Endless Sphere

Looking for a light and a dc-dc converter. Are these still available?

Looking for 1 or 2 of these:



Vendor is out of stock at this time.

Thanks

Must of got the last one from Amazon, already in transit.

https://www.amazon.com/Swagtron-Portabl ... B079PK7RRG

Decided to go with this one:

Swagtron Swagger 5 Portable and Foldable Electric Scooter (Version 2)

https://swagtron.com/electric-scooter-s ... gI5XfD_BwE

Looking for a Xiaomi Mi M365 Electric Scooter, whole or parts. Running or not is fine. Locater in US, TX. Thanks

-Paul

Price drop.

All items SOLD. Thanks ES! 2 6 FET IRFB4110 Sensored Infineon Controllers -- SOLD -- 1 6 FET IRFB3077 Sensored Infineon Controller: Fully Programmable For Motors With Hall Sensors $40.00 https://em3ev.com/shop/6-fet-irfb3077-infineon-controller/ All pulled from working ebikes running on 14S. Connect...

I ordered a 12F 4kW eBike Sinewave/Silent Controller back on August 25th (16 days ago) and still have not received it.

What is going on?

Thanks.

Update: Just got updated tracking info. Looks like it is finally on its way.

Looking for one of these in the USA:

Adaptto M14-7 Panel Mount 7 pin connector

https://www.ebay.com/p/Uxcell-M14-7-7-P ... 1338374376

Would like to get it with in a few days if possible.

Thanks

Looking for an Adaptto Mini or Midi. Would like to get it asap, shipping from US only. I am located in Texas. Prefer a Mini, but a Midi will work. Do not need the charge coil or the bms.

Thanks

Paul

Running a Mini on a Qulbix, 20s12p. Has run perfect for 2500 miles over the last 12 monthes. Today, turned the key on, and when I start to twist the throttle, it says 'Protect". Motor will not run at all. Tried a new throttle with the same results. Tried connecting the charger. When it starts charg...

In other news.. I got my order from Digikey today :D IMG_2028.JPG IMG_2029.JPG IMG_2031.JPG IMG_2032.JPG IMG_2033.JPG Have to do some more research regarding matching mosfets, so I can select the 3 that are closest to one another. Then I'll start the process of taking the 3 bad ones out. Did you ev...

Running a Mini on a Qulbix, 20s12p. Has run perfect for 2500 miles over the last 12 monthes. Today, turned the key on, and when I start to twist the throttle, it says 'Protect". Motor will not run at all. Tried a new throttle with the same results. Tried connecting the charger. When it starts chargi...

Delete

Recently finished a 20S12P battery using the 6pence welder. The welder worked very well, although it took a few attempts to get the pulse timing right. I think timing has a lot to do with the size and capacity 12 volt battery, using a very large deep cycle marine battery for this build. The nickel ...

Went to his facebook page, but could not figure out how to get to the thread you referenced, is there a link to it? Thanks. Looking for a 30A Adaptto Charging Coil. Prefer that it be located in the USA to save on shipping. Thanks chek the last thread of David Jehlicka‎ à Endless Sphere Facebook :win...

Guess I need a facebook acct. to do that!

Thanks Doc.

Looking for a 30A Adaptto Charging Coil. Prefer that it be located in the USA to save on shipping.

Thanks

you have to carry the coil also with you. not worth the weight and i dont think its an good idea for a psu "riding offroad" with it. Good points to consider. Most of my riding is on roads and bike paths, and not much off road riding, so if I do decide to carry the PS on the bike , maybe it will hol...

Looking for an ELTEK 1.8kW flatpack S.

Looking for a power supply to charge a pack through the Adaptto controller. Is there any advantage to using one power supply over another? Example: Power supply #1. 48 volts at 10.42 amps = 500 watts or Power supply #2. 60 volts at 8.33 amps = 500 watts. Just wondering which one would charge the pa...

Anyone find a source for the ELTEK 1.8kW flatpack S ? Searched around and came up empty. Looking to mount one on the bike, and this one is about the only one that will fit.
Thanks.

Looking for a power supply to charge a pack through the Adaptto controller. Is there any advantage to using one power supply over another? Example: Power supply #1. 48 volts at 10.42 amps = 500 watts or Power supply #2. 60 volts at 8.33 amps = 500 watts. Just wondering which one would charge the pac...

Anybody using fenders on the Q76R? I get the classic line of mud and water marks on my back when riding when it is wet.
Have not found anything specific for this frame.

I ordered about 450 cells. By the time they got here, both boxes looked like bags (had to ship in two boxes due to the number of cells). One "box-turned-bag" ripped open and about 20 of the 450 cells were missing. Not enough to go through the brain damage of filing a claim with the shipping company...