Search found 5 matches

by Scott76308
Jul 02 2018 7:42pm
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356713

Re: new cyclone 3000 w mid-drive kit?

Chainring is an 1/8 inch fixie, bmx or single speed chainring made for heavy duty 1/8" non shifting chain. It is bolted to a spider made by sick bike parts specifically for the Cyclone.
by Scott76308
Jun 14 2018 12:00pm
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356713

Re: new cyclone 3000 w mid-drive kit?

Wow!!! Up to 120 pages now. I think I have read about 80 in the past. I finally have my Cyclone build done and sorted out. It was a long road but I now have a kick ass 72v Cyclone full suspension Cannondale mountainbike. Has been done for a few months and I just haven't had time to play with it and ...
by Scott76308
Oct 28 2017 8:49pm
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356713

Re: I don't think my Cyclone rpm is as high as it should be!

Thank you so much for testing that! I did figure out my Kelly controller has a small connector for a 3 way switch. I think that will increase my RPM as it is only in the middle setting when disconnected. I thought something didn't seem right. I ran your test on my bike with cyclone 3000, stock 40amp...
by Scott76308
Oct 25 2017 10:16am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356713

I don't think my Cyclone rpm is as high as it should be!

I have my new Cyclone installed with a Luna 72v battery and Luna's 72v Kelly controller wired and programmed for the Cyclone and Luna thumb throttle with voltage gauge on it. Based off of my Calculations it is spinning about 450 rpm, full throttle at 25mph. I have had the bike to 32 but based my cal...
by Scott76308
Oct 13 2017 7:08am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356713

Re: new cyclone 3000 w mid-drive kit?

Can someone please tell me how to wire in the brake cut out switches. I feel like I read something a couple months ago but have spent the last 2 days trying to find it. I don't see any place to wire them up except possibly inline on one of the throttle wires. If so, which one? Also I want to try and...