Search found 330 matches

by honya96
Apr 08 2020 1:38am
Forum: E-Bike Technical
Topic: Eaton APR48-3G 1.8kW Light Compact Charger PSU
Replies: 231
Views: 46684

Re: Eaton APR48-3G 1.8kW Light Compact Charger PSU

Pegazus wrote:
Apr 07 2020 8:28am
Add a knob for voltage adjustment and we have the Grail !
That's for voltage, we need current
by honya96
Apr 07 2020 5:04am
Forum: E-Bike Technical
Topic: Eaton APR48-3G 1.8kW Light Compact Charger PSU
Replies: 231
Views: 46684

Re: Eaton APR48-3G 1.8kW Light Compact Charger PSU

Yes please explain how :shock: I neeeeeeeed it
by honya96
Oct 03 2018 11:03am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Matters only what current you set.. 25 should be ok as peak. But you can't still hold full throttle. Yes, I totally forgot that the firmware gives the option to lower the current from the controllers max draw, doh. What happens if I full throttle then? Even stock fw can be set to half the full curr...
by honya96
Oct 03 2018 10:48am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Matters only what current you set.. 25 should be ok as peak. But you can't still hold full throttle. Yes, I totally forgot that the firmware gives the option to lower the current from the controllers max draw, doh. What happens if I full throttle then? You will overheat the battery or hit low volta...
by honya96
Oct 03 2018 7:03am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Right, easy.

But I wouldnt push them too much over these 5A..

Install a $1 thermometer on it, temp and voltage drop under load is the only limit.

you can't run 40A.. But more than 15 for sure.
by honya96
Sep 30 2018 5:36pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

BTW, If you have the pad assignments for Throttle, Hall V+ and Brake Low, written down somewhere, mind sharing them? I'm getting better at tracing leads back to the CPU pins, but I don't think practice is going remedy the headache. :D Throttle plus - TH Signal - TS Gnd - G2 First picture is red,whi...
by honya96
Sep 30 2018 4:26pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

"viscous" acceleration. Might be because definition of max current changed: It's now value/cal_a (without cal_b) so if cal_a is 10, 20 Amps would be 200, if cal_a is 5 as on 12 and probably 18 FET controllers, 20 Amps would be 100. Regarding your "requests", why don't you create...
by honya96
Sep 30 2018 12:45pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

the ones the starts at 60 euros but gives a great flexibility!! Big display should let us implement kind of that graphs in real time that Stancecoke is showing of current, or motor temperature, etc. Great! Here it is for 52$ https://s.click.aliexpress.com/e/c8L1svHA There is also a vertical version...
by honya96
Sep 30 2018 7:26am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

These are the photos I took when I first got the controller. It's external branding is "RisunMotors", and appears to be identical to one posted (by you stancecoke?) on the bitbucket site. Branding changes AGAIN on the amazon listing - a company called "HalloMotor" luckily these ...
by honya96
Sep 19 2018 3:21pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I'm in the process of modifying my S06S for higher voltages. Can anyone tell me the purpose of C1/C5/C14? (https://github.com/KingQueenWong/bmsbattery_s06s_controller_hardware/blob/master/S06S-Controller.PDF upper right corner) I wonder if their voltage rating needs to be raised if the max input vo...
by honya96
Sep 19 2018 2:41pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I guess its well documented here somewhere how to do it, maybe we can also reuse some code.. can you please point me to something what can help us? Thanks a lot. I think the Forumscontroller is exactly what you are looking for! https://github.com/jenkie/Arduino-Pedelec-Controller Sadly the document...
by honya96
Sep 19 2018 2:32pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I'm in the process of modifying my S06S for higher voltages. Can anyone tell me the purpose of C1/C5/C14? (https://github.com/KingQueenWong/bmsbattery_s06s_controller_hardware/blob/master/S06S-Controller.PDF upper right corner) I wonder if their voltage rating needs to be raised if the max input vo...
by honya96
Sep 19 2018 2:23pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Ok. Finally got the time to open the battery case. Do these pictures give any information about my BMS or it's overcurrent protection? https://imgur.com/a/30EvYLc EDIT: Found it. http://www.spardbattery.com/PW-10SM-30092-2-20 If you need more power, you can connect discharge without bms, just a fus...
by honya96
Sep 17 2018 12:23pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

honya96 wrote:
Sep 17 2018 8:44am
cpn wrote:
Sep 17 2018 7:51am
I had phase to phase short on 18fet open source firmware controller. It looks like as a result transistor is burned. Can somebody point me on right part I am not sure if is Y1 or Y2
Will check that when I get home. :wink:
It is Y2
by honya96
Sep 17 2018 8:44am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

cpn wrote:
Sep 17 2018 7:51am
I had phase to phase short on 18fet open source firmware controller. It looks like as a result transistor is burned. Can somebody point me on right part I am not sure if is Y1 or Y2
Will check that when I get home. :wink:
by honya96
Sep 16 2018 4:55pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I am trying to convince (or bribe) my brother to write a code for arduino nano, to send speed, battery bars, watts and motor temp ( for now) to LCD3, so it can work with any controller. WAIT!! Instead, ask your brother to program directly the LCD3!! We developed OpenSource firmware for LCD3, see he...
by honya96
Sep 16 2018 1:40pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Hello guys, I see some very interesting stuff going on here, would like to try but I am using different controllers right now :roll: I am trying to convince (or bribe) my brother to write a code for arduino nano, to send speed, battery bars, watts and motor temp ( for now) to LCD3, so it can work wi...
by honya96
Aug 22 2018 4:11am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

OK, I am now officially senile or maybe just retarded. I went back and looked at the listings for the S12S comtrollers I bought from BMSB. These are 36 or 48 volt controllers. There is another model that is 72 volts. The reason my controllers don't like 56 volts and above is because they weren't me...
by honya96
Aug 20 2018 3:15am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

So, Honya96 you were right. The experiment did not make any difference. So tell me, how would someone like me who is basicly clueless when it comes to programing or coding, what ever it is called, be able to take advantage of this custom firm ware? Try to set C5 to 00.. I can't help with custom fw ...
by honya96
Aug 19 2018 5:43pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Welding together a 15s 1p fooler pack to try that out. Will be tomorrow before I have results because both it and the main pack will need to be charged. Am I right in thinking that once I connect a 63 volt battery the controllers will remember and I won't have to do this each time? Thanks for the t...
by honya96
Aug 06 2018 3:45pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I think no one tested this..

Look at how the gates are parallel, I think it's like 2 paralel for high side and single for low side, so 6+3..

Where you bought this? I like that "design"
by honya96
Aug 04 2018 5:06am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Thanks for your answer. So to unlock the chip, I just use the java tool ? I dont overwrite that string (00 00 02 00 00 00 00 00) manually over the 00 00 00 00 00 00 00 00 00 already existing ? It's that extra 00 that's bothering me :( Do you know that you can limit the current on lcd3 with stock fw...
by honya96
Aug 03 2018 8:33am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Please does anyone know what kind of temperature sensor is used inside of lcd3? I removed and measured it, wanted to use externaly for battery temp. It was around 27k but I can't get anything with that value to work. Then I lost them and now I got 2 displays showing -34°C..
by honya96
Jul 21 2018 6:19am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4242
Views: 418948

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Yes, that now works (in German legal manner... :( ). There is some fairly severe oscillation or 'pulsing' of the drive though. Is the throttle being scaled by pas cadence - maybe that limiting needs smoothing out? No, the throttle value is used for the target current in the same way as in throttle-...