Endless Sphere

Luka2134 aluminum rhs 3mm, marine grade 5083

Looks very professional , i can imagine the standard of scooter

Still available. 225 + free aus registered shipping extended indefinitely

ITS TIME! Swingarm time that is, got some billet laying around so im either going to go with clamping droupout or slotted with bolted end cap....
The trick is a deign that fits the bill and is the easiest for both welder and machinist resulting in a cheaper outcome also , stay tuned.

Very nice !! can we see more photos especially your swingarm .. im doing mine now

Received my tyre for the hub , looks good should fit the bill, as with every custom build there is always a bit of anx with ordering parts online, but this will give me the suspension travel i want as its only 12.5 '' od much better than the original 15'' tyre that came with the hub , the extra clea...

As posted earlier concerning the 10mm misalignment of stator to magnets, i also had a axel droupout offsett. Looks like my hunch was right , after reinstalling stator 180 deg ive now got a very good stator magnet alignment and a centred axel. Quite shocking the manufacturer couldnt even assemble the...

Sorry i missed your post ill pm you.

Ive seen all sorts of butchery removing stators like That.. even from cowboy manufacturers .. then using a risky non controlled / violent Method to reinstall stator is entertainment [ watch those fingers :shock: ] anyway.....enough said and back to build. For the sake of anyone doing this for the fi...

Seen that method and variations not a fan as its possible to damage end windings and scrape magnets ect ..... The pic was getting first cover off...
Ill show my method For anyone interested as soon as i tested it, for removal and reinsertion of stator without risk of damage.

My motor finally landed its a 8 inch rim 11kg with tyre , the seller was super vague on magnet height ect... so i went with my gut feeling and was right its 50mm stator width :D : with a 147 diametre :mrgreen: should have loads of tourque. But the magnets and stator arnt aligned [ 10mm ] im working ...

Alex What is the stator diameter in mm , 100mm? on that 60mm wide stator.
The last rewind was 7turn i think .?
What are your temp stats compared/ acceleration/ torque

Down tube done, The welder excelled on these welds i call him ''the bot'' now.
Front axle perfectly inline and a good bit of rake, Thats one of the most critical parts to this frame , onto the next part....

Front corners cut off getting rid of the weak welds ..looks better and stronger to boot.
After re cutting front down tube [ fork rake ] i hand filed mating surface so the fork/ wheel is perrrfectly aligned and i will hold it in place while welder tacks it.This is the most critical part now.

Still available folks

Nice scooter Roncat
That qs hub should be more than enough torque , what is the magnet width 35/40mm ?
If so cant see any reason why you couldnt give it 8kw burst .
Look forward to your first ride impressions

Here is a shot of my boss bearing idea small compact and dam strong ..no welding needed :) interference fit and secured with 8 m6 countersunk stainless steel socket head cap screws, removable to service the bearings. More welding art from the guy ive finally found to be the best, after a lot of tria...

Yeah DEHiCKA
Lets see if the Qs redesign in the future for a better pathway

The life challenges i spoke of before where i had to go to hospital for a procedure as the wanted to have a good look at me... i had to wait 7 months,But results where ALLLL GOOD :mrgreen: . So im in a much better frame of mind to move forward on this scooter. Might take a step back on motor size as...

Yeah still here

Life is throwing its challenges at me atm like never before... and slowing the build add to that Chinese new year , but that's not going to stop me right!! So a while back the engineer drilled the fork pivot of center well thats fixed now with a brass bush, and alloy front wheel spacer done. All nic...

Pyon if you mean motor im still working out details with motor suppler so ill post link when i get it, that way ill know if he's worth sharing or not . And yeah its a 8 inch rim. So far he has been the best with details, some suppliers cant even answer questions , its been 2 weeks of emailing to nar...

Hi Emoto, have you decided on your hub wheel yet? I was looking into hub wheel but could not find a decent ATV tyre to match it on 14/15inch (tyre size), so i gave up and went for 6" Kart wheels instead. Looking forward the rest of your build progressing :) YES finally decided on motor will post to...

So im wondering what was that magic figure final frame only weight including handle bar clamp and downtube , without shocks

So... 225 + free aus registered shipping extended indefinitely