Search found 106 matches

by douglashart
Jun 17 2020 9:19am
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

Thnx Merlin,
I can always turn it down. Had a midi before , and it was almost eough
by douglashart
Jun 17 2020 9:18am
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

Thnx Merlin,
I can always turn it down. Had a midi before , and it was almost eough
by douglashart
Jun 16 2020 4:23pm
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

Thanx fo that maitalupus! I was definately wondering about that. I dont mind the overkill with the 24f. It is possible to adjust the power down to some useable wattage ? I like entertain the thought that the 24 might never get warm even when pushed . At work they call me dougy overkill Thanks doug
by douglashart
Jun 16 2020 4:09pm
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

LMX Nuculars I purchased a 12f when they came out, they were still the 200amp versions. that as been used in an LMX2.3 frame converted to trials. The Red trials uses the 12f , it makes 50kmh but climbs walls from a stop : rear sprocket 115 / front 12, you dont want more power than this trust me wil...
by douglashart
Jun 11 2020 10:59am
Forum: Items for Sale - New
Topic: ASI BAC Controllers Europe Vendor
Replies: 71
Views: 4584

Re: ASI BAC Controllers Europe Vendor

Hi Martin,
I know what phase wires are and hall sensors I even know how to hook up a temp sensor!
Now that you know everything I do about controllers, do you think its possible that I could dial in this controller to peak efficiency? Thanks doug
by douglashart
Jun 11 2020 10:59am
Forum: Items for Sale - New
Topic: ASI BAC Controllers Europe Vendor
Replies: 71
Views: 4584

Re: ASI BAC Controllers Europe Vendor

Hi Martin,
I know what phase wires are and hall sensors I even know how to hook up a temp sensor!
Now that you know everything I do about controllers, do you think its possible that I could dial in this controller to peak efficiency? Thanks doug
by douglashart
Jun 09 2020 3:40am
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

Thanks guys I can use the encouragement. This controller thing can be mind numbing
I'm putting together a Q76 with a swingarm drive using a Lightning Rods IPM motor
and now I'll try to configure a controller.Got a 24 ordered
.
by douglashart
Jun 07 2020 12:27am
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

I know nothing, What is an optical isolated pmw driver? DC to DC? Amps? Pic ? Thanks , I've been waiting on an ASI , but im thinking this unit is Cadillac in comparison, so now I'll be waiting for one of these. I need to ask a shitload of silly questions in the next few days, should I communicate on...
by douglashart
May 31 2020 6:33pm
Forum: Items for Sale - New
Topic: Qulbix Q76R Frame Kits & Complete Bikes PRE-ORDER
Replies: 841
Views: 119762

Re: Qulbix Q76R Frame Kits & Complete Bikes PRE-ORDER

Hi All, I just read thru this thread and want to thank you for good input. The main thing I was looking for is info about a fuse or breaker on the battery, but I didn't see much. Are people , not , using breakers? I dont see much accommodations on this frame(76r) for the such. If anyone has any inpu...
by douglashart
Dec 30 2018 2:00am
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1414
Views: 147415

Re: Nucular electronics - complete kit for ev! [beta]

Desc: Shows charge, speed, power, currents, cell voltages and etc. -------------------------------------------------------------------------- As I understand , you haven't developed a BMS yet but , does this mean(above) the display will actually moniter individual cell voltages? Has leads cable? I h...
by douglashart
Nov 15 2018 3:47pm
Forum: E-Bike General Discussion
Topic: Qulbix Q140MD - any experience?
Replies: 193
Views: 18425

Re: Qulbix Q140MD - any experience?

Since its all that's available nowdays, Im hoping to use a conventional 150 or 155 mtb THRU HUB. Does anyone know how or if a thru hub can be used in the qulbix? BTW itll be middrive
by douglashart
Oct 02 2018 2:57am
Forum: E-Bike Non-hub Motor Drives
Topic: The BEST and FIRST Qulbix Raptor mid-drive build!
Replies: 408
Views: 57550

Re: The BEST and FIRST Qulbix Raptor mid-drive build!

Hi Mike , Back here again. I couldn't drag notes on facebook so.... Thanks for reply, I might not understand what you told me: With at least 3000 watts on tap pedaling is just for exercise. I want to travel, so I looking to miser some watts This is what I don't understand: If you want a cassette the...
by douglashart
Sep 24 2018 11:27pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

I wonder why you like to use the Neumotor if you probably could fit the QS2000W or an LMX midmotor below the swingarm. Thnx for the help madin .Im sure your right about the mass, but just the size of the neu , gives that much more space for a reduction shaft. more reduction = less stress on the mot...
by douglashart
Sep 20 2018 6:17pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

yes! the Sur-ron setup could well work under the qublix (esp with the neumotor) but im afraid it will only work with the 8038. Even at that, i think it could work. If your pulling 10kw from the 8057, would i be correct in thinking the 8038 good for 6 kw - 3kw continuous?
by douglashart
Sep 20 2018 2:41pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

Havent bought anything yet but ill be using the r76 Qublix. SO , ive only pictures to design off of. After seeing this i will soon do improvements on the rotor by installing stronger, segmented magnets and rewind it to 4T (~60kV) or 5T (~50kV) YY. I think 50 kv @ 7 to 1 reduction would come close to...
by douglashart
Sep 19 2018 9:01pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

As previously mentioned i will soon do improvements on the rotor by installing stronger, segmented magnets and rewind it to 4T (~60kV) or 5T (~50kV) YY.
I missed this! Incredible! Ill definitely be here ! :D
by douglashart
Sep 19 2018 7:29pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

3) see above, but i wonder why you would like to mount two motors beside the shock? When looking at the qulbix frames i would put one motor underneath the swingarm. Just doing a lot of pondering before I go crazy and pull the trigger on a project that is probably over my head. I was thinking 2 of t...
by douglashart
Sep 19 2018 1:43am
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

I just answered my own Q? duh Im total newb all over. I see now what is meant by 'outrunner' !
by douglashart
Sep 18 2018 4:36pm
Forum: Motor Technology
Topic: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+
Replies: 173
Views: 35023

Re: Neumotor 8057/75 middrive project, belt drive, adding halls, 10kW+

Hi madin, I could've PMed you but, since I just got here ,I wanted pump the thread for MORE. How about that video you promised? :D . Congrats on ANOTHER incedible build.!Questions:(1) Tell me , is the rotor keyed to the shaft or ??? (2) Would you consider printing out and wiring up that halls fixtur...
by douglashart
Aug 24 2018 2:46am
Forum: E-Bike Non-hub Motor Drives
Topic: The BEST and FIRST Qulbix Raptor mid-drive build!
Replies: 408
Views: 57550

Re: The BEST and FIRST Qulbix Raptor mid-drive build!

Hi Mike, Are you still around and building? These threads seem quiet. Im curious about the Q76 swingarm drive. A while back, you mentioned that it could be set up with the small block , allowing room for a derailler. Is it still possible? Can a freewheel cluster screw onto your hub? And (for now) Wh...
by douglashart
Nov 22 2017 2:29pm
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5162
Views: 611607

Re: Adaptto Mini-E/Max-E Owner's Thread

Just got my mini back from Russia. I ran auto detect a few times but it didn't seem close to right, ie- anglecorr +28 +18 +16. Top speed after, varied 25 to 35 mph. I ended up putting it to boost, went to angle corr. and adjusted it while WOT . I found that at -.78 the motor ran up to 52 mph and any...
by douglashart
Sep 08 2017 11:34pm
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5162
Views: 611607

Re: Adaptto Mini-E/Max-E Owner's Thread

lol , sorry Not, no conversations , just about the fix
by douglashart
Sep 08 2017 7:17pm
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5162
Views: 611607

Re: Adaptto Mini-E/Max-E Owner's Thread

They are still in Russia and still in business. Sent my mini to em around the 1st of august and they've fixed it , now I'm only waiting on the mail. I'm thinking that they've been overwhelmed by a lot of BS from a lot of people and minimized their communications force. I look forward to the new gene...
by douglashart
Jul 05 2017 12:23pm
Forum: Items for Sale - New
Topic: Advanced ADAPTTO controllers and compatible products
Replies: 1595
Views: 252878

Re: Advanced ADAPTTO controllers and compatible products

My mini display wont come on. I had it running on the stand, charged , autodetect all good. took a break , when I came back , the display wouldn't come on. I did hook up an adjustable brake for a minute but wasn't sure of my wiring so disconnected that, and ran it some more after that. Ive tried con...
by douglashart
Jul 05 2017 12:04pm
Forum: E-Bike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5162
Views: 611607

Re: Adaptto Mini-E/Max-E Owner's Thread

My Mini display wont come on. I had it up and running. Charged , AutoDetect, then ran it a bit on the stand. took a break , came back and the display was not there. I did hook up a brake throttle but wasn't sure about my connection so unhooked it , but then it ran some more before shutting it off th...