Endless Sphere

Dear friends, We've released the new firmware which is already available on the web-site. -The problem with saving throttle/brake limits is solved. -Fixed the bug which caused blinking display once switching on the controller with high-voltage battery -Eliminated custom logo on loading screen (appea...

For those who have problems with saving throttle curves, Adaptto are working on this and will release new firmware shortly! Dear friends, We've released the new firmware which is already available on the web-site. -The problem with saving throttle/brake limits is solved. -Fixed the bug which caused...

Are there any official or other plug-and-play throttle, brake and e-brake controls for the Adaptto? Something that doesn't require crimping or soldering. Hello, Unfortunately there are no official (or plug-and-play) throttles. However we've got the plans to launch production of our throttles compat...

Started adaptto first time, went to bathroon and friend touched. When i came back screen says enter password :shock: Someone knows what is the default password or how to fix it? Hello, If you have set the password before - just enter it. If you don't remember your password - the only way would be t...

Hello, Existing controllers have no more memory for adding new features, that is why the support of torque sensor will not be added. Best regards, Thank you for the quick response, and I second the question below from wannesd (memory is cheap :) ) Will there be a new version with more memory and ad...

Hello, 1) Our controllers don't support torque sensors currently. To the Adaptto team: Is there any hope / plans that Adaptto will support a torque sensor like CA? PAS mode is not only necessary for legal reasons, but it is also a great way to use the bike for a workout. Torque sensors provide a mu...

I have contacted Oleg, but no rely as yet. praps andreym might know about this...or maybe allex. Cheers RTL I have also contacted adaptto through their technical support about sending my controller back to Russia but i have not heard anything back as yet :( I may try Messaging Oleg too. Hi guys, Ar...

I´m starting to have the same concers about Adaptto as Greenlight. I had the same issue out of the box where the controller judt started flashing up, only turning on 1 out of 10 times. Throttle was acting wierd, all in all only problems. After checking every possibility I found a faulty soldering j...

Thanks Adaptto. I also see the !BMS! indication when I power-up my system. It stays for a second or two then disappears. My BMS works correctly. I'm just wondering if it is normal to see this warning for a few seconds on power-up. Thanks Hello, don't worry about this. During the switching on contro...

what is the !BMS! error? and all of my bms status show NO? !BMS! error means that BMS has ENABLED status in BMS Setup BUT in fact the controller does not get the signal from BMS. It is often caused by incorrect wiring OR distortions OR problems with the connector. If all this is 100% fine and BMS i...

Can we have the email for the Boston location, please. And, are they equipped to make repairs? Thanks As stated on our web-site: all the requests for Vector should be sent to info@vectorebike.com disregarding your location, just don't forget to mention Boston as a preferred selling point. They are ...

velias wrote:I wish they would concentrate on finding a U.S. dealer instead of a photo contest.

Hello,

One of our official dealers has just started supplying our products from three locations one of which is Boston (US).

http://adaptto.com/Dealers/

Best regards,

Dear Friends! By popular request the timings of our ADAPTTO Photo Challenge were extended until 29th of February. The open vote for winners will start on the 2nd of March. Don't miss your chance to participate and to win one of Adaptto controllers! Don't forget to pay attention to conditions of the ...

Hi Everyone!
It is less than a week left to take part in Adaptto Photo Challenge.
Don't miss your chance to win one of our controllers! Make a great photo of your build and follow some easy steps in order to participate!
Good Luck!

Hi Everyone!
It is less than a week left to take part in Adaptto Photo Challenge.
Don't miss your chance to win one of our controllers! Make a great photo of your build and follow some easy steps in order to participate!
Good Luck!

Ah ok, sounds good. I just need it to be close to "legal" so I can bluff if needs be. Am I right in thinking that there is special firmware that adaptto can provide that helps with this as it sets it as default mode when powered on? Hello, 1) Our controllers don't support torque sensors currently. ...

frlecmatjaz wrote:I have some questions regarding the ADAPTTO controllers:

1 - Do they work with non hub motors - especially BIG BLOCK motors ?
2 - Anyone got a some dimensions of the display unit - inside/outside spacing between the mounts ? A drawing would be most welcome.

Thanks !

Sent PM.

Best regards,

DasDouble wrote:

Adaptto E-Drives Lab wrote:

Mammalian04 wrote:EDITED:

Did I understand that right? This firmware is in every controller of Adappto. Right?

No, if you need such firmware to be able to set password for switching between power profiles - you need to contact us via techsupport@adaptto.com.

Best regards,

EDITED: Adaptto E-Drives Lab, is this something you could post on your website or a link it here or should we all email you for the firmware? As a side question, why not on the web site? Thanks! Mammalian04 Hello, Such firmware is needed by only a small number of users. In addition regular firmware...

Hello Ebikers, I ordered one of those 10% discount e max controllers from Alex and expecting it soon. Till now I am using an Infineon controller which I can limit (when necessary :) ) to 25km/h max (unlimiting very difficult). Does anybody know how to make that possible with a max e Adaptto control...

Hello Everyone! Welcoming November and the season of new builds with a bunch of news: 1) Revised controllers (improved Power PCB) are now ready for sale! Each controller is equipped with PAS and On/Off switch by default from NOW! 2) Brand new Midi-E controller 3) Already 2 official dealers for more...

Hello Everyone! Welcoming November and the season of new builds with a bunch of news: 1) Revised controllers (improved Power PCB) are now ready for sale! Each controller is equipped with PAS and On/Off switch by default from NOW! 2) Brand new Midi-E controller 3) Already 2 official dealers for more...