Endless Sphere

VasiliSk wrote: ↑

Jan 27 2019 5:48am

ElectricGod you've got beta boards of 6F x)

So the final 6F Controller will be coated with conformal too, right ?

When will you go into Display Mold production ?

greets
Notger

And now imagine you're going down a hill using your brakes all the time... Wtf?! What's happened with all the stats and settings? :) It for sure has to follow some kind o rythm or signals/per/seconds rule. exmpl. -> 5 fast break Singals within 2 seconds otherwise its ignored as setting-cange. AND/O...

Micro Nucular Controller 6F - at production 16S Micro Nucular BMS extreme small size for scooters - planned 24S Nucular BMS for any kind controller - planned Micro Nucular controller 6F + LCD price 240$ (includes shipping) (ETA Feb 2019) Nucular controller 12F + LCD price 350$ (includes shipping) (...

Im still not sure how i should implement this 'feature' in meaning of whole system, it's not just single controller. And also one needs press brake 5 times, other needs press brake and throttle, another enter password... What about a "reset button" which does something like following: If this butto...

Finally the Chinese Version of an Torcman T-Bone
http://www.t-bone.torcman.de/#xl_Torque

Any ideas of the Price yet ?
and when will it be released ?

greets
Gernot

Can you recommend a BMS for 10S and 60 maybe 90 Amps? As Examples http://www.chargery.com/BMS16.asp https://bmsbattery.com/bmspcm/833-smart-bms-10s13s-60a-with-blue-tooth-android-or-ios-app.html or from the E-skate community https://www.electric-skateboard.builders/t/diy-6s-to-12s-bms-with-can/2639...

Allex wrote: ↑

Aug 30 2018 12:28pm

The guts of the beast

What Beast is it ?
A new one or the MAX-e

Photos ??

If the torque sensor function sucks... I won't fight you, that's opinion. But to say it's not a torque sensor is going against the fact that it IS a torque sensor, is what I am trying to tell you gentleman. So it sound you have one of these motors ? What happens if you put the bike on a bike-stand,...

Question to stancecoke ?? Hey Stancecoke what do you think, i know that you did lots of "surgeries" on many different kind of torque sensors. Seeing the inside of the Linbei now, i do not understand how torque should be measured at this spot. I mean i could think of that a hall-sensor measures the ...

VasiliSk wrote: ↑

Aug 10 2018 6:14pm

Torque sensor still WIP.

What does that mean i tought the BBS does not even have a built in torque sensor ? it does ?

There are 63V rated caps inside so I would say no. I mean not taking Voltage spikes into count it should actually work 15X 4,1 Volt (ideal 18650 charge-limit) = 61,5 Volts But sure the Battery gauge will not show the right state of charge it the dispaly can just be set to 14s But ! would be importa...

Soem Phots please and more infos about potential damages ?
What kind of GNG kit ?, they built several ofter the last years

agniusm wrote: ↑

Jun 27 2018 10:49am

only allows to crank up to 67v.

How low could you set the output voltage minimum ? (with both mods pot and programmer ?)

greets
Notger

The BBS software doesnt seem to work with it, there are alot of differences... of course someone more savvy may be able to make it work, but I think a complete re-work of software would be in order, considering the torque sensing differences etc.. Did anyone actually try to connect the lingbei with...

Some users also want to try use with 15S battery pack and that would be 15% more torque and 15% more cadence. I think i remember reading about Bafang BBS Users trying to go with 15s Liion = fully charges 63 Volts. What i remember is that the Bafang configuration software would not allow anything ab...

I didn´t follow the topic about it so much, but did someone find a way to use a torque sensor for Adaptto instead of the classic old school PAS? I did,..... but there is no "plug and ride" solution Either you use a CA3 between BB-Torque Sensor and Adaptto-Throttle-In (witch would probably be the mo...

@tangentdave

a short "side-question" --> wahts teh overall width of the Drive (from outer motor-case-lid to the Freewheel ? )

Greets

Notger

You are looking for the one with PW protection for Normal and Boost mode, and in ECO only PAS schould work? Hi, looking for all Mini FW's actually (also to feels save if Adaptto would ever Quit their Business) - Password protected - Eco mode works only with PAS (with throttle disabled) --> to maybe...

There are two differnt firmwares. On one the Eco mode works only with PAS (with throttle disabled) and with the other both throttle and PAS works at the same time. Are those Firmwares availeable in teh most recent Version ? and where to get them From (in my case for my two Minis) thanks --> notger

That Bafang BB crank looks really promising with those input/output voltages. Since I have a Phaserunner that has programmable throttle levels I think I’m going to pick that up for my bike. It does, but not sure if its supported by the CA as pre-controller ? Probably it has its own "intelligence" i...

Does anyone know this multi-tooth standard that Bafang is using on its chainring-spiders ? (if it is any standard)

I'd make an adapter with BSA threads, the adapter would attach to the torque sensing BB using the splined/bolted interface. All the hardware for flanged freewheels could then be re-used. Chainline may be skewed outboard but a custom offset spider is easy. -dave exactly my idea, just not sure, if th...

And now, ontop of that, another Motivation would be to create a custom mi-drive-freewheel-bb-torque-sensor for my several mid-drive options with freewheels. This could look like this.: https://static1.squarespace.com/static/552159f1e4b09b57601a38bc/t/5adb9a1c03ce64f4b44a4c35/1524341862620/FW+spacer....

Hi, I'd like to make people aware of two new BB - torque Senors witch look really interesting. One is the "New Generation Sempu T4" measuring torque on both sides cause measuring the chainring-force. https://ae01.alicdn.com/kf/HTB1wL8FexGYBuNjy0Fnq6x5lpXaG.jpg ---------- https://www.ebikes.ca/docume...