Search found 5566 matches

by markz
Jan 19 2019 11:10pm
Forum: E-Bike Technical
Topic: $14.99 72v Sunwin Controller
Replies: 464
Views: 41178

Re: $14.99 72v Sunwin Controller

Did some searching and said f-it, taking a shunt off the first one I have been using for years now, and going to place it on the 48V 1500W 45A. A) I am thinking I should straighten it out and place it on the backside? B) Leave it as it is, but not sink it too deep into the solder on the backside. I ...
by markz
Jan 19 2019 5:46pm
Forum: E-Bike Technical
Topic: $14.99 72v Sunwin Controller
Replies: 464
Views: 41178

Re: $14.99 72v Sunwin Controller

This is a good reminder, I will activate mine on the 45A which is the highest for hksunwin in stock form. There is probably nothing to program on these boards as the LVC is just the resistor newtork and the current would be the shunts. These boards probably have multiple options for different chips ...
by markz
Jan 19 2019 5:30pm
Forum: E-Bike Technical
Topic: $14.99 72v Sunwin Controller
Replies: 464
Views: 41178

Re: $14.99 72v Sunwin Controller

I am taking apart mine now, I noticed a missing fet screw, had to cut the end plate off, the cap I wired in still working good. Only issue is I ripped out the self learn white wire from the pcb. I just realized the controller I've been using all this time is the 60V 800W 30A model, no modifications....
by markz
Jan 19 2019 4:27pm
Forum: E-Bike Technical
Topic: $14.99 72v Sunwin Controller
Replies: 464
Views: 41178

Re: $14.99 72v Sunwin Controller

eee291 states shunt mod 3kw bursts Ianhill states 58A on High, some soldered shunt for 100A his a little mod for 65A 4.4kw This is an interesting post. 2nd # is current limit. Makes sense, I have 3 or 4, picked one Im eyeballing for shunt mod, 2nd number is 45. It states 1500W, 48V (meaningless beca...
by markz
Jan 19 2019 4:21pm
Forum: E-Bike Technical
Topic: $14.99 72v Sunwin Controller
Replies: 464
Views: 41178

Re: $14.99 72v Sunwin Controller

Quick question
What kind of power have people been getting with added bus bars and current shunt mod?
Compared to stock form?
by markz
Jan 19 2019 4:15pm
Forum: E-Bike General Discussion
Topic: Winterized
Replies: 77
Views: 10532

Re: Winterized

I've considered warming up gloves etc, but think 12V waterproof 3528 led strips would be my preference. Very soft and flexible when warm, plenty of cheap "dimmers" to regulate warmth, and can turn inside out for putting on a show. How hot would led strips get? Coldest days here were last night, its...
by markz
Jan 19 2019 4:06pm
Forum: E-Bike General Discussion
Topic: longer range (over 100 yards) wireless vibration alarm?
Replies: 8
Views: 223

Re: longer range (over 100 yards) wireless vibration alarm?

This is what I'd do for that ebike. Buy the shittiest looking frame that you make so that it operates smoothly and has no logo's on any kind on the bike and the components. Scratch them off! Dont paint it shitty, buy a steel bicycle that is rusted! Do not use disc brakes, use V-brakes. Have a functi...
by markz
Jan 18 2019 8:46pm
Forum: E-Bike General Discussion
Topic: Winterized
Replies: 77
Views: 10532

Re: Winterized

I just purchased some NiChrome wire to sew into my gloves, scarf and pants. Not sure what a good wattage rating is, but I'd only use it for -5C and colder. I was thinking of using a High/Medium/Low using a SP4T which includes on/off and fused on + side. Basically a 10' wire, is tapped to obtain 25W ...
by markz
Jan 18 2019 8:36pm
Forum: E-Bike General Discussion
Topic: Is pedaless ebikes illegal in NYC?
Replies: 6
Views: 221

Re: Is pedaless ebikes illegal in NYC?

I thought it was only delivery people that were not allowed to operate ebikes.
I watched a youtube video on a typical ride in NYC and they had blue CitiBank ebikes for rent at docking stations.
by markz
Jan 18 2019 8:29pm
Forum: E-Vehicles General Discussion
Topic: ebike question
Replies: 2
Views: 96

Re: ebike question

https://www.ebikes.ca/learn/power-ratings.html Basically there is no standard for power ratings for motors, so its a nothing point. If you want the random number law makers put in place for Canada it is 750W, however authority are pretty slack. My motor is 3kw and I have been stopped once for no lig...
by markz
Jan 16 2019 2:32pm
Forum: E-Bike Technical
Topic: Replacement Hall sensors in BLDC hub motors
Replies: 14
Views: 1523

Re: Replacement Hall sensors in BLDC hub motors

This post comes up a lot when searching for hall sensors. So bump this up to the top for shitsngiggles. Question is, how much out of spec is doable when it comes to Hall Sensors? I try to get as close as I can to the SS41, so even though the first one, on the left is cheapest, I dont think it would ...
by markz
Jan 15 2019 9:29pm
Forum: Battery Technology
Topic: Cheapest Active Cell Balancer Project
Replies: 23
Views: 2525

Re: Cheapest Active Cell Balancer Project

For a 10S5P at a cost of say $3 which is the cost of the MPZ307 alone its going to be $150, judging from Digikey.CA's website, more like $5 for each balancer. Easier for me to just buy a BMS from Besttech. It is a very interesting circuit you made there and I am quite impressed by it actually.
by markz
Jan 15 2019 8:11pm
Forum: E-Bike General Discussion
Topic: Soldering novice: charger wire to BMS board
Replies: 8
Views: 136

Re: Soldering novice: charger wire to BMS board

Maybe you have a 25W iron and you need a 60W iron. Once the iron is up to temp, any solder should change color and flow easily enough. If the hole in the pcb is not melting by sticking the hot irons tip in it then I am not sure what else there is to do without pictures I guess. What I'd do is get a ...
by markz
Jan 15 2019 2:19pm
Forum: E-Bike General Discussion
Topic: Another bicycle rim almost toast
Replies: 1
Views: 170

Re: Another bicycle rim almost toast

I measured 13 to 14mm overhang of the 26" rim to the Shinko tire for the 16 x 1.60 (uninflated tire) Height of a 26" mtb tire I will have to google and find that out. edit - ok well I couldnt find nothing right off the bat, but I'd say about an inch, so doubled is 2" ok so 13mm is 0.5" times two is ...
by markz
Jan 14 2019 9:02pm
Forum: E-Bike General Discussion
Topic: Another bicycle rim almost toast
Replies: 1
Views: 170

Another bicycle rim almost toast

Noticed today while guerilla charging a spoke busted the the Crystalyte rim (a tad towards the hub) I got two used motorcycle rims in front of me 16 x 1.60 steel - I have a tube and Shinko tire for it. 18 x 1.85 alum - Ordered spokes from Greentime so perhaps a month wait. Local spot can cut and rol...
by markz
Jan 13 2019 11:16pm
Forum: Battery Technology
Topic: Cheapest Active Cell Balancer Project
Replies: 23
Views: 2525

Re: Cheapest Active Cell Balancer Project

I dig it, it is so easy to solder up I think I may try it on my old old old battery, gosh its got 1000 cycles on it by now because some days I'd charge 3 times. One main question I have is Is it safe? Can it be made safer? I dont mind spending a bit extra for fuses or diodes or whatever else. What I...
by markz
Jan 13 2019 11:10pm
Forum: Battery Technology
Topic: List of trusted and reliable battery suppliers
Replies: 28
Views: 2554

Re: List of trusted and reliable battery suppliers

www.ebikes.ca Grin Tech out of Vancouver Canada Also a list of websites - https://www.ebikes.ca/dealers.html which some may sell batteries or may not. www.em3ev.com American living in China Unit Pack Power http://www.osnpower.com/ https://lunacycle.com California ru.nkon.nl out of the netherlands BM...
by markz
Jan 13 2019 11:00pm
Forum: Polls & Surveys
Topic: When Windows 7 is dead in 2020 what OS will you migrate to??
Replies: 34
Views: 1164

Re: When Windows 7 is dead in 2020 what OS will you migrate to??

Not sure what I will use is a years time, I have played around with a few Ubuntu Linux programs. I am paying more attention to what I use the PC for. #1 is Internet #2 is OpenOffice #3 is Games on Steam - With that I will need to use a Virtual Machine, so I would probably do W10 and not activate it,...
by markz
Jan 13 2019 10:51pm
Forum: E-Vehicles General Discussion
Topic: Cleaning up an old Aluminum motorcycle rim
Replies: 9
Views: 190

Re: Cleaning up an old Aluminum motorcycle rim

I've never really like them dremel tools. Actual Dremel tools are pretty good (at least the original, like my decades-old unit). Crappy clones are...crappy. ;) I use one to trim my right big toenail which is too thick and curved to get any clipper on. :lol: Others use it for the callus on the heels...
by markz
Jan 13 2019 10:47pm
Forum: E-Bike General Discussion
Topic: Rim brake pads after ebike conversion
Replies: 9
Views: 327

Re: Rim brake pads after ebike conversion

Kool stop's the shit! i used to use their longer salmon pads i think. Those things stopped my +80lbs heavier ass doing 35mph very well. Kool stop.. for when you want the rim to fail before the brake pad :mrgreen: Yeah I know, I keep hearing that. Never purchased any myself, Chain Reaction Cycle doe...
by markz
Jan 13 2019 10:46pm
Forum: E-Bike General Discussion
Topic: Statorade vs generic Ferrofluid?
Replies: 6
Views: 232

Re: Statorade vs generic Ferrofluid?

You can only buy that Ferrotec APG1110 in mass quantities is my guess. Just buy from Grintech at www.ebikes.ca so you know its the real deal, been tested and wont harm your motor.
by markz
Jan 13 2019 10:44pm
Forum: E-Bike General Discussion
Topic: First attempt
Replies: 2
Views: 140

Re: First attempt

Thats exactly what it was, he didnt hop on, probably just took it by the handlebars, luckily he never frocked up my spokes. Its nice to have shitty ass looking bicycles, but with hubs they stick out more. Would love to have some Loops welded onto the hub and balanced. I am going to be on the hunt fo...
by markz
Jan 12 2019 9:41pm
Forum: Motor Technology
Topic: MXUS coming out with a 5K-Turbo motor, 55mm Magnets
Replies: 221
Views: 28613

Re: MXUS coming out with a 5K-Turbo motor, 55mm Magnets

The only generic mxus motors I see is that seller that uses the C&D graphic and mxus label. Never really paid attention to their prices, compared to mxus themselves. Thats where I bought my 3kw v2. Time to buy some samples.
by markz
Jan 12 2019 9:34pm
Forum: E-Bike General Discussion
Topic: First attempt
Replies: 2
Views: 140

First attempt

Sketchy fucker asked for 50 cents while looking at the telephone for the time. I was locking the back wheel and charging up. He went in to take a long ass dump or shoot up. I was inside when he walked out, so I followed seconds later, delivery guy said he tried to take it. He was gone, and one of my...
by markz
Jan 12 2019 9:25pm
Forum: E-Vehicles General Discussion
Topic: Kia Seed Car
Replies: 3
Views: 152

Re: Kia Seed Car

What about compartment safety?

I would buy that because its so light, but I'd worry about safety with other vehicles on the road, plus I wouldnt want a vehicle that looked too odd, rather have something that blended in nicely.