Endless Sphere

Havent ridden in ages.. Might be the magnets in the motor.. it would rock if you had a second esc and motor to verify if the problem is the esc or motor.. If i had to guess (which i do..) Sound like you smacked (if there is a dent on the motor) or spun it out (if there i no dent) the magnet out of a...

probably would fail doping tests as well..lol

http://endless-sphere.com/forums/viewto ... &start=100

62 kph on 12s

@Beto_py or anyone else do you have/know where I can get a model for a 36t 15mm pulley that fits the 83 clones? Beto I know you said you use a 15mm setup unlike most of the people who are using 9mm setups. I am going to investment cast it for a class project (class credit for making my e-board that...

awesome..lol
had no idea...
thanks for the info..

me 3..
however if the urethane is of a very high hardness it might last a while, although it might affect ride comfort, and lateral grip quite a bit...

regarding the brake... check the manual... the 80 amp version of this esc included brake but it was a typo... hope yours isnt

weird esc.. in my (brief and crappy) experience with boat esc this was not an issue... I have used the cheap little bird airplane esc (which I burned but thet is another story) the original bulletproof hv airplane esc and the 2nd version and they have all loved the quanum... an airplane joystick con...

Hi.. Dont think you can just go halfway for the setup sequency.... you need the full travel... Try reversing your throttle direction...(little button just above where the trigger would be) as some remote controls are inverted amd maybe your esc is looking for this.. If you are looking to diminish yo...

have had awesome experience... cheap fast and generally fine quality... I dont think ive ever recived someting i just too disapointed with... a couple mistaken things in part due to their lack of docuemntation ..but mostly my fault.. Their shipping times from interantional warehouse are on par with ...

Outgrown wrote: Is there a tutorial for this purpose?

Yup.... you get to write it...

Hills eat pulleys like a mother-fragger... Had to change a pulley after only 150 kms of hills.. found this bridge with about 500 meters of downhill... i ride down and quickly get to max speedcoast for a bit...slide my board (coleman basically)... ride up...Repeat... Damn bridge Ate my pulley.... so ...

just switch between ScreenHunter_227 Apr. 08 16.46.jpg http://www.hobbyking.com/hobbyking/store/__10264__XT60_Harness_for_2_Packs_in_Series_1pc_.html and this ScreenHunter_226 Apr. 08 16.46.jpg http://www.hobbyking.com/hobbyking/store/__10265__XT60_Harness_for_2_Packs_in_Parallel_1pc_.html however.....

There is always a new post regarding a new open sourced controller.. or a new gadget controller.. or the desire for a new controller design... So I`m baffled why im so in love with my wiiceiver... So I have acording to map my ride almost 1500 kms with the wiiciever on the velociraptor... and I love ...

5 mph... you mean our boards can go under 40...
I knew not pulling so hard on the trigger was bound to have some sort of effect...just never tried it...LOL

I can live unsensored, but if it ends up not costing much, and the space they demand is not huge... cant see any problems with it...

using a 240kv tacon...I ride my destroyer on 14:68 gearing on 12s... the torque is awesome and those 7 inchers roll over everything...

yup.. lots of configuring to be done..to save 10 bucks... if you add in the aluminum welding to the trucks (cant see how you can screw mount them) it might actually cost you more that purpose made ones..

Im 43 and do 64 kph on the destroyer...
ride 80 kms any average week before going to work...


You are still a yung pup...

Id eboard everywere during our dry season if our sidewalks were not so crappy... well actually not all of them are crappy,,, most dont exist...

upgraded to a closed helmet after a particularly hard fall... ScreenHunter_214 Mar. 22 11.33.jpg never going back to open face again if i can help it, Saw a gorgeous girl with road rash on her cheek, both elbows, hand and a knee just this morning on the sunday bike path... rollerblading in just shor...

torqueboards wrote:

sami wrote:i dont think its like that. i believe he is fulfilling the orders but not taking more that is all. i wouldnt make assumptions without knowing the full story mate.

I agree

agree

Massive battery would be minimum a 10ah 12s that can be connected as 6s 20mah just by swapping the xt60 series connector for one in parallel allowing the use of the 6s series escs as well as the Vesc or 12s Favorite... would need a bms installed as well as single port charging.. Also 18650 seem as e...

Battery switching is my only request.. I want to be able to ride 3 hours on sunday, and not have to lug my 4 boards along... not too flexy....wiimote capable...Vesc capable...10s 10ah batts... Choose my own trucks... 98mm abec capable... hubbed motor/geared motor capable... Carbon fiber Matte Black...

just pm'ed him seeif he can come and share the knowledge

cool I'll contact him...
I dont mind spendinb $200 in batteries if it saves me $1000 in having 2 additional boards,,,,

So Im working on a proyect that has nothing to do with eboards and I stumble upon a vaporizer or vapping batteries These are 25-45c discharge batteries from anywhere from 1800 to 4500 mah capacity. Several brands http://www.ebay.com/itm/4x-Purple-EFEST-IMR-18650-HIGH-DRAIN-35A-RECHARGEABLE-Li-MN-Bat...