back of the motor, the other one from the side) - Electronics and wiring cover The ...
by Byte
Mar 31, 2017 11:55 am
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Nice build! What kind of riding do you use it for mainly? Up till now only for fun rides (hard accelerating and braking) in areas without too much traffic. Occassionaly I drive in the forrest, but the throttle is very sensitive and with all the bumps and imperfections in the road it leads to unwant...
by Byte
Mar 29, 2017 2:33 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Walk around.




Plastic motor, gearing and wiring cover still not ready. I am optimizing the airflow in the motor cover. Also ordered a new sprocket for the 100+ km/h run. But I will do that speedrun once this bike gets too boring for me, which will take a while I think :mrgreen:
by Byte
Mar 27, 2017 2:23 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Thank you for info and a cool drawing. It looks like it will be a tight squeeze to fit that motor into my design. So far, almost everything I ordered is out of stock, but according to Bruno he will be getting new delivery by mid March. So hopefully I will be getting my toys in a couple of weeks. On...
by Byte
Mar 10, 2017 1:30 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Would you care to tell us more about your problems with Alien controllers? Is the housing of 80100 motor 110 mm long, or part of the shaft is included in that dimension? I just ordered, about one week ago, C80100 Sensored Outrunner brushless motor 80KV 6000W with Alien 200A 3-16S Evolution 3 ESC HV...
by Byte
Mar 08, 2017 1:32 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

No it will need heat treatment. Personally i dont think that is something to make a problem. Should exist some kind of heat treatment company in every other town. And with aluminum you dont need that high temps. You're right. But I think it will be pretty expensive to design a frame and weld it by ...
by Byte
Mar 07, 2017 2:53 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Hey man awesome build. I love this build. I have been wanting to build a mid drive ebike for quite a while and have two questions 1. How much did this build cost you? Specifically how much did the cnc cost you? Also where did you get the 80-110 alien motor? I don't see them on their website anymore...
by Byte
Feb 08, 2017 2:09 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

That's a very nice build you have there, The voltage gauge is the only thing I'd swap to something with a watthour like the MHF-120300, it has memory so it remembers previous state of charge its easy to calibrate by holding clear button for three seconds, its bi directional so charging through the ...
by Byte
Feb 07, 2017 10:03 am
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

I completely assembled the drive unit. I also started assembly the battery box and electronics. The batteries are a very tight fit. It all feels very sturdy and it is very compact. The battery box is small and because it is underneath the frame, it keeps the COG very low. I think this is an almost p...
by Byte
Dec 23, 2016 12:08 pm
Forum: E-Bike Non-hub Motor Drives
Topic: The first and BEST Qulbix Raptor mid-drive build!
Replies: 298
Views: 25146

Re: The first and BEST Qulbix Raptor mid-drive build!

seeing you ride that bike makes it hard to supress my wish to build a high powered mid drive as well. i like my 2kW bike, great to ride, reliable and everything, but i doesn't wheelie at all. and for me a perfect ride has ALWAYS more power than you dare to use. then it's properly sized :) Believe i...
by Byte
Dec 18, 2016 6:26 am
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Re: Number One - 11.000 Watts

Assembling a few parts of the drive unit.


Image

Image

Image

Image
by Byte
Dec 15, 2016 3:53 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Number One - 11.000 Watts
Replies: 55
Views: 6916

Number One - 11.000 Watts

Number One A few years ago I build this E-bike: CLICK . The last few months I spent in CAD software working on an optimised version of this bike. My goal was to lower the centre of gravity, keep it lightweight, increase the reliability, improve the ergonomics, make it very fun to ride and – of cour...