Search found 1263 matches

by brumbrum
Jun 15 2019 8:42am
Forum: E-Bike General Discussion
Topic: DNM burner rcp-2s spring
Replies: 6
Views: 146

Re: DNM burner rcp-2s spring

Taken from Ti-Springs website "36.5mm ID Fitment - For Use With DVO Suspension, Cane Creek, BOS Suspension, Ohlins, Marzocchi, Manitou Shocks & X-Fusion Shocks" So springs made by those companies should fit

35mm and 38mm are also other standard sizes
by brumbrum
Jun 15 2019 2:53am
Forum: E-Bike General Discussion
Topic: DNM burner rcp-2s spring
Replies: 6
Views: 146

Re: DNM burner rcp-2s spring

There is a number punched on the spring. Ex.: .550 2.75 The first number is spring weight (lbs required to compress one inch), the second is the travel. Once you know the spring weight and travel that you need, you can buy the spring used or new, steel or titanium. I would first check for used ones...
by brumbrum
Jun 14 2019 4:06pm
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

^^^^^^^^^
As above :thumb:
by brumbrum
Jun 14 2019 1:34pm
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

After some riding I think I need to get a couple of centimeters closer to the handlebars. What's the best way of achieving this? Is there some kind of tilted raisers? Did you already move the seat all the way forward? Hi Adam, can you show what you use to quieten down the noise on the LMX 64.
by brumbrum
Jun 12 2019 1:37am
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

Adam said previously: Hello, the tension rollers are making some very minimal amount of noise compare the the chain rollers hitting the bottom of the sproket. We are checking other materials and items on the 64 sprocket noise reduction to improve further. Chain rollers hitting the bottom of the spr...
by brumbrum
Jun 11 2019 1:17pm
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

It looks to me that there has been absolutely nothing done on the front sprocket area what so ever to reduce the noise it makes. How is this? LMX boys showed in a video how the noise had now been reduced by using something to dampen the front sprocket which makes 100% of the noise. I hope your bike...
by brumbrum
Jun 11 2019 6:45am
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

It looks to me that there has been absolutely nothing done on the front sprocket area what so ever to reduce the noise it makes. How is this? LMX boys showed in a video how the noise had now been reduced by using something to dampen the front sprocket which makes 100% of the noise. I hope your bike ...
by brumbrum
Jun 08 2019 2:50am
Forum: E-Bike Technical
Topic: 1.60" or 1.85" wide rim for street?
Replies: 3
Views: 164

Re: 1.60" or 1.85" wide rim for street?

Probably make no difference apart from the weight penalty. Also depends on what width tyre you are thonking of running. I have a 1.4 and a 1.8 and both run a 3" off road tyre
by brumbrum
Jun 05 2019 1:10am
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

Yeah, no photos are showing.
by brumbrum
Jun 03 2019 10:28am
Forum: E-Bike General Discussion
Topic: UK ebike law.
Replies: 16
Views: 869

Re: UK ebike law.

I commute on a frame I made that is fitted with a g510 1000w motor in Sheffield UK, round trip is 32 miles. I fail to see how the current law could be enforced, the bike does not stand out, and it is not capable of silly speeds. The large motor mainly helps a lot on big hills, but on the average 16...
by brumbrum
Jun 02 2019 5:34am
Forum: E-Bike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 73
Views: 2479

Re: E-S LMX 64 Bike Owners

Sub'd. Only just stumbled on this thread. @CD Can you show photos of your front sprocket and surrounding parts. I'm still waiting on the boys at LMX to provide a noise dampener for my 161. It should be present on your bike. It has been promised by Adam, but as they have been ultra busy i havent push...
by brumbrum
May 18 2019 2:42am
Forum: E-Bike Technical
Topic: Good quality throttle
Replies: 11
Views: 460

Re: Good quality throttle

Classic... "some of the original governor said that the rain car will run itself, this is the legendary flying car, it will be very dangerous".
by brumbrum
May 18 2019 2:36am
Forum: E-Bike Technical
Topic: Good quality throttle
Replies: 11
Views: 460

Re: Good quality throttle

Can anyone guess from the advert in the throttle above if it is a mechanical wire pulley or a hydraulic one? The advert description is unlike any english mandarin i have encountered before :lol: I am assuming its just mechanical cable with a hall sensor in the coil? QUOTE: Name of motorcycle product...
by brumbrum
Mar 31 2019 7:49am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5077
Views: 513736

Re: Adaptto Mini-E/Max-E Owner's Thread

I do remember Allex once saying that the adaptto bms had an accuracy of plus/minus 20mv. When i built my battery pack i measured each individual cell before assembly and they were all within a few mv of each other. Once the pack was built and connected to the adaptto bms it read there was a 20mv dif...
by brumbrum
Mar 12 2019 5:36pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

Jonboy wrote:
Mar 12 2019 3:55pm
Printable?
Haaah! Maybe. I will need to get my hands on a prototype first. I ain’t seen one of these shrouds up close. Not sure how they have been made or how they dampen sound.
by brumbrum
Mar 10 2019 2:03pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

Jonboy wrote:
Mar 10 2019 12:20pm
When you offering me a go of this then.. :D
As soon as I get a noise reducing shroud for the front cog which I can hopefully get soon from the LMX boys.
by brumbrum
Mar 07 2019 3:59am
Forum: E-Bike Non-hub Motor Drives
Topic: LMX 64 : Freeride Ebike with dual drive and torque sensor
Replies: 231
Views: 17192

Re: LMX 64 : Freeride Ebike with dual drive and torque sensor

It's so amazing to see a couple of young guys doing pretty much everything in house and not having to rely on the far east for anything. True Endless Sphere guru's.
by brumbrum
Mar 04 2019 2:16am
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

brabantbike wrote:
Mar 03 2019 11:43am
Wow great bike!

What do these bikes cost in parts approximately?
If buying everything, startng with nothing probably over £4k gbp
by brumbrum
Mar 02 2019 2:09pm
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5077
Views: 513736

Re: Adaptto Mini-E/Max-E Owner's Thread

Hi everyone. I’ve just been balancing the battery pack on my bike with a Max-E through the BMS. Was fine an hour ago, then went to check on it and everything is off and won’t switch on again. Has anyone else had this happen? Did you resolve it? Don’t really know what to do next. Thanks. I had this ...
by brumbrum
Jan 06 2019 4:11am
Forum: E-Bike General Discussion
Topic: 200a Breaker Switch.
Replies: 12
Views: 441

Re: 200a Breaker Switch.

Any ideas guys on a shop I can find me a 200a breaker for my build please? Already have a 125a but my battery build should be good for 200a burst so want all I can get from it. Any help would be good help😁 Try out the 125a breaker first. You will probably find it will be ok. If you were drawing a c...
by brumbrum
Jan 04 2019 3:21am
Forum: E-Bike General Discussion
Topic: Need help picking ebike for 60-something Dad
Replies: 9
Views: 478

Re: Need help picking ebike for 60-something Dad

The specialized turbo levo is the must have emtb at the moment for sure. The new 2019 model has had a big overhaul and redesign from previous versions, so it maybe worth paying a little extra and getting this model rather than the 2018. Just buy the cheapest version and upgrade later if ever needed ...
by brumbrum
Dec 29 2018 1:16pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

Regnardin wrote:
Dec 29 2018 1:08pm
I have already contacted the support but no news! :?
It reminds me of the ignition wire you get on Lyen/infineon controllers.
by brumbrum
Dec 28 2018 6:35am
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

maitilupas wrote:
Dec 28 2018 3:39am
is that a circuit breaker and a shunt? in my shunt i use the negative not the positive and than connect the positive iginition ( 7 in case is kelly) also to the shunt
Maybe it is? I thought it was a circuit breaker with a pre-charge resistor built in.
by brumbrum
Dec 28 2018 2:47am
Forum: E-Bike Build Threads / Photos & Video
Topic: Andrew's LMX 161 Chain-drive massacre Build Log
Replies: 80
Views: 5467

Re: Andrew's LMX 161 Chain-drive massacre Build Log

Hello to you, I wanted to follow this pattern but unfortunately the result is not conclusive. Can you help me using my schema? I would be very grateful to you! http://image.noelshack.com/fichiers/2018/52/4/1545937128-wiring.png Have you tried measuring voltage across the various parts of your circu...