Search found 273 matches

by aCeMadMod
Apr 20 2019 2:11am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi after riding wet weather. Not the best for testing ebike. All I can say wow.. Once I up grade my spring. From 350 can get 700 pound. Bike done New 30 wight oil feel great. When done you hard to hear motor when rideing you look to see it moving .. Note To my self I use 1.1L of oil I do burn out of...
by aCeMadMod
Apr 19 2019 2:51am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I was. Work all day to test ride my ebike.. With no sparts. ItS rianing good. Not rideing . Walk of shame to costly I try oil mod no leak so far.. I use about 200ml if oil it was noT full . Inject it via bleed holes It sound very different.. Like 2/3 the speed It sounds slow 😎 it not... Only ...
by aCeMadMod
Apr 18 2019 3:35am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I got in short got the to run.. Not use halls No was i want I wanting.. Don't have big vesc yet So pull out 5 year old 6 FET 4110 Sensorless Mini Monster Controller LYEN Edition I badly to get a other ebike running. So I can fix my other cyclone ebike. I not pull it a part over 1.5years need ...
by aCeMadMod
Apr 14 2019 4:24pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi I don't know what you mean by the wrong way.? I don't have standed gearing . This sould make bike go faster. Trade off. If I am right not the best climber. Once I tested it. I can. Change back wheel to fix climbing speed. Change again gearing 13 t motor freewheel. And not a half link chain Should...
by aCeMadMod
Apr 14 2019 12:30am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I will tested the 3d printed sun gears. I made a other mod to setup. I have chian gluid for motor now less stress when ridding to think about The chain was OK. It new soon start adding power It a new game Thank great es for help. I think I end up use the same oil In Dave gearbox I will try to...
by aCeMadMod
Apr 13 2019 9:00am
Forum: E-Bike Technical
Topic: Tangent Gen 1.5 kit, Astro 3210: Usage advice please!
Replies: 7
Views: 202

Re: Tangent Gen 1.5 kit, Astro 3210: Usage advice please!

Good Luck getting any help from. Dave dose not seen to care about Es poeple any more You need nonstanded motor mount. Which he had half of one. For that frame zero The last time I got a reply . I was going to get that frame but found it to weak in how it flexs under power 3210 motor to small for a d...
by aCeMadMod
Apr 13 2019 3:44am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all great some one made sun gears for cyclone 3000/4000 motors Are you able to sell or share file? Or sell them if so what cost ? I was Look the them close At pics looks like You need a cisclip grove top and bottom. Or are you glue them in? I did notknow you could get 3d TORLON I find the baering...
by aCeMadMod
Apr 12 2019 8:50pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I been look at better gears. I found from past es posts . That people say to try use TORLON. I dont have tools to Cut it . I like try make some I can't do cnc . So Daves gearbox to hard to make gears. By hand I try for mini cyclone and 3000/4000 motors. Say cyclone OK motor it not a 3220 I ca...
by aCeMadMod
Apr 12 2019 7:14am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all has for oil seals. I never keep info about seals before install them . the bearingand seal shop for got some for me All I know is out one I. D seal is 20mm Output shalf The iner seal only 1 lip Just Rebmer I charge the bearing from 12 mm to 8mm hight only charged the out bearing To fit seal i...
by aCeMadMod
Apr 10 2019 8:11am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I fixed my motor mounts. Use hot glue to help For a test . I did not have My big vesc so I found a big hill. To ride down To my shock it pedals very well low speed. And hight speed I use n.o.s 3.0 tires. So this like a 29" wheels set. Once I got speed I was able ez add my own power in 6 gear....
by aCeMadMod
Apr 07 2019 9:18pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all I got my motor mount glue back.. I used Acrylic glue . I hope it hold . To give me time to work out how to make a other better this this time. Wood or I like clear plastic. And yes use I use 20mm Acrylic x2 Is 40mm. I look at 3d scanner then I would be able to 3dprint it? What the best for th...
by aCeMadMod
Apr 07 2019 3:33am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Bad news. I was adding fOr the last time more sealing for oil. When tight up bolts hard . My motor mount crack in a bad place . I need to redone again 😡 so much money This time I need bullet proof glass.. It looks OK nice before it cracked. I need try find 3d scanner. I was hoping to test soon. 😭 Th...
by aCeMadMod
Apr 02 2019 2:56am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Very close to be done .. Just need remote and big vesc and a bit cables to join it all up. Wax my chians. Change rollers like 3 times before it been used. Just try to find 25wight fork oil. Anti froam. Cyclone motor fit right now with oil seal just need a oil port and try find right oil or aft for g...
by aCeMadMod
Mar 28 2019 5:06am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all what a day.. Blow up power labs 6 changer Happy I stopped a lipo fire. If not looking. And vesc 4 stop working in the rain.. My next upgrade cables for big vesc EBikes are no fun when you have to push for kms Got a new part made off set joiner for mosters t 1998 crowns with 2003 monsters t cr...
by aCeMadMod
Mar 26 2019 4:30am
Forum: E-Bike Non-hub Motor Drives
Topic: GreenMachine allMod aftCycloneVz DaveRc Tangent astro 3220
Replies: 93
Views: 15197

Re: GreenMachine allMod aftCycloneVz DaveRc Tangent astro 3220

Hi all look like I have my ti bar for axle I guess take 2weeks to get axle and freewheel track holders done. Looks Like 3220 like pull 50 to 60amp with vesc 4 , With stand gearing Can't wait try big vesc what a safe amps for a 3220 in deta First time fear killing my motor. 300amp from a big vesc Tha...
by aCeMadMod
Mar 24 2019 2:40am
Forum: E-Bike Build Threads / Photos & Video
Topic: 72 vott e-bike
Replies: 49
Views: 8216

Re: 72 vott e-bike

You got super monsters. T forks
Can tell how much oil and what wight you used.. And band
You got a 800pound spring what size?

It been 10 year from last oil change

Thank you
by aCeMadMod
Mar 23 2019 5:13am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all Change a few things. New forks from monsters t forks to super monsters t. Look like it be a good padeling ebike New oil and seals I. E over 10years old.. Seals Mixed 1998 and 2003 fork crown. Don't know how it works.. It never meant to use this way. Add 15wight oil It a guess Need a new shock...
by aCeMadMod
Mar 21 2019 10:15pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all the rear hub is fixed.. No freewheel I have a working gearing I added rollers gluids I have no idea how it will pedal. 65t #25 chianring is like in size a32 t stranded chain ring My gearing Motor freewheel 14t 22t Stranded pitch 65t #25 driving ring Back wheel 81t 25# My gearbox https://m.you...
by aCeMadMod
Mar 21 2019 7:30am
Forum: E-Bike Technical
Topic: Overheating middrive motor?
Replies: 22
Views: 403

Re: Overheating middrive motor?

You killed your motor... It to late
I not not going into any more then you push to hard. No fan cooling Heat kill this motor...
Heat sink are useless

Copy me or other es poeple

They help me when I started

Save up for new motor.

Good luck
by aCeMadMod
Mar 21 2019 2:58am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Go all got alots done. I have runing gearing now. I had mistake my 😱 sockets 219# I was told it h25# from Mini bikes In any case the my big chianring 25# like the size of a 40teeth Stranded chain ring. My driver one it #25 65teeth. BIggers I can fit ... Size like a 32 t stranded chianring Motor will...
by aCeMadMod
Mar 20 2019 6:37pm
Forum: E-Bike Technical
Topic: Mid drive with GT i-Drive
Replies: 4
Views: 174

Re: Mid drive with GT i-Drive

I done it before..

With cyclone .
GT I not same Gti t1

Gt I frame no great they crack. At stock mount


Post your bike all the best
by aCeMadMod
Mar 19 2019 10:38pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all. Thanks give a head start for gearing



I got seals to make this cyclone motor oil filled..
I need broad out hole by 0.75 mm 2 mins work to add seal



Thank you all
by aCeMadMod
Mar 19 2019 4:19pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all it all left side.. Chain Mean I have real brakes. No oil to kill brake pads Has for math for 219# Gear ratio I have no idea I just try what I have. Right now back wheel is 81 teeth. I counted right. It could be too big. Has cyclone has a 1.6 gearbox. Big vesc only use 12s lipo If too slow I u...
by aCeMadMod
Mar 19 2019 3:57pm
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all yes I plan add the cyclone motor to the out put shaft of the gti gearbox . Just hope I don't get kill my outputshalf in Gti gearbox. From stress from motor It will 1 chain for both leg and motor http://teamtriforceuk.com/a200s-v2/ My big vesc https://cdn11.bigcommerce.com/s-4t55i5fv4j/images/...
by aCeMadMod
Mar 19 2019 5:50am
Forum: E-Bike Non-hub Motor Drives
Topic: cyclone fan MOD 3000watt mod and Gt it1 frame
Replies: 42
Views: 1732

Re: cyclone fan MOD 3000watt mod and Gt it1 frame

Hi all got a bit done today.. MOD the 219# chain ring to fit back wheel I had clean up my whole place to find 1 bolt. To give me room to bigger chianrings For chain glide I guess I fit 95 teeth ring now.. MOD the out put shalf . I got back 7.5mm its now shorter. I no Idear how my gearing will go 15k...