Endless Sphere

Henry111 wrote:I see the Bafang 8fun (750 watt) kit on USA dealer and distributor website priced anywhere from $500 to $800. While on alibaba I see them out of China (where they all come from anyhow) for low as $200. What's up with that?

I got mine from www.lectriccycles.com

In Stock

I have a "2 wheel drive" Yuba mundo cargo bike that has a thumb throttle on each side. Works very well.

I have one on my bike and love it. It allows you to pedal when going slow as well as when you are going fast. Very high quality. I also have a couple bikes that I put a Schlumph drive on and I like that as well. Although it costs more. You do have to mount a shifter cable with the FSA and do not wit...

Believe it or not....I have the 3500 watt on a Greyborg frame. Bike is pretty nice. I rarely go over 40mph

I have a couple battery packs..72 volt and another pair or high amp 48 volt and they are great. Also got a 3500 watt Crystalyte motor and wheel from them. i bought through local bike shop cause I wanna support them. Good stuff. I have called them a few times and tend to agree a little with previous ...

You will need spacers for the 170 mm width. Easy to do. Lyen controller is what I prefer. Sensorless. Fat bikes are a little tricky.
I would put a Cro motor on it. They already close to that wide. How are you thinking of mounting battery?

Are you guys still using batteries? I switched over to the "Flux Capacitor" years ago....of course I can only go 88 miles per hour

I have 2 bike that have Patterson Cranks and I love them.

I bet that your brakes are dragging

Ran into these at a watering hole!

Thanks for the kind words Grasshopper. I am just a beginner that is facinated by these machines. I sure have learned a bundle on here. I may just put my Gopro on my next ride!

Here is my Phasor Build. I do have to say that I have a Greyborg and a Raptor, plus about 4 other electric bikes along with a 2WD Yuba Mundo. This Phasor is a thing of beauty. I cannot say enough good about it. David designed a piece of E-Bike art! I did have to use a hydraulic cylinder to spread th...

Really nice looking frame. Can't wait till it is available.

These are very cool lites and mount

http://endless-sphere.com/forums/viewto ... =3&t=61667

I really like the way it rides like a regular bike if you want too. Plastic panels are great. I have a phasor, Raptor and Greyborg and i ride it the most

I started a thread here...somewhere.

Frame is one size fits all. I used a Crystalyte 3500 watt with 72 volt 15 amp hr and bike weighs like 85lbs

I just built a Greyborg...very happy with it. Call Jeremy Wolf and he will get you set up.His number is on the web site

Btw those towers store corn!

Way to go Troy

Hey Troy, If you can make it to Des Moines on Friday...you got a place to stay. I got this thing on Saturday and Sunday though. The 24 Hours of Cumming Gravel Race and Festival will take place on the gravel roads of central Iowa. Launching from Cumming, Iowa, this will be one of the toughest enduran...

Let me know when you think you will arrive in Des Moines. You certainly are welcome to stay the evening and get all charged up and do any repair work necessary. I am actually in West Des Moines, which is a suburb.

If you get near Des Moines, I have plenty of parts to help you fix your hot connectors. I use crimp style Ring Terminals and use little bolt and nut with tape for my connections, that may work depending on whether or not you need to disconnect them a lot. I wired a charging port so I never have to d...

If you go with the Schlumpf...Just make damn sure you machine the frame with their tool to the proper dimensions or it will spin in the frame. i have three bike with it and would use nothing else.One other bit of advice. Take the little 1mm set screws and throw them away and use button head for the ...

I am in Des Moines Iowa. You are more than welcome to stay the night here. I have half a dozen E-Bikes and would love to swap stories. We also have a very good E-Bike shop if you need any thing repaired.

Re: Qulbix, was Torque Raptor ebike + frame kit

by E-Fuel » Wed Jul 16, 2014 6:26 pm

I miss my bike! quote][/quote][/color]
Your bike inspired me to build mine![quote][/quote]