Search found 314 matches

by stuntmanmike
Nov 28, 2017 7:55 pm
Forum: Items for Sale - Used
Topic: Yeti 303 RD-h frame and Fox dhx 5 Shock
Replies: 2
Views: 299

Yeti 303 RD-h frame and Fox dhx 5 Shock

I have a very clean Yeti 303 frame that I’m not using. I was going to add a motor to it but instead went with a different frame. It’s super clean as you can see from the pics and would make an excellent e bike, comes with a Fox DHX 5 rear shock in equally good condition. Make me an offer you may be ...
by stuntmanmike
Nov 28, 2017 7:35 pm
Forum: Items for Sale - Used
Topic: HPC 1200w Bafang bbso2
Replies: 2
Views: 230

Re: HPC 1200w Bafang bbso2

Really for the 750w? Well that sucks...I wish I could say I didn’t pay more for it but I did.
Thanks man.
Le$$on learned.
by stuntmanmike
Nov 26, 2017 9:42 pm
Forum: Items for Sale - Used
Topic: HPC 1200w Bafang bbso2
Replies: 2
Views: 230

HPC 1200w Bafang bbso2

This listing is for a brand new never mounted 750w bbso2 somehow modified to 1200w by High Powered Cycles. Through software programming profiles they claim this unit will put out 1200w at 48v along with their gearing. Please check here for all the details: http://www.hi-powercycles.com/1200w-hpc-mid...
by stuntmanmike
Nov 26, 2017 8:34 pm
Forum: Items for Sale - Used
Topic: Devinci Drive
Replies: 2
Views: 281

Devinci Drive

I bought this a few years ago for a build I never completed. I realized when I was 3/4 of the way there when I had chain problems and I didn’t know enough that my build idea would never be what I envisioned. So this was put in a box and shelved until now. It will come with 2 rubberized cnc frame mou...
by stuntmanmike
Nov 23, 2017 7:46 pm
Forum: Items Wanted
Topic: Looking for a Kona Stinky or similar bike/frame
Replies: 2
Views: 185

Re: Looking for a Kona Stinky or similar bike/frame

I have a mongoose boot’r frame(m) with a 5th element shock that I’ll sell cheap or trade for whatever, try me.
by stuntmanmike
Nov 22, 2017 11:32 am
Forum: E-Bike Non-hub Motor Drives
Topic: Dave's 80:1 RC mid drive kit build log
Replies: 763
Views: 81142

Re: Dave's 80:1 RC mid drive kit build log

Hey Dave, I finally got around to building my Tangent Bike(Nicolai Helius AFT) which thankfully, is almost done. I think I may have bought one of the first kits you made back in 2015? Believe it or not it sat in it's box for the last two years while I straightened out my life... I did however, acqui...
by stuntmanmike
Nov 21, 2017 8:46 pm
Forum: E-Bike Non-hub Motor Drives
Topic: AFT 5kw 29er mid drive
Replies: 13
Views: 1686

Re: AFT 5kw 29er mid drive

Welcome Very nice, clean build. I built an AFT bike a few years ago, once I had it all in place and properly adjusted it’s never let me down. I did run into some problems in the beginning with frame slip where I bent the whole structure but that was truly my own fault. I replaced the main structure ...
by stuntmanmike
Nov 21, 2017 8:21 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Recommended BMX sprocket at a reasonable price?
Replies: 1
Views: 125

Re: Recommended BMX sprocket at a reasonable price?

I Still ride BMX, For high quality look at White Industries eno freewheels. BMX sprockets are much more reasonably priced compared to mountain bike stuff. Check Profile Racing they have so many options and tooth counts and everything they make is super high quality US made. But if you wanna go cheap...
by stuntmanmike
Nov 19, 2017 1:32 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Mini Cyclone on carbon full suspension
Replies: 109
Views: 10343

Re: Mini Cyclone on carbon full suspension

The Cyclone 3000w is NOT silent and stealthy like the BBS-HD, but it has a lot more torque... More torque than needed in the woods using 14s 16000Mahr HobbyKing Lipo 52v nomial 58.v8 charged. The highest the stock Cyclone 3000w controller pulled was 58.4 volts at 39.2 Amps.... without any modificat...
by stuntmanmike
Sep 04, 2016 10:44 am
Forum: Stand-up E-scooters and E-skateboards
Topic: Ripper 2.0
Replies: 0
Views: 308

Ripper 2.0

I built my original Ripper mountain board about three years ago & in that time I learned a lot about what worked & what didn't. Recently a friend of mine commissioned me to build one for his son and I reluctantly obliged. Not that I didn't want to build him one, I just had to find the time to do it....
by stuntmanmike
Jul 30, 2016 10:13 am
Forum: Stand-up E-scooters and E-skateboards
Topic: **New arrival** LeifTech electric "Freebord"
Replies: 14
Views: 1142

**New arrival** LeifTech electric "Freebord"

I pre-ordered my LeifTech in spring 2015 & got it on Wednesday. Aaron the owner of LT is one hell of a nice guy that is doing his very best to fill all orders on time and to keep things at the agreed price point. I have been building electric skateboard for a long time and had thoughts starting my o...
by stuntmanmike
Jul 02, 2016 4:46 am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

torqueboards wrote:Sweet build. I've always wanted one of those loaded pokes.. Price point is too high though for a deck :(
You only live once & you cant take it with you...Go big or stay home.
by stuntmanmike
Jul 01, 2016 2:23 pm
Forum: Stand-up E-scooters and E-skateboards
Topic: e-Loaded "Fat Tail"
Replies: 2
Views: 319

Re: e-Loaded "Fat Tail"

Everyone wants to know what enclosures I use, it's funny. But it's actually the battery compartment from a Thunder Tiger RC monster truck the MT4g3. You can get them pretty cheap on ebay but you'll need to remove some material from the inside & extend the latches with 1/4" spacers to fit 6s lipos as...
by stuntmanmike
Jul 01, 2016 6:56 am
Forum: Stand-up E-scooters and E-skateboards
Topic: e-Loaded "Fat Tail"
Replies: 2
Views: 319

e-Loaded "Fat Tail"

I've been building & selling the boards that I make locally over the last year or so. My formula is to keep it simple to give it the "too few parts to run" look. So far I've sold eight in total. I use Loaded brand decks exclusively because I feel they're just made better. For this one I wanted the l...
by stuntmanmike
Jul 01, 2016 6:12 am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

^^You're right I have that reversed, sorry.
Higher ratio means more torque and acceleration, but lower top speed. Lower ratio means less torque, more heat, higher top speed. Using a smaller pinion or larger hub is to lower the gearing. Using a larger pinion or smaller hub is raising the gearing.
by stuntmanmike
Jun 30, 2016 6:46 am
Forum: Stand-up E-scooters and E-skateboards
Topic: Help required!! First build - Trampa E mountain board
Replies: 7
Views: 501

Re: Help required!! First build - Trampa E mountain board

Thanks for the suggestions guys. Im just tossing up between an 8s setup with the escs mentioned or 10s torqueboards esc. I have a little thinking and number crunching to do! Just another question, if i were to use power tool batterys in 5s2p with there own bms could i just series 2 batterys and the...
by stuntmanmike
Jun 30, 2016 6:34 am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

So as a beginner I guess the one attached to the motor (pulley?) is supposed to be smaller then on a fast board if I want it to be strong? Skickat från min Nexus 5X via Tapatalk Like a remote control car; the smaller the pinion or motor pulley the higher the top end, a larger pinion will make it fa...
by stuntmanmike
Jun 29, 2016 7:37 am
Forum: Stand-up E-scooters and E-skateboards
Topic: Help required!! First build - Trampa E mountain board
Replies: 7
Views: 501

Re: Help required!! First build - Trampa E mountain board

I've just ordered a Trampa Holypro 35 degree Mountain board with Ultimate trucks, superstar hubs with road tyres. My plans so far are along the lines of E-Toxx mounts with chain drive, twin 6374 168KV or 192KV SK3 (or APS 6390 at 170KV) modified GT2B controller from DIY The ESC and battery is where...
by stuntmanmike
Jun 27, 2016 7:30 pm
Forum: Stand-up E-scooters and E-skateboards
Topic: NOOBIE RUN-TIME + BATTERY + MOTOR QUESTIONS
Replies: 7
Views: 380

Re: NOOBIE RUN-TIME + BATTERY + MOTOR QUESTIONS

hey man, I think you'd save a lot of time & grief by going with a castle creations mamba monster 2 straight away. The mamba is very high quality(6s max) & is easily programmed with the castle link adapter. The hobbyking ones are cheap Chinese garbage that will burn up. Spend more money the first tim...
by stuntmanmike
Jun 27, 2016 6:55 pm
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

I live around New York City and its quite flat here but in testing I found that It could climb a hill as fast as i could go down one. I weigh 185 lbs and it doesn't strain or get warm even on long burner hills. This i attribute to having the correct pulley and hub gearing.
by stuntmanmike
Jun 14, 2016 7:57 am
Forum: Stand-up E-scooters and E-skateboards
Topic: Dual Drive single motor MTB
Replies: 8
Views: 817

Re: Dual Drive single motor MTB

Very nice! Is a differential being used? Or is it positive traction? If you check out the Lagrange L1 by Red Rocks board shop they did something very similar with a Surf Rodz precision truck. I built my dual motor mountain board using two 245kv 63mm out runners & it's really fast. One of these motor...
by stuntmanmike
Jun 13, 2016 8:48 pm
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

thanks man, I set the brakes to 70%, it's pretty much perfect at that. I have a few other builds which I have VeSC's in place but I love the unabashed power of the Mamba. It's just so simple & rugged. The enclosure is from a Thunder Tiger Rc Monster truck the mt4g3. I use these on most of my boards....
by stuntmanmike
Jun 12, 2016 7:42 am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

Thanks man,
I'm sure you haven't been idle either, what's on your drawing board these days psychotiller?
by stuntmanmike
Jun 12, 2016 6:50 am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-Loaded "Polk"
Replies: 14
Views: 843

Re: E-Loaded "Polk"

I should mention that the drive bracket came from Richard at Alien Drive & once again they're top shelf, machined to perfection. Thanks man, I had to take a hiatus for a while but I'm back now & healthier than ever. I'm running this one at 6s w/a 8000mah Lipo brick, the battery compartment can hold ...