Endless Sphere

Simply attach the Tork-Grip to the pedal wrench https://sheldonbrown.com/tork-grip.html

Looking at the new model of that bike on the sixthreezero website , I see a front fork with linear pull brakes. Try and contact their tech support to find out if they can sell you a fork and brake that can be swapped .

To use a New York term ; The other shoe has dropped. The word in the media, ( NPR etc. ) is that the new legislation to legalize E- Bikes and scooters has passed. https://nyc.streetsblog.org/2020/04/01/ ... dget-bill/

teaser ; https://www.teslarati.com/tesla-battery ... -electric/

I have had good results, many times, using long nose locking pliers ; https://www.amazon.com/VISE-GRIP-Origin ... 41&sr=1-14

Sensor pickup can be directional . When you go back and forth with the pedal, and the motor works , it could be activating on the reverse stroke. If so , remove the 2 screws that hold the sensor to the mounting ring. Turn the sensor and wire 1/2 turn , and remount it .

Press release, with video https://www.governor.ny.gov/news/govern ... y-measures

Charging stations , EV purchase rebates - https://www.governor.ny.gov/news/govern ... c-vehicles

ended up take a bike speedo meter so it runs independently. Btw, I tried to run the Yalu motor with KT controller. I managed to run it by change the Hall and Phase combination. But when run it runs slow, about 120 - 135 watts. It looks like there is current limiter or speed limiter. When I tried to...

Try contacting Doug at California E- Bike https://california-ebike.com/

With a constantly flashing light, there is a chance of triggering an epileptic seizure , or other unpleasant reaction. https://www.epilepsysociety.org.uk/phot ... e-epilepsy

Ye Olde Ampedbikes torque arm

Look for a identification number on the side of your light bulb and match it with one of these https://www.ebay.com/sch/i.html?_from=R ... t&_sacat=0

Sometimes it's better to move the rotor out with a spacer, but you may need slightly longer bolts too. Don't use a plastic spacer that comes with some motors.. That's just to keep the bolts from going in too far to the motor case while no rotor is mounted... It's too mushy for actual spacer-ing.s-l...

Gov. Cuomo is quoted as saying that he will propose a bill for legalizing e-bikes on January 8 . https://wnynewsnow.com/2019/12/27/cuomo ... -scooters/

Another Board Track Racer inspired Ebike - viewtopic.php?t=87236

Looks like address, followed by Zip code , followed by phone number , followed by extension number .

In general , red light on indicates power on . One side of the magnet disc has the letter " A " for active. The active side faces the sensor. Red light blinking while turning crank forward, every time magnet passes sensor, indicates sensor is working. Appears to be several versions of the KT-LCD8 . ...

video - teen killed riding E-scooter https://www.nbcnewyork.com/on-air/as-se ... 95722.html

news release - 11/21/2019 https://www.nj.com/union/2019/10/lime-e ... -them.html

The axle in the picture is round. The common 350W geared hub motor has a flatted axle and comes with anti-rotation washers. Position the tabs of these washers inside the frame slot for the axle.

If you know of any Black Friday Sales relevant to this forum , please share. EM3ev batteries 10% off -- https://em3ev.com/shop/black-friday-sal ... batteries/

Here is another version of the KT LCD8H manual http://www.szktdz.com/upload/file/20191105/20191105103044_78856.pdf . Note that it says that parameter program can be changed to customer needs. What that means is that KT will program the display to conform with the resellers requirements. So you would...