Endless Sphere

I want every detail of your settings you used for your setup especially because you have a 10S4P pack capable of 60 amps. Judging by your response it looks to me you are somewhat knowledgeable on the FOCBOX's operation, but not enough to know the downside of surpassing those limits if you manage to ...

I'll have to post this notice since it seems to be only mentioned on esk8.builders site. Ollin has stated he will no longer be producing components for the DIY market and moving towards completes. So it's bye-bye all the high quality VESCs from him.

Link to li-ion cell data

http://lygte-info.dk/review/batteries20 ... arator.php

It's off topic commentary I am going to type out. After electric-skateboard.builders site was made, all the "big players" in the custom board went from this forum to there. I stop by this forum because it has some good ideas. If anything we all advocate for the use of a VESC speed controller except ...

The new VESC tool has been released on http://www.vesc-project.com/.
Here's the discussion going on at http://www.electric-skateboard.builders ... d/32268/81

Edit: There's still some issue regarding the use of the tool with hardware version 4.12

Hi, Back to technical Questions - Does the VESC6 have a onboard antispark-protection (if so does it have remote on/off pins ?) - how many Farad do the capacitators have ? and now some other Questions again: - when/will? the new bldc-tool software be free for downloading, will it be compatible to th...

silviasol wrote:$300! Where are the gerber files and bom? I can make my own.

Nothing is release yet for VESC 6.0. A lot of drama went down about how Trampa has first grabs, but most of it was Vedder's decision. So yeah, the Beta phase is over and we're all just waiting for the release.

From all the stuff I read regarding the positive comments and negative comments. Enertion gets 2/5 stars for spotty customer service. I have not bought anything from them. I actually use a 4-star scale when reviewing stuff. The fifth star is the unexpected category from me.

I like what you did with VESC controller. What are your comments on switching from a 7-pin MOSFET to the 3-pin MOSFET, any pros and cons with the design decision you made over two VESC on one PCB? I can understand that your orientation of the MOSFET allows for better cooling. Just so you know, VESC ...

Generally, Superglue is known as CA glue for hobbyist.

I would not advise JB weld. People suggest it but no one mentions it has iron filing in it. It may not help with the performance of the magnets if you were to reattach them with it.

Taken from Vedder's forum I understand that waiting is frustrating, but I'm really trying my best with everything. Currently I'm also working on a website dedicated for the VESC project where I'm putting all the information about the plans of the project: http://vesc-project.com/ If you don't log in...

Yes, it is a form of drag.

To be honest. You will have to find someone who can make you the hangers. At a minimum width, the hangers without the axles, have to be 11 inches to ensure space for two 6374s on one hanger. I'm not trying to take over OP's post, but to show as an example it can be done. I show my custom milled 10-i...

After a long time of literally doing nothing and waiting for stuff to get better. I have completed my build with some experimental modifications to arrive at a level I can say I am done. The Speed Bomber has become the Golden Rider. Post on Imgur to ensure database longevity since I have visited for...

Obviously, this is out of the main topic, but how did you make your forge? I've been trying to figure out whether to go with bricks, insulating wool, or castable refractory and the only place I can get this stuff is Harbison Walker.

Are the gerber files and stuff out yet for the vesc 6 or is he still working on it? Not yet, there's an ETA Vedder will make it available during Q1 2017. Considering the first time the VESC was shown before released in a format for this community to use, I give about the last two weeks of February ...

Not for li-ion batteries where high current draw, but definitely for low current draw like portable battery banks I suppose.

I read a post somewhere here they are in the process of moving to a bigger warehouse, spot, or something with more room. Hence little response from them.

Taken from electric-skateboard.builders/t/vedders-vesc-6-0/3813/134 1iwN5LGGM80 From user JTAG on electric-skateboard builders, "Qoute from the VESC godfather himself: "Hopefully everything will be ready in the first quarter of 2017, including reliable and well-tested hardware. I will try to arrange...

By general consensus per CC licence guidelines. Stuff can be shared as long no one is making money off of it. Enforcement of those rules is binding in the "community" sense in hopes of disseminating knowledge to the mass, but frowned upon if you copy stuff without citation of source. It's not really...

That ... and probably something will flop when they try to sell it for cars and real applications... unless they publish a demo and some graphs... I came upon information about the stuff SolidEnergy Systems may probably using in the li-ion cells they are about to make. Link to patent, I think this ...

ely wrote:does any one knows if the elecric boards needs any quality control certificate like UL or ETL ?

Only if its a product being mass markted. Customs are up to the make to ensure it is save to run in all intended environments.

I will chime in to give you a perspective hoping you can think creatively to apply the knowledge given here by others with experience. I will try to keep it short. My story. I have been building my 2nd eboard for 4 years. Those are 4 years and counting of learning how to make a board that will last ...

Hi all.

I just want to get this thread rolling for graphical purposes. I wish to ask everyone here to provide the total weight of your set up and battery configuration.