Search found 103 matches

by cruzxia
Jun 11 2019 7:08am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Rix
Still have my B52. With upgraded motor and battery. It is a rocketship.
I still ride every week. I have tryed a few other e bikes, but nothing compares to the stealth bikes.
Cruzxia
by cruzxia
Jun 09 2019 12:10am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Check a few settings in your DC1
1. Set the correct tire circumference. It affects th speed reading.
2. Check you don't have a speed limit set. Look in set limits. Set it as high as it will go.

Nice paint job. :thumb:
by cruzxia
Apr 11 2018 5:40am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

The new motor has an improved water proof connector for the hall/temp wires. So if you send Stealth your controller and DC-1 they will flash the latest software in both controller and DC-1 and update the connector in the controller. I would recommend the new battery if you are upgrading everything. ...
by cruzxia
Apr 10 2018 7:10am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Rix, good observation on the new motor. I rode one of the latest B52's and they were so impressive that I decided to upgrade my motor and battery. The new motor is just fantastic, it has way more torque at all speeds, weighs several pounds less that the old motor and is more efficient. The reduction...
by cruzxia
Apr 08 2018 2:15am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Image
B52 in paradise. :D
by cruzxia
Oct 21 2014 7:08am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Boars

If you can't decide go see the Brisbane dealer they have a Bomber and a Fighter you can test ride.
http://www.o3industries.com.au/stealth_range.html
That will make your decision much easier.
:D
by cruzxia
Oct 02 2014 7:45am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

There are 2 O-rings that seal the bush. Try replacing them top and bottom. They will prevent the shock rotating side to side as shown in your photos.

:)
by cruzxia
Jun 22 2014 6:42am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

cruzxia wrote:On the new Stealths, if the battery level is not at 100% after fully charging the battery.
Look in the settings menu , you can reset the battery level to 100%
Use Manual Reset ,and press OK.
:D
Ratle this should help.
by cruzxia
Jun 01 2014 3:08am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

On the new Stealths, if the battery level is not at 100% after fully charging the battery.
Look in the settings menu , you can reset the battery level to 100%
Use Manual Reset ,and press OK.
:D
by cruzxia
Jun 25 2013 3:29am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

cashmax It is a bit hard to tell from the video, check that the hall sensor connector is plugged in correctly, they are easy to disconnect, but harder to reconnect. You have to pull the lock ring back while pushing the connector forward. If it is connected correctly and it still wont run, you may ha...
by cruzxia
Jun 19 2013 7:03am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

send an order to bms for an 24cell LiFePo charger that charges 6A up to 86,5V (6A was an advice from another stealth owner to keep the stock battery "healthy" ) dh_paule For the stock Bomber battery the charge voltage is 87.6v (24 x 3.65v) Don't worry If you have already ordered the charger you can...
by cruzxia
May 23 2013 9:03am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

CD

Check out these
http://www.hobbyking.com/hobbyking/stor ... _Pack.html
If they fit it would make your wiring much simpler. You could use 4 packs to give 18s 1.16ah

Cruzxia
by cruzxia
May 22 2013 7:01am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Re bike security. I tend to lock the bomber through the back wheel using a Kryptonite hoop lock. The back wheel can be unbolted by an organised thief, but then he has a bike with no wheel/motor, and has to move the rest of the bike with no back wheel. Cutting off the seat mount, would be easy, and y...
by cruzxia
Mar 02 2013 7:51am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Snapperboy When the bike is new, the paint around the axle parts wares, and the nut comes loose. If the axle clamp is loose then the axle will move, loosening the axle nut. If the axle clamp is tight, it wont be the regen causing the issue. The axle clamp only prevents axle rotation, It dose not att...
by cruzxia
Feb 06 2013 7:03am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

I have a Oregon like the one in the photo. It is water proof. The speed and xyz g force is displayed when played back on a Tv If you use their pc program to view the footage, It will display your location on google maps as you ride, which is cool to see where you have been. The image is quite stable...
by cruzxia
Jan 14 2013 5:01pm
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Rix You could try pre warming the bike, if it is stored in a room at say 85f over night, then the battery will warm through. If you ride hard the current draw should keep it warm. Just don't stop for coffee along the way. If your battery wont discharge when cold, it wont charge either. Are you charg...
by cruzxia
Jan 04 2013 8:28pm
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Kepler With oil cooling the heat from the stater should be transferred via the oil to the outer casing more rapidly. So your motor should heat up faster from cold than it did with no oil. I would the expect it to run cooler internally, but the outer case should run hotter than it when it was just ai...
by cruzxia
Jan 04 2013 8:06pm
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

FYI - Bomber bearing sizes are:

Disk size Bearing = 6005
Chain side Bearing = 6004

:D
by cruzxia
Jan 01 2013 8:43am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Happy new year to everyone. Kepler keep us posted on the oiled up BPM. I am right with you, I like the motor, but the gear noise is irritating. I have a BPM II, but I haven't run it yet. They have the screw on motor cover that needs a special tool to open the motor. The machining looks more accurate...
by cruzxia
Nov 13 2012 4:16am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 681183

Re: Cycle Analyst V3 preview and first beta release

Justin Mode 1 & 2 issue resolved, I found the issue that was preventing the throttle opening in mode 1. For some reason the start speed in mode 1 had defaulted to 99kph. once I set it back to 0 mode 1 and 2 both worked perfectly. I did discover that with the throttle voltage limited, the speed was c...
by cruzxia
Nov 12 2012 5:01pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 681183

Re: Cycle Analyst V3 preview and first beta release

Speed limiting B20 Direct throttle mode. In B20 the speed limiting is still over shooting on initial throttle. I set 19 kph and it went to 30 kph before it limited. Once working it was very good, no surging, just nice and smooth. :D :arrow: I think the over shoot is caused by the throttle ramp down....
by cruzxia
Nov 09 2012 9:20pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 681183

Re: Cycle Analyst V3 preview and first beta release

Here is the throttle out images. You can see in mode 1 throttle out is limited to 0.80v
In Mode 2 it is normal set at 4.50v
135.jpg
This is mode 1
135.jpg (64.45 KiB) Viewed 4680 times
1352513753417.jpg
This is mode 2
1352513753417.jpg (60.56 KiB) Viewed 4680 times
by cruzxia
Nov 09 2012 7:25pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 681183

Re: Cycle Analyst V3 preview and first beta release

Justin 0-30 kph is 3.5 seconds, with it limited to 1800w It is setup to provide 2300w for the first 0.5-1 second of throttle. launching is hard as it wheel stands. B20 issues I setup Mode 1 & 2, First thing is that the throttle worked in mode 2, but was not transfered to mode 1, (I am back using dir...
by cruzxia
Oct 29 2012 10:38pm
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Kepler I have been testing the power settings with my BPM code 12, I have the CA set at 1800w (it is a V3 so you can set the Watts and amps) and the controller limited at 34A. I have set up the CA with a slight delay, so that it takes about 0.5-1s to react and limit the throttle. This gives full pow...
by cruzxia
Oct 29 2012 7:59am
Forum: E-Bike Build Threads / Photos & Video
Topic: E-S Stealth Electric Bike Owners
Replies: 16487
Views: 1580152

Re: E-S Stealth Electric Bike Owners

Check the shunt value is correct in the CA. If it is set wrong it will report the AH incorrectly. Battery is 18ah so 22ah should not be possible.