Endless Sphere

Thanks i will give him a call tomorrow.

I've bought a cheap 27.5" front wheel for now

Hi all I have just built my second E-Bike due to upgrading to a larger 29er bike, my original kit is a 60v 27.5" Rear and still on the cheap Chinese rim. i have called over 6-7 local bike shops to try and get my hub motor re built on my 29" rim with no joy!! for some reason nobody will touch it. If ...

"29 inch" is a marketing term that means 700C with a fat tire. Any city or touring bike rim is therefore a 29er rim if you put a 29er tire on it. Very narrow racing and sport rims will fit a 29er tire, but the tire will have to be overinflated to stabilize it on a rim that's too narrow. The wider a...

DT Swiss makes a 29er Rim, it is called the 485 D ( D means it is a rim for disc brake bikes ) it will be wider on the inside than a 700c rim so it will be better for your wider tires. DT Swiss also makes Rim's for e-bikes. When getting a hub motor, get one that has 32 spoke holes. and Your local R...

Hi all, I have been commuting on my 12s Dual drive Electric longborad for the last year and a half, but due to a slipped disc im finding it hard to ride for long periods of time, so I've decided to convert my 21" Cube Aim 29er. After a week of reading and searching the web I've decided on a hub driv...

Im only running a 9mm belt...its probably more to do with my size and the amount of hills around me, i know a lot of people run a 9mm belt with no problems, im waiting for some 15mm pulleys ive had made to use with SK3 motors, hopefully i will be able to run my 32T/14T ratio with a 15mm belt. Ive ha...

I have been swapping motors regularly, from a Turnigy 6374 192kv to a 6364 245kv on a single drive setup using 6s I have also tried 20T/40T.... 15T/36T & 14T/32T gearing, using anything lower than the 20T/40T i get really bad belt slip.... the more teeth in mesh on the larger pulleys definitely help...

Shame that is...Im running the older mout on a paris v2 truck with a single 6374 190kv and its solid, hasn't budged at all.

The look superb, ill definitely be having me a couple of those

Should have mine back this week from Bruno

Nice to see you've put the E-go battery to good use

I like my 6374 192kv, has loads of Torque on 6s..Hits 20mph and pulls my fat ass up hills with no problem I would definitely try an old brushless motor with your ESC before you hook up a new motor....You will be gutted if you fry another new motor! See if your local hobby shop will test your ESC for...

Thats a shame man...don't give up on it yet, i had the same sort of luck with my first build! Have you got or know anyone with an old brushless motor you can hook up to the ESC to see if thats still working..? Not sure if this is brushless but i have this from like 3 years ago, excuse my embarrassi...

Thats a shame man...don't give up on it yet, i had the same sort of luck with my first build!

Have you got or know anyone with an old brushless motor you can hook up to the ESC to see if thats still working..?

Doesn't look good Hope you get it sorted dude...

Hi Loads of info about the VESC on the forum...it might jus be bad luck that "tomtnt" Ego esc burn out....i have given mine a hammering on 10s up hill most of the time and my ESC wasn't even warm, not to say it going to last on 10s!! ...maybe 8s would be the safe option Yep, but maybe the question ...

Hey Jake.. It's sending out tomorrow. I'll message you the tracking number. Brilliant!!...the boards been off the road and me and my son want to go riding...Please Please dont forget to mount the hub gear on the new wheel like we agreed :wink: Also ...could you send them as gift please as i have al...

makithepaki wrote:i only did a short test ride with wiiciever and i love it. just sometimes the cruise controll is a little messed up.

I really want to try the wiiceiver....all the drop out and connection issues have put me off though!

I'll send you a new set once I get it.. Should be next week sometime. The new set is just smaller typical is around 16T/36T for my setups but the other's available are usually very similar. 12T to 16T for motor pulley and 32T/36T normally for drive wheel pulleys. The belt being as close to the whee...

Little update Torques 12s ESC Arrived yesterday along with the program card :D So did my Alien Drive system Mount, Hub and pulleys for my Abec fly wheels.... Must say Richard from AD is a top guy....because i want to run a 15mm belt on this set up and he is currently in the process of sorting out hi...

Hi Yes, he's modified the mount to take a 63mm motor, i should hopefully have it back next week, i think he is sorting the wiring out and its done! Loads of info about the VESC on the forum...it might jus be bad luck that "tomtnt" Ego esc burn out....i have given mine a hammering on 10s up hill most...

No way...gutted for you!

Ill carry on running mine on 10s until it dies, then replace with a vesc

Im no Expert but that definitely looks a tad on the loose side to me buddy...

You got to try this one too.. It beats the GT2B in my eyes. Simply because of the awesome small form factor. I'm so glad I got rid of the GT2B and didn't have to 3D print an enclosure. Uses (2) AA batteries and a 2.4ghz RC Receiver. Has lasted for about a month without changing batteries. http://di...

Sweet looking setup! How much does the deck flex? It looks like one of those "dancing longboards" Thanks..I've i went for flex 1...150 lbs - 250+ lbs and it seems to have just the right amount of flex for my weight And yeah its a dancer...obviously no downhill board but long as it cruises nice arou...