Search found 394 matches

by The Toecutter
Oct 21 2019 9:44pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Car replacement E-bike that fits me
Replies: 32
Views: 1902

Re: Car replacement E-bike that fits me

I agree, tried with a tape measure just not that accurate. have been shooting for no toe in or out. looks like its close now but can not let go it will start to shimmy after a few seconds. Thought about taking it to the tire store by me and see if they can check the aliment lol. You probably have a...
by The Toecutter
Oct 19 2019 6:16pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Car replacement E-bike that fits me
Replies: 32
Views: 1902

Re: Car replacement E-bike that fits me

So put the toe in back and added couple mm of toe in to it. but if I ride around 40km on a worn road it feels wild and I don't like that. The width from the edge of tire to edge of tire should be narrower in the front of the wheel than the back of the wheel by 1/16th of an inch. It sounds to me lik...
by The Toecutter
Oct 16 2019 2:54pm
Forum: E-Bike Build Threads / Photos & Video
Topic: E Velomobil
Replies: 29
Views: 1591

Re: E Velomobil

This is a great looking project.

Is it rideable yet?
by The Toecutter
Oct 16 2019 4:39am
Forum: Motor Technology
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 1505
Views: 192130

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

Does this same 235mm spoke length apply to the 1000W Leafbike motor?
by The Toecutter
Sep 25 2019 2:55am
Forum: E-Bike Build Threads / Photos & Video
Topic: ICE Sprint 26 with BBSHD build. (recumbent trike)
Replies: 20
Views: 712

Re: ICE Sprint 26 with BBSHD build. (recumbent trike)

Right now the trike has a 36t chainring and a 11-32 cassette. I see that Sunrace sells a cheap 11-40 cassette that fits and i have the old chainset with a 38t and a 52t ring on it. I can for fairly cheap convert to 38-52 chainring and 11-40 cassette. I can also convert to 42t chainring and a 11-46 ...
by The Toecutter
Sep 20 2019 1:24pm
Forum: E-Bike Build Threads / Photos & Video
Topic: ICE Sprint 26 with BBSHD build. (recumbent trike)
Replies: 20
Views: 712

Re: ICE Sprint 26 with BBSHD build. (recumbent trike)

I was on a 35km ride yesterday and one thing i instantly missed was more range on my gears. If im to climb by my own power i need a lower gear and if im to speed down a long hill i would need a higher gear. Anyone have any good options to recommend? I see five potential options that may or may not ...
by The Toecutter
Sep 13 2019 7:36pm
Forum: E-Bike Build Threads / Photos & Video
Topic: ICE Sprint 26 with BBSHD build. (recumbent trike)
Replies: 20
Views: 712

Re: ICE Sprint 26 with BBSHD build. (recumbent trike)

Is that your velomobile Toecutter? If so, do you have a build thread? That velomobile belongs to Orin Peters. I linked to that one because it is a design that will fit the OP's make of trike. Orin was able to reach more than 40 mph in it on flat ground at Battle Mountain, NV. There is no motor of a...
by The Toecutter
Sep 12 2019 11:08pm
Forum: E-Bike Build Threads / Photos & Video
Topic: ICE Sprint 26 with BBSHD build. (recumbent trike)
Replies: 20
Views: 712

Re: ICE Sprint 26 with BBSHD build. (recumbent trike)

I have to correct myself, i just got back in from a long ride, and i did 45kmh(28mph) with the trailer behind me. It was rough even on paved road. Before long, you'll be making a velomobile body shell for it. https://www.flickr.com/photos/okpeters/sets/72157651905111646/ Then you'll delight as your...
by The Toecutter
Sep 11 2019 5:34pm
Forum: E-Bike Build Threads / Photos & Video
Topic: ICE Sprint 26 with BBSHD build. (recumbent trike)
Replies: 20
Views: 712

Re: ICE Sprint 26 with BBSHD build. (recumbent trike)

This is a nice trike. I'd recommend keeping the front derailleur. Try doing 25 mph over a rough section of road where your trike gets hammered by potholes and see if the chain stays on. If it comes off, for sure you'll want the front derailleur as a chain stay, or at least SOME type of chain stay in...
by The Toecutter
Sep 11 2019 2:42pm
Forum: Motor Technology
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 1505
Views: 192130

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

Thank you all for the info. The seller wants to meet a few weeks from now. I'll have plenty of questions that they may not know the answer to, but since it is possible to take the motor apart to install new components for my requirements, then I know I can make it work regardless of what it has in it.
by The Toecutter
Sep 10 2019 10:53pm
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

I believe the idea that they may be more visible to motorists, especially here where drivers have to be more alert for obstacles in the road than they do in the States, but I don't trust any of them. You shouldn't. Ever. They can be looking right at you and claim they didn't see you. Unless I've ma...
by The Toecutter
Sep 10 2019 7:34pm
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

For this reason, I’d say go for a trike. You’d be much less likely to ride the sidewalk on a trike. Then, a clever build for a commuter trike is a tadpole fast enough to merge with trafic, with a high flag to be seen. I find riding a trike to be a lot less stressful than riding a bike on the whole....
by The Toecutter
Sep 09 2019 3:38pm
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

Yep trikes are the way! otherDoc Before I first rode one, I wasn't expecting I'd like it as much as I did. It's nice not being forced to be aware of the need to balance all the time and expend effort to do so, especially at stops, or to be constantly on the lookout for conditions that could destroy...
by The Toecutter
Sep 09 2019 10:31am
Forum: Motor Technology
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 1505
Views: 192130

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

Don't know enough to recommend. I know that the leafmotor handles 2k well but above that you need to watch the tempter. I bought pair of leafmotors at the same time. One came with a sensor installed and the other did not. The one with the sensor will not work with the CA3 but at least the wire is i...
by The Toecutter
Sep 08 2019 8:25pm
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

Whatever you choose to ride, if you don't have it already, get suspension. If you continue to stick with two wheels, get full suspension, and get wide fat bike style rims/tires, something suited for going over bumpy terrain at high speed, to facilitate quickly and easily switching between street and...
by The Toecutter
Sep 08 2019 11:38am
Forum: E-Bike Technical
Topic: 19" Motorcycle Wheels vs 26" Bicycle Wheels (rim and tires)
Replies: 2104
Views: 282393

Re: 19" Motorcycle Wheels vs 26" Bicycle Wheels (rim and tires)

Schwalbe Marathon Plus has got to be very low resistance looking at the treat pattern. but not too sure how good they would be in tussock grass :mrgreen: As far as bicycle tires go, the Marathon Plus are perhaps the most puncture proof but will not hold up to goat heads, and their rolling resistanc...
by The Toecutter
Sep 08 2019 11:16am
Forum: Motor Technology
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 1505
Views: 192130

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

ZeroEm wrote:
Sep 08 2019 10:40am
At 4K the tempter sensor needs changing or need to put one in if not using the kit to match the one you will be using. That is if you want to motor to last.
Any recommended models of this temperature sensor?
by The Toecutter
Sep 08 2019 2:31am
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

I think you might go very wrong if you try to operate such a thing in regular traffic in Southern California. The law limits you to 28 mph motor assisted. Even if we fudge up to 30 mph, that's not enough to let you flow with traffic. And in So Cal, traffic can get very congested and I'd imagine dri...
by The Toecutter
Sep 08 2019 12:18am
Forum: Motor Technology
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 1505
Views: 192130

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

So I've arranged to take a look at and possibly purchase a used Leafbike motor kit with 4T wind this coming weekend. I will have the opportunity to plug it up to a battery pack and test it. What items and potential problems should I be on the lookout for? I don't plan to use the controller/display t...
by The Toecutter
Sep 07 2019 11:38pm
Forum: E-Bike General Discussion
Topic: Ok, so I crashed again today...Is it time for a trike in the city?
Replies: 66
Views: 1426

Re: Ok, so I crashed again today...Is it time for a trike in the city?

So I am cruising down the sidewalk going to my organic garden. Up ahead of me is a young couple pushing a stroller with their child. They have their backs to me totally unsuspecting. Ahead of them is a man walking, coming toward me. I am not going very fast, maybe 8mph. So I think, I really should ...
by The Toecutter
Sep 07 2019 10:36am
Forum: Items for Sale - Used
Topic: 1500w 20" Leafmotor Kit in St Louis!
Replies: 2
Views: 400

Re: 1500w 20" Leafmotor Kit in St Louis!

If this is still available, I'd like to take a look at it and if everything works, make the purchase.
by The Toecutter
Sep 04 2019 11:43pm
Forum: Items for Sale - New
Topic: KMX Trike Front Suspension
Replies: 199
Views: 29683

Re: KMX Trike Front Suspension

the suspension adds quite a bit of radius to the wheels turning... G. Indeed it does. The fact that you've made your build work as in the picture you've shown AND got the clearances right is impressive. Even with computer modeling, that's not easy to do, because you're dealing with a lot of impreci...
by The Toecutter
Sep 04 2019 11:20pm
Forum: Items for Sale - New
Topic: KMX Trike Front Suspension
Replies: 199
Views: 29683

Re: KMX Trike Front Suspension

Thank you... greatly appreciated, I think the suspension was a huge part for making this happen. When Adam got in touch with me to test the rear suspension prototype the body was already made and I couldn't install it... otherwise I would've loved to have a full suspension velo-race-mobile-car... m...
by The Toecutter
Sep 04 2019 5:43pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Just built 20"wheel for mid drive, special hub and tire
Replies: 14
Views: 1769

Re: Just built 20"wheel for mid drive, special hub and tire

Any information regarding how well this tire has held up to your usage case? Mileage vs wear? Notable traits?
by The Toecutter
Sep 04 2019 5:35pm
Forum: E-Bike Technical
Topic: 19" Motorcycle Wheels vs 26" Bicycle Wheels (rim and tires)
Replies: 2104
Views: 282393

Re: 19" Motorcycle Wheels vs 26" Bicycle Wheels (rim and tires)

im now full convert to the sr241 religion, 19 2.75 front, 17 2.75 rear. they rock! great on road, grippy as hell, surprising low rolling resistance! they will take just about anything off road too. makes me ride in totally different style :mrgreen: they seem to last really well to boot. How do thes...