Endless Sphere

Hi guys, I’ve been upgrading my Sur Ron steadily and have hit a road block on suspension. I bought a 2021 fox 40 and discovered the upper triple clamp has changed (2020 fit ok iirc). Does anyone know of a compatible upper triple clamp that has a negative drop to avoid bottoming out? I also need a ze...

Hey guys, Has anyone used one of these controllers with a Mac geared hub motor from em3ev.com? I've got two of these controllers and love them, worked great on an old Bafang BPM2, an Edge 1500w, and a V3 MXUS but the Mac Motor seems to give it a bit of issues. I think I remember hearing about how th...

Hey guys, Due to a loose screw on my disc brake, I've managed to yank out my phase/hall wires from my Edge motor. Anyone have tips for pulling apart the Edge motor so I can go in and try to repair the damage? I've taken out the screws, pulled apart the motor part of the way and now the edge of the m...

Hi Emoto, Im interested but am in the US, if your willing to ship across the pond drop me a pm with cost to Cupertino, California 95014. I notice you mentioned 14mm axle is that the M14 axle for drop outs? I know they upgraded to M16 at some point for V3 but I'm actually looking for the M14. Thanks,...

I’d be interested in the mxus if I can squeeze it into my beta frame. Drop me a pm when free, I’m nearby in San Jose and can pick up

Thanks

Tim

Thanks Marty, I also see this is the address used from the shipment receipt for this group buy container: https://www.importgenius.com/importers/andrew-frey Going over my options, as phone calls have gone unanswered, I can file a complaint for online scamming over at www.ic3.gov If i'm not mistaken,...

Just picked up a 1500w from laebikes, Nader happened to pass by my neck of the woods and was nice enough to rendezvous. Used an 18fet from PowerVelocity and got it spinning with 14s. CA showed 100w at WOT from what sounded like the right phase combo (unloaded/bare hub). FF and hubsinks are in the ma...

Hi Endless, Just thought I’d start here in my search for a wheel builder. Need to lace a 1500w edge hub motor into a 29er rim and am curious if anyone with lacing experience lives in Bay Area or knows someone who they can refer me to. Im willing to drive anywhere between San Francisco and Santa Cruz...

Thanks Rix, The holy roller looks like the perfect mix tread wise for street and gravel, i have the hookworms from my previous build (now crashed) but if I find they rub I def will give the rollers a try. I put on some 29x2.6 Knobby Nics on my recently finished rigid build and the extra meat is grea...

Looking for some advice on motor choices: -Is the MXUS3000 still best bang for buck? -I read there is an aluminum stator Crystalyte but couldn't find pricing on those, or any pros/cons vs the MXUS. Is this the new hot stepper? -Thought about an Edge 1500w with FF/Hubsinks but I've got a pretty decen...

I guess I'm the only one who got burned from this group buy then? Don't want to bad mouth as Moto has been cool up until disappearing. I figured he was just busy so I've been amazingly patient but I feel I should put the warning out. Def don't pay with paypal as friends and family when buying online...

Does anyone have a phone number for Moto? or if you know him personally would you be able to drop him a line and ask him to pm me? I was hoping to get in contact regarding a refund if he no longer has the wheel to ship...

Thanks in advance

I should have a pic of the Beta in white soon Jay, front end is being built up as we speak! Quick question: What type of threading is the bottom bracket on the Beta? Need to know if its English or Italian. The GXP BB will be the last item on my parts list! Then its on like donkey kong :mrgreen: Sub ...

Has anyone heard from Moto these past few months? I'm waiting on a 19inch build atm, not trying to rush him but was hoping for a status update. I'll need to get creative to try and make this fit in my Beta frame and want to get started on the custom work.

I concede to your wisdom, thanks guys, will go beta + bpm for now.
Sam, are you by any chance selling some of those v2 axle hybrids? I'll gladly buy one of them laced or bare. Looks like I'll need to start hiding parts from wife in the office

Few questions for the gurus, after idolizing kepler's fighter, I built a 65 pound Kona stinky with 21s lipo and a bpm2 code 10 that was 40 miles per hour of great fun. That was until it and a car engaged in fisticuffs (I still maintain I won that exchange). What I'm left with is insurance money and ...

I assume this has sold? If not please let me know, I'm in San Jose/Cupertino area so right next door.

Thanks,

Tim

Just wanted to add an additional Motor combo that works well! Bafang BPM2 (Code10) matches exactly, phase and hall colors both. Was pleasantly surprised that first attempt was smooth and hassle free. With 21s i'm pushing 40mph (for short bursts as I have no temp sensor yet) Can't wait for the MXUS t...

I'd be interested in 1, assuming you're ok with shipping to US.

Thanks,

Tim

Can we all just agree, moto you are the man! Really appreciate all the effort you've put in to make this happen for everyone, also congrats on the healthy baby boy! I'm sure he'll grow up with all kinds of power wheels

I'm Interested in buying a pack if there are cells left, I'd like to fit them in a kona stinky triangle and saw the absolute max w/o cell holders appears to be 180 cells ( according to Atomek1000's build https://endless-sphere.com/forums/viewtopic.php?f=6&t=78781&p=1197822&hilit=stinky#p...

A little late to the party but just wanted to throw my bid in, if any one were to back out I would definitely be interested. Would prefer to purchase with a 19 inch wheel build + controller that could handle 21s lipo.

Thanks,

Tim

Hey endless, Just got my long time project started up again, running 14s lipo through a ku123 controller and bpm2 rear hub, throttle is an after market bought from local scooter shop. I plugged phase wires only and am running sensorless just to start, and plan to attach halls and a kill switch + e b...

-Motomech, Thanks for all of the helpful info. I knew it was only a matter of time before someone brought my feet back to the ground heh. I've emailed All-Battery to see if there is any custom options available. If a 14s PCB is not available, I may look into just tearing out the PCB altogether and t...

Nice! that looks simple enough for me to try and make. Definitely going the epoxy route followed by a layer of plastidip to hide it all. People underestimate the power of JB weld, the shear strength is ridiculous. You wouldn't think glue tape or velcro should be used on an ebike lol. I used industri...