Search found 65 matches

by Skrzypas
Feb 23, 2017 2:53 am
Forum: E-Bike Technical
Topic: A switch for shortening throttle
Replies: 2
Views: 271

Re: A switch for shortening throttle

Too complicated for me. Do you have it?
by Skrzypas
Feb 22, 2017 5:30 pm
Forum: E-Bike Technical
Topic: A switch for shortening throttle
Replies: 2
Views: 271

A switch for shortening throttle

What do you think of installing an additional switch that will shorten the throttle for cruising at full power?

It could be also equipped with a large linear potentiometer for having a precise manual cruising speed adjustment.

Anyone tried it?
by Skrzypas
Jan 23, 2017 2:18 pm
Forum: Battery Technology
Topic: Critique this 3D Printed Battery - 14S10P 29E
Replies: 9
Views: 704

Re: Critique this 3D Printed Battery - 14S10P 29E

I'd use 2-3 RC chargers like imaxb6. You can do each time a balance charge if you split the pack into 3 and you can skip bms. You're right, bms for new 29e cells is not so much a need if you monitor voltages. Make a thick (a few A capable) balance wires on each level and get them to a place, where y...
by Skrzypas
Jan 02, 2017 5:14 am
Forum: E-Bike Photos & Video
Topic: Ebike rope tow
Replies: 4
Views: 524

Re: Ebike rope tow

Great idea! What material is the rope?
by Skrzypas
Dec 31, 2016 2:06 pm
Forum: Battery Technology
Topic: Without BMS
Replies: 25
Views: 1282

Re: Without BMS

I've been using recycled laptop cells for the whole season right now. My setup has a bestechpower BMS 16s. Pack is 13p. The BMS is completely not needed in my opinion. I always charge at home or work, being nearby. I also stop charging before the BMS enters the balancing mode (it is designed for lip...
by Skrzypas
Nov 22, 2016 8:24 am
Forum: E-Bike General Discussion
Topic: Keyed on/off switch for security?
Replies: 3
Views: 336

Re: Keyed on/off switch for security?

I bought a cheapest key switch available online ca. 1-2$ delivered. It has a very simple "round" key with just one tooth. With infineon EB318 works perfect. I even lower a step down converter directly from it to power lights and a cell phone charger. The only drawback is that you need to put the key...
by Skrzypas
Nov 11, 2016 1:48 am
Forum: Battery Technology
Topic: Spot Welding Copper Strips to 18650 Battery Cells
Replies: 160
Views: 14497

Re: Spot Welding Copper Strips to 18650 Battery Cells

That technique can work well- but it is less consistent bc the electrodes are on different surfaces... and once you've popped the nickel on, you can't access the cell. And you have to do twice as many welds and it heats the can more. That's what slotting is for. K I tried this way on mine MOT half ...
by Skrzypas
Nov 09, 2016 4:25 am
Forum: Battery Technology
Topic: Common pack design mistakes, how to avoid?
Replies: 236
Views: 18665

Re: Common pack design mistakes, how to avoid?

Well it's a news for me. I hope I didn't do many welds in the middle of cells in my pack.
by Skrzypas
Nov 08, 2016 2:22 am
Forum: Battery Technology
Topic: Spot Welding Copper Strips to 18650 Battery Cells
Replies: 160
Views: 14497

Re: Spot Welding Copper Strips to 18650 Battery Cells

I didn't have big/any problems in soldering balance wires to nickel strips in my pack.
by Skrzypas
Nov 08, 2016 12:33 am
Forum: Battery Technology
Topic: Spot Welding Copper Strips to 18650 Battery Cells
Replies: 160
Views: 14497

Re: Spot Welding Copper Strips to 18650 Battery Cells

At this point, I still think the most practical solution is Ni plated Copper 110 foil because Copper 110 is available in many thicknesses. If using the parallel resistance spot welders, you need to make a slit in the foil to force current downwards to the foil-cell interface. The Ni plating may cre...
by Skrzypas
Oct 30, 2016 2:31 pm
Forum: E-Bike Technical
Topic: Can I fit a freehub on a hub motor threads?
Replies: 13
Views: 544

Re: Can I fit a freehub on a hub motor threads?

I have a Nine Continent RH2806 motor with a place to put 8 or 9 gears cassette. I don't know if 10 is wider than that or not, but if not, than here you have a possible solution. I had 3x9 but I decided to stay on 1x9 after few e-bike mode rides.
by Skrzypas
Oct 26, 2016 4:14 pm
Forum: E-Bike Technical
Topic: Simple range extender for Bestechpower BMS (and other also)
Replies: 13
Views: 554

Re: Simple range extender for Bestechpower BMS (and other al

Ok, I thought it's a common problem, that's why I started the thread. Regarding high range. Pretty often I drive distances of something like 40 km one way, and then I need to come back. Because many factors influence the range of the bike (eg. peddling force, wind, SOC before the trip), it may happe...
by Skrzypas
Oct 26, 2016 7:47 am
Forum: Large EV General Discussion
Topic: Semi hybrid system
Replies: 3
Views: 368

Re: Semi hybrid system

Thank you, actually I drive a Mazda :)

Will try to take their idea into account and maybe develop an easy conversion kit if my preliminary tests succeed.
by Skrzypas
Oct 25, 2016 1:14 am
Forum: Large EV General Discussion
Topic: Semi hybrid system
Replies: 3
Views: 368

Semi hybrid system

Hi guys, I can't find any information on such a system: What about separation of the electric system from the engine in a regular petrol car. Description in points: 1. Remove the belt from the alternator. 2. Add a pretty large Li-ion pack, 4S at least (CA. 14V) 3. start engine from the standard lead...
by Skrzypas
Oct 21, 2016 3:53 pm
Forum: Battery Technology
Topic: 18650 spot welding -how to- ULTIMATE REPOSITORY
Replies: 676
Views: 99313

Re: 18650 spot welding -how to- ULTIMATE REPOSITORY

The subject of copper has come up dozens of times and the discussion always comes back to pure nickel. While ES has been the source of many great discoveries I think this has horse has been beaten to a pulp. Nickel just works. Has anyone considered brass? :twisted: Roughly the same conductivity as ...
by Skrzypas
Oct 21, 2016 3:42 pm
Forum: E-Bike Technical
Topic: Simple range extender for Bestechpower BMS (and other also)
Replies: 13
Views: 554

Re: Simple range extender for Bestechpower BMS (and other al

Feeling completely not understood here... But ok, guys, you can monitor, plan and etc. I just wanted to have something that prevents my stupidity of using too much amps when the battery is almost empty, causing the BMS to cut off, when the battery sags too much. Adding another 16s string to my pack?...
by Skrzypas
Oct 19, 2016 4:03 pm
Forum: E-Bike Technical
Topic: Infineon controller stopped reacting to throttle input.
Replies: 5
Views: 323

Re: Infineon controller stopped reacting to throttle input.

I had similar thing when my battery circuit unsoldered itself. It had only a single point contact, so when I got on the bike, not more than maybe 1A was flowing. This gave very little power to the wheel. After lifting the wheel it was rotating with ca. 50% normal speed. Repairing the bad solder help...
by Skrzypas
Oct 19, 2016 9:48 am
Forum: E-Bike Technical
Topic: Throttle is always accelerating
Replies: 3
Views: 261

Re: Throttle is always accelerating

I have the same on nine continent infineon EB318 controller. Additionally my controller launches cruise control after few secs, and it is almost impossible to hold the throttle in any position below WOT for these few secs. Fortunately I have a possibility to program 3 favorite speeds and I use a 3 p...
by Skrzypas
Oct 19, 2016 7:56 am
Forum: E-Bike Technical
Topic: Simple range extender for Bestechpower BMS (and other also)
Replies: 13
Views: 554

Simple range extender for Bestechpower BMS (and other also)

Hi, I have an 16S Li-ion system with Bestechpower HCX-D131 BMS system in 16S version. The device has standard BMS functionalties, especially protects the battery from overdischarging during use. This means if you run out of juice, it cuts off the system and you can't run the motor until you connect ...
by Skrzypas
Sep 27, 2016 12:59 am
Forum: Battery Technology
Topic: What cell temperature determines its max output?
Replies: 13
Views: 731

Re: What cell temperature determines its max output?

Just guessing, maybe you'll find somewhere information on the temperature related mAh capacity of Li-ion cathodes or anodes? This should be in some scientific papers of li-ion developing research centers. But never searched.
by Skrzypas
Sep 02, 2016 1:46 am
Forum: Battery Technology
Topic: Quick 18650 question.
Replies: 15
Views: 711

Re: Quick 18650 question.

I don't see a problem with cells at 2 V. It's important to check if they heat up during normal charging (with a rate you plan to use) and discharging. Standard laptop cell that you are looking for should be completely cold at 1 A charge and discharge and holds min. ca. 80% of its original capacity.
by Skrzypas
Aug 18, 2016 1:12 am
Forum: Battery Technology
Topic: 18650 spot welding -how to- ULTIMATE REPOSITORY
Replies: 676
Views: 99313

Re: 18650 spot welding -how to- ULTIMATE REPOSITORY

Hi. I want to build a 20s6p with 25R cell. As I want 25A/cell (150A max battery) for 10sec max, can I use this kind of nickel? http://fr.aliexpress.com/item/FREE-SHIPPING-High-Quality-Pure-Nickel-Plate-Strap-Strip-Sheets-99-96-for-battery-spot/2054948107.html If I double it, will it be ok? Thanks N...
by Skrzypas
Aug 07, 2016 12:35 pm
Forum: E-Bike Technical
Topic: Infineon EB318 stopped working. Power supply failure?
Replies: 2
Views: 259

Infineon EB318 stopped working. Power supply failure?

Hi guys. I've been riding a 60V (16S) system with infineon EB318 and 9C motor for ca. 2 months. It was awesome until last week, when I tried to upload new settings to the controller, and during this operation, some pins of the programming cables probably have touched each other. Then I tired to uplo...