Search found 24 matches

by jlcortex
Jan 21 2020 12:28pm
Forum: Motor Technology
Topic: Axiom: a 100kW+ motor controller
Replies: 414
Views: 80198

Re: Axiom: a 100kW+ motor controller

Hello, someone has tested FF600R06ME3 from aliexpress?, prices are 1/4 the price at mouser! about 40€, is it possible?
by jlcortex
Jan 17 2020 5:11pm
Forum: Motor Technology
Topic: build a motor-generator based on a automotive alternator stator
Replies: 0
Views: 118

build a motor-generator based on a automotive alternator stator

hello all, I want to make a motor-generator of about 22kw based on this existing stator: as0005.JPG It is 48 slot 126mm internal diameter, it is for a 16 magnet rotor I would like some advice. I am drawing a IPM rotor because it seems easier than external magnets and more robust. I thought about a V...
by jlcortex
Dec 31 2019 4:50am
Forum: Motor Technology
Topic: Abyxx280, DIY Sensorless FOC ACIM motor controller.
Replies: 3
Views: 604

Re: Abyxx280, DIY Sensorless FOC ACIM motor controller.

Peters, At the moment I bought 6 IGBTs on EBAY, "Semikron SKM400GB126D IGBT Modul 1200V 470A", they are used, and have cost € 38 each. The capacitors are not selected, but I have seen that now the film DC-link capacitors are very popular and afordable. About software, i am thinking to use InstaSPIN,...
by jlcortex
Dec 28 2019 4:39pm
Forum: Motor Technology
Topic: Abyxx280, DIY Sensorless FOC ACIM motor controller.
Replies: 3
Views: 604

Re: Abyxx280, DIY Sensorless FOC ACIM motor controller.

Testing a 7.5kw motor with Sensorless FOC and a power supply of 32V!

by jlcortex
Dec 21 2019 7:50pm
Forum: Motor Technology
Topic: Abyxx280, DIY Sensorless FOC ACIM motor controller.
Replies: 3
Views: 604

Abyxx280, DIY Sensorless FOC ACIM motor controller.

Hi, I have been working all the Christmas holidays on this project. Probably too much ambitious project but I would like to do something important. It is maintly focus to rewinded induction motors, I help to test a rewinded 5.5kw induction motor, we get 32kw mechanical power on a brake dynamometer. ...
by jlcortex
Sep 09 2019 5:31pm
Forum: Motor Technology
Topic: BESC - beefed up VESC motor controller for high power ebikes
Replies: 141
Views: 18967

Re: BESC - beefed up VESC motor controller for high power ebikes

Hello Galp,

I am interested in a couple of this PCBs
Do you still have PCBs availables?
by jlcortex
Jun 11 2019 5:00pm
Forum: Alternative Energy
Topic: Build a 5m rotor diameter
Replies: 11
Views: 1309

Re: Build a 5m rotor diameter

I just realized that the 12V hub motors are not very popular, but some items can be found:
https://www.alibaba.com/product-detail/ ... 78a5MKzt68
by jlcortex
Jun 11 2019 4:16pm
Forum: Alternative Energy
Topic: Build a 5m rotor diameter
Replies: 11
Views: 1309

Re: Build a 5m rotor diameter

Hillhater, I am meaning 12V hubmotor spinning at 5X the nominal speed so it will be 60V, rated current will be about 42A. The hub motor is a huge electric motor, the power is low because the RPM is very low, but I think nothing prevents the engine from spinning much faster than it does on a bike. th...
by jlcortex
Jun 10 2019 3:53pm
Forum: Alternative Energy
Topic: Build a 5m rotor diameter
Replies: 11
Views: 1309

Re: Build a 5m rotor diameter

Captura2.PNG
Captura2.PNG (342.82 KiB) Viewed 1184 times
I like horizontal wind turbines. About hub motor, I see hub motors very simple, reliable and cheap. I am thinking about use a 500W 12V hub motor at 5X the nominal speed to get 2500W, it is very big motor, i think 2500W is not problem if it spin 5 times faster.
by jlcortex
Jun 09 2019 6:25am
Forum: Alternative Energy
Topic: Build a 5m rotor diameter
Replies: 11
Views: 1309

Build a 5m rotor diameter

I'm thinking of starting a serious project In my opinion if you build a wind turbine you have to make it big, What do you think? Rotor diameter = 5m A 5m rotor can get more than 5000W but I would like to optimize for slow wind, about 6m/s, I am calculating 2500W or so. I am thinking to build blades ...
by jlcortex
Aug 06 2017 3:13pm
Forum: E-Bike Non-hub Motor Drives
Topic: small and light but powerful middrive?
Replies: 4
Views: 1161

Re: small and light but powerful middrive?

I will receive one of those kits next week, I have bought a 1680w kit and a 3000w with 60A Bluetooth controller.
Perhaps i have to try the 60A controller with the 1680W motor

How do you get 5000W with this motor? What current and voltage do you use? Which controller do you use?
by jlcortex
Aug 06 2017 7:58am
Forum: E-Bike Non-hub Motor Drives
Topic: small and light but powerful middrive?
Replies: 4
Views: 1161

small and light but powerful middrive?

Hello, I am thinking about a powerful invisible middrive and i have found this product from GNG Electric. I think it is good idea, probably it is smaller, i am thinking about use RC helicopter brushless motors, this motors can get a power peak of about 6000W and a continuous 3000W (i have tested a h...
by jlcortex
Aug 06 2017 7:21am
Forum: E-Bike Non-hub Motor Drives
Topic: PARADOX KINETICS
Replies: 5
Views: 2542

Re: PARADOX KINETICS

It is an interesting design to get very light and small mid drive with very big power output but someone knows if it has a planetary gearbox after primary belt drive? I mean i count this tooth ratios: 48:14 35:14 if there are no planetary gearbox between this then total gear ratio is only 1:8.5 with...
by jlcortex
Jan 18 2017 3:45pm
Forum: E-Bike Non-hub Motor Drives
Topic: my ebike project, the cortex-bike 2.0!
Replies: 10
Views: 1514

Re: my ebike project, the cortex-bike 2.0!

boisrondevens, Graphic explanation:
comprimido.PNG
comprimido.PNG (206.44 KiB) Viewed 1214 times
by jlcortex
Jan 16 2017 3:48pm
Forum: E-Bike Non-hub Motor Drives
Topic: my ebike project, the cortex-bike 2.0!
Replies: 10
Views: 1514

Re: my ebike project, the cortex-bike 2.0!

Wheazel: The geometry is inspired in several bikes, this suspension is similar to SantaCruz V10, I bought the linkage software, it is very interesting software, it is really fast to develop a suspension mechanism because you can draw the link points. This mechanism works very similar to santacruz V1...
by jlcortex
Jan 14 2017 4:04pm
Forum: E-Bike Non-hub Motor Drives
Topic: my ebike project, the cortex-bike 2.0!
Replies: 10
Views: 1514

my ebike project, the cortex-bike 2.0!

I want to build this, what do you think? 1.PNG 3.PNG The initial idea is a bike to make electric enduro. It is a bike similar to the steath B52, Vector, Qulbix Q76R, Bultaco Brinco. Neematic ... With respect to most of them the difference is to use middrive (neematic also uses middrive) and maintly ...
by jlcortex
Oct 24 2013 9:10am
Forum: Items for Sale - New
Topic: Turnigy 80-100 Motors $125
Replies: 25
Views: 10655

Re: Turnigy 80-100 Motors $125

I have a bike project: http://endless-sphere.com/forums/viewtopic.php?f=28&t=54564&hilit=cortex I have thought to use a C80100-KV130 EMP or Turnigy 80-100-B 130kv I am searching days and days about this motor and there are no stock anywhere. I have contact manufacturer and they said "it did not sell...
by jlcortex
Oct 20 2013 4:38am
Forum: E-Bike Non-hub Motor Drives
Topic: my ebike project, the cortex-bike!
Replies: 3
Views: 1104

Re: my ebike project, the cortex-bike!

And the first pictures of the bike

Image
by jlcortex
Oct 20 2013 4:36am
Forum: E-Bike Non-hub Motor Drives
Topic: my ebike project, the cortex-bike!
Replies: 3
Views: 1104

my ebike project, the cortex-bike!

Hello, I would like to show you my ebike project. It is based on a downhill bike with 20" rims. I started this project 2 years ago but it keeps stopped in a friend garage. A couple of days he call me on another matter and i told him to bring me the bike. I forgot than the bike was so finished. Obvio...
by jlcortex
Feb 19 2011 2:34pm
Forum: Motor Technology
Topic: custom 22kw outrunner for ultralight aricraft
Replies: 10
Views: 3104

Re: custom 22kw outrunner for ultralight aricraft

Thanks rolf_w, EMRAX seems a great product I have also asked EMRAX, 2400 is a reasonable price for well build axial flux 50kW (33kw continues) power motor. geigerengineering seems more expensive (comparatively) http://www.flytec.ch/e-drive/home.htm 10kW $2700 + drive $1680 + batteries!, 8kw = 3000â...
by jlcortex
Feb 14 2011 5:25pm
Forum: Motor Technology
Topic: custom 22kw outrunner for ultralight aricraft
Replies: 10
Views: 3104

custom 22kw outrunner for ultralight aricraft

hello, we have a project to install a electric motor in a real ultralight aircraft, probably a single seat. I am searching motors, but i can see it is difficult to found upper to 10Kw brushless motors. in fact i have only found "YUNEEC" motors I am thinking than it could be funny to build a big dire...
by jlcortex
Jan 31 2011 1:48pm
Forum: Motor Technology
Topic: alternator to eddycurrent brake conversion
Replies: 7
Views: 3081

alternator to eddycurrent brake conversion

Hello I am building a dynamometer for brushless based on automotive alternator. I am using small motor but some friend are asking me to fit bigger motor. I have removed diodes and i have solder 3 phases together. then i have removed regulator and i excite coil directly, it works perfect! seeing it w...