Search found 9 matches

by stamen
Aug 31 2018 9:00am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Re: Electric Buell racebike build

Ok so after getting the motor mounting situation resolved I attached the chain to check out the alignment and clearances. 24k gold :lol: IMG_1342.jpg IMG_1333.jpg I had to use some zip ties to hold the chain together. I will need to design some kind of chain tensioner/roller system right around wher...
by stamen
Aug 31 2018 8:59am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Re: Electric Buell racebike build

Hey everyone! Been busy the last couple of weeks with holidays and family visits, but I did manage to make some progress with the bike. 8) So here is the update... After getting the rolling chassis together I went on to mount the motor. That's where the first problem arose. The mount holes in the mo...
by stamen
Aug 18 2018 4:44am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Re: Electric Buell racebike build

Small update on the progress from the last couple of days. I managed to get the entire front and rear suspension and wheels assembled in order to get the rolling chassis. No problems so far... It was a great feeling to see it all come together and roll. :D Today I will mount the motor and attach the...
by stamen
Aug 18 2018 3:44am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: E-Ducati Build
Replies: 20
Views: 1274

Re: E-Ducati Build

Burntspot wrote:
Aug 17 2018 8:14am
I have been working on some more models/CAD files: https://grabcad.com/aastan.gadson-1
Thanks for uploading these! Do you know if the ME motor casing has the same overall dimensions and bolt hole pattern as the ZF 75-7 motor?
by stamen
Aug 14 2018 6:49am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Re: Electric Buell racebike build

I've ridden a few Buell's and my impression is the front end can be a little twitchy on change of direction under power. Yea the front end is pretty twitchy due to the short wheelbase and the small rake angle only 21 degrees!! But I plan to get a steering damper and if necessary a trail kit that ba...
by stamen
Aug 14 2018 4:31am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Re: Electric Buell racebike build

Next up was some work on the front fork. The inner tubes had some slight corrosion on them that was taken care of with a Scotch-Brite pad and some WD40. :wink: Then I took apart the entire fork assembly to clean out the internals. Everything was in decent shape but it was good to do a full service a...
by stamen
Aug 09 2018 1:12am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: E-Ducati Build
Replies: 20
Views: 1274

Re: E-Ducati Build

Well I guess our builds have some similarities 8). Good luck I'll be following it.
by stamen
Aug 08 2018 9:07am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Electric Buell racebike build
Replies: 14
Views: 2342

Electric Buell racebike build

Hi All, What: I've got a project that has been lingering around for a couple of years now and due to many personal moves and readjustments I never really had a chance to finish it. However, now I'm ready to start it back up and finish it for good. To make a long story short I originally intended it ...
by stamen
Feb 08 2018 3:48pm
Forum: E-Scooter and Motorcycle General Discussion
Topic: EU Road Legal Electrification (???)
Replies: 26
Views: 2482

Re: EU Road Legal Electrification (???)

Hey E-Zero I'm actually trying to figure out the exact same thing at the moment. I lived in the US and recently moved to Austria. I also have an E-moto conversion that I was working on, but wasn't able to finish it before I moved. My plan was to ship it over here and register it. I have spoken with ...