Search found 182 matches

by ozman
May 31, 2016 6:15 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

Guys - for future reference there has been a couple of different pin-outs used over the past couple years for the throttle connector at the display end. If you use the throttle cable that came with the display - no problem. If you mix and match displays and throttle cables you may run into all sort...
by ozman
May 27, 2016 5:28 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

So i have two max-e contrllers ok. Set one of my bikes up couldn't get throttle to work. So i tried two other throttles one cheap hall type and another domino (i have 3 domino throttles btw) none seem to work even with resistor fix. So i get thinking i have another Adaptto controller sitting in the...
by ozman
May 27, 2016 3:21 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

So i have two max-e contrllers ok. Set one of my bikes up couldn't get throttle to work. So i tried two other throttles one cheap hall type and another domino (i have 3 domino throttles btw) none seem to work even with resistor fix. So i get thinking i have another Adaptto controller sitting in the ...
by ozman
Apr 16, 2016 12:41 am
Forum: E-Bike Photos & Video
Topic: Moonshine's Vector/MXUS/MaxE Build
Replies: 229
Views: 20846

Re: Moonshine's Vector/MXUS/MaxE Build

Congratulations Moonshine i hope you are getting some sleep he's a cute little bugger
by ozman
Apr 09, 2016 4:17 pm
Forum: E-Bike General Discussion
Topic: Newbie Retrofit build
Replies: 46
Views: 1625

Re: Newbie Retrofit build

Just buy a pre built 18650 pack with a charger and be done with it.
If you need somebody to give you a shopping list for lipo bits and pieces you need to do more research IMHO
by ozman
Apr 07, 2016 6:27 pm
Forum: E-Bike General Discussion
Topic: Newbie Retrofit build
Replies: 46
Views: 1625

Re: Newbie Retrofit build

5 out of the 16 packs Ypedal bought arrived in a condition he was not comfortable using them straight out of the box. :shock:
Hobbykings quality control is not so good.
by ozman
Apr 07, 2016 6:23 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

I snipped off the hall sensor for the brake and the throttle error on the opening page of the display has now disappeared, so thats a good thing. Hall signals are all reading the same as before, so thats a good thing. Battery readings all good too. I got my fingers crossed for you good luck hope al...
by ozman
Apr 07, 2016 3:38 am
Forum: E-Bike General Discussion
Topic: Newbie Retrofit build
Replies: 46
Views: 1625

Re: Newbie Retrofit build

Charging lipo while you sleep :shock:
Google the term lipo fires
by ozman
Apr 06, 2016 9:49 pm
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

I think I'm gunna need a bigger motor :D

The Mxus doesn't seem to like having 80 amps pushed through it for very long but it sure is fun.

I will give the ferro fluid a go but some how i think i might need a QS
by ozman
Apr 06, 2016 1:35 am
Forum: E-Bike General Discussion
Topic: Newbie Retrofit build
Replies: 46
Views: 1625

Re: Newbie Retrofit build

That is for parallel connection so you will still end up with 6s configuration
If you would like 12s you need a serial type adapter.
What batteries are you buying post a link.
by ozman
Apr 05, 2016 6:32 pm
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

thanks Mark. good to hear real reveiws. iv been looking for a serious helmet for a while now. just cant seem to settle on one i like. was looking at the try lee d2, bit exe. what model fox is it? Its a Fox Rampage I wanted to try the helmets on before i bought one and lucky i did because I had my m...
by ozman
Apr 05, 2016 8:16 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

from manual If, during the rotation of the motor numbers "y" sometimes takes the value of "0" or other sequence of digits, the hall sensors are not working properly, or motor sensors have an angle of 60 degree angle. (If 60 degrees - then you need to reverse one of the hall sensors in the motor, not...
by ozman
Apr 05, 2016 8:04 am
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

Hi RTL
I went to purchase the bell but after trying the Fox i couldn't justify spending twice the money for something very uncomfortable.
The fox helmet feels nice i like it cost me $160 bell is a good brand but it didn't fit my fat head as good as the Fox did
by ozman
Apr 05, 2016 7:16 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

Have you tried swapping two of the phase wires
I dont think turning the regen settings off will make any difference but who knows.
It mentions in the manual that autodetect will be interrupted if you release throttle or activate brake signal.
by ozman
Apr 05, 2016 7:02 am
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

Sounds good your going to have to go easy on me ive seen his vids of you guys riding. BTW: I saw your YouTube video of the car yesterday nice place you got there plenty of space i agree with CD build a race track :D Thanks I pretty lucky there is always a spare bed too :D I was a bit gun shy in tha...
by ozman
Apr 05, 2016 5:23 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

Hi Andrew try changing the wheel direction in settings + or - this worked for me or apply a very small amount of brake pressure while attempting autodetect only a very small amount.
If you have brakes with reed switches disconnect the switches first
by ozman
Apr 05, 2016 5:15 am
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

Sounds good your going to have to go easy on me ive seen his vids of you guys riding.
BTW: I saw your YouTube video of the car yesterday nice place you got there plenty of space i agree with CD build a race track :D
by ozman
Apr 05, 2016 4:40 am
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

Good to hear from you Kiwi. Funny you should mention overheating the MXUS I'm on holidays ATM so i put in some miles on the bike today and yes i reached 110 degrees Celsius no oil. Good thing about having the Adaptto when the MXUS got hot the controller won't let you abuse the motor any further. I w...
by ozman
Apr 03, 2016 7:05 am
Forum: Items for Sale - New
Topic: MXUS 3K Turbo (V3) 45mm Direct Drive Hub Motor
Replies: 147
Views: 21038

Re: MXUS 3K Turbo (V3) 45mm Direct Drive Hub Motor

Sorry I just checked my stats on the adaptto display i was pulling 9.8 killawatt so i was using more than 100 amps my girlfriend was following me in her car and advised i was doing 80km/h I will test again with gps and set up at 100 amps and report back btw: check out Moonshines vector thread he was...
by ozman
Apr 03, 2016 4:14 am
Forum: Items for Sale - New
Topic: AUS ally rims - still here.
Replies: 121
Views: 6913

Re: AUS ally rims - still here.

I'm using the Vee Rubber 308's as well
by ozman
Apr 02, 2016 9:21 am
Forum: E-Bike Technical
Topic: Eaton APR48-3G 1.8kW Light Compact Charger PSU
Replies: 113
Views: 13252

Re: Eaton APR48-3G 1.8kW Light Compact Charger PSU

Here ya go ill make it even easier for you.

Click on this link below.
http://adaptto.envolt.se/Products/ADDIT ... -APR48-3G/
by ozman
Apr 02, 2016 9:08 am
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 4757
Views: 338402

Re: Adaptto Mini-E/Max-E Owner's Thread

Wired up Domino today: Throttle is connected with internal switch for regen: DSC06953.jpg My firmware version: DSC06960.jpg The we do calibration: DSC06957.jpg DSC06958.jpg Ready to go! DSC06959.JPG Lol i wish it was that simple it should have been. I must have a dodgy display . Whats a new display...
by ozman
Apr 02, 2016 8:52 am
Forum: E-Bike Technical
Topic: Eaton APR48-3G 1.8kW Light Compact Charger PSU
Replies: 113
Views: 13252

Re: Eaton APR48-3G 1.8kW Light Compact Charger PSU

Yes the Eaton is perfect for Adaptto and batteries up to 24S Bulk charger is a common word around here, means that you charge all your packs together, often without balancing(without using BMS) Alright, I see. Please send me your bank-account via pm. so I can pay for it. Do you I have to pay after ...
by ozman
Apr 02, 2016 8:49 am
Forum: E-Bike Photos & Video
Topic: Vector, Adaptto, Mxus 3000 4T twin builds
Replies: 45
Views: 4152

Re: Vector, Adaptto, Mxus 3000 4T twin builds

Finally got 1 of the bikes up and running today after some troubles with a Adaptto display luckily i had another one sitting here that was meant for the other bike. I like the Adaptto system for charging it makes life easy and fast i charged my 27 amp hour pack at 15 amps today. The Adaptto Mxus 300...
by ozman
Apr 02, 2016 7:42 am
Forum: Items for Sale - New
Topic: MXUS 3K Turbo (V3) 45mm Direct Drive Hub Motor
Replies: 147
Views: 21038

Re: MXUS 3K Turbo (V3) 45mm Direct Drive Hub Motor

No two engines in one bike. I mean each engine individually in different bikes: 1. mxus 4T - 20s (lipo), 26 wheel - .......... km/h or m/ph ? 2. mxus 3T - 20s, (lipo) 26 wheel - .......... km/h or m/ph ? As for the comparison of the real speed of the motors at the wheel 26 and at this voltage. At 8...