Search found 47 matches

by Jonno
Dec 06 2018 11:01pm
Forum: E-Bike Build Threads / Photos & Video
Topic: First Enduro E Bike
Replies: 7
Views: 476

Re: First Enduro E Bike

can you post a picture of your battery layout in the frame and how much does the bike weigh?
by Jonno
Dec 06 2018 5:03am
Forum: E-Bike Build Threads / Photos & Video
Topic: First Enduro E Bike
Replies: 7
Views: 476

Re: First Enduro E Bike

Any specs?
by Jonno
Nov 19 2018 10:57pm
Forum: E-Bike General Discussion
Topic: Another Stealth bomber (clone) build
Replies: 144
Views: 6409

Re: Another Stealth bomber (clone) build

Hi Guys, I have given up on Sabvotons. I've bought 5 or 6 (yes I know) over the last few years. One is still running and one only lasted 8 miles :cry: . So I bought the APT AE96600....over powered, a bit bulky but awesome. I've done a little over 2000 miles feeding it as low as 84v HOC @ 26ah 20c bu...
by Jonno
Nov 19 2018 3:16am
Forum: E-Bike Technical
Topic: Programming APT AE96600 controller
Replies: 28
Views: 644

Re: Programming APT AE96600 controller

Hi Ammo1

Check pm and have fun :D
by Jonno
Nov 16 2018 11:44am
Forum: E-Bike Technical
Topic: Programming APT AE96600 controller
Replies: 28
Views: 644

Re: Programming APT AE96600 controller

Hi Larsb, Connect to the controller, click on flux weakening, in box idref 6 enter about 50 in box idref 7 enter up to 80 press 'write' always make the value of idref 7 higher than idref 6 The 2 pdfs will give you something to do :D Jonno APT1001.A2.02E.V1.0 - User's Manual for DriveManager - Gu2015...
by Jonno
Nov 16 2018 9:13am
Forum: Items Wanted
Topic: Axle for QS 205 v3 hubmotor
Replies: 7
Views: 273

Re: Axle for QS 205 v3 hubmotor

Did you manage to find an axle?
What's your location?

Jonno
by Jonno
Nov 14 2018 11:42am
Forum: E-Bike Build Threads / Photos & Video
Topic: Insanity V3
Replies: 41
Views: 1727

Re: Insanity V3

Hi Tony.

Great videos...I've been watching them for a while.
I've had the same bluetooth BMS for a while but only just got your app over the weekend.
It's Awesome! Keep up the great work :bigthumb:

Jonno
by Jonno
Nov 07 2018 1:28pm
Forum: E-Bike Technical
Topic: Beefing to reduce fork flex
Replies: 9
Views: 252

Re: Beefing to reduce fork flex

Wider handle bars would give you more stability and control.
by Jonno
Nov 01 2018 2:16am
Forum: E-Bike Technical
Topic: Programming APT AE96600 controller
Replies: 28
Views: 644

Re: Programming APT AE96600 controller

Larsb
You're welcome....

It's not as difficult as it looks. You won't be using a lot of the connections as the controller also is designed for bigger applications such as cars, forklifts golf carts etc.


Jonno
by Jonno
Nov 01 2018 1:54am
Forum: E-Bike Technical
Topic: Programming APT AE96600 controller
Replies: 28
Views: 644

Re: Programming APT AE96600 controller

Hi Larsb
I've got one on my eeb frame with a 96v QS205 motor
It's easy to program and a really reliable controller.
Plug and play.
What do you need to know?

Jonno
by Jonno
Oct 28 2018 3:45am
Forum: E-Bike General Discussion
Topic: Another Stealth bomber (clone) build
Replies: 144
Views: 6409

Re: Another Stealth bomber (clone) build

Hi shortcircuit911

Some wider handle bars would help higher speeds 780mm +.
Also altering the head angle on the forks by lowering the rear end gives much more stability at 60mph +

Jonno
by Jonno
Oct 25 2018 12:27pm
Forum: E-Bike General Discussion
Topic: Help magnets in hub motor
Replies: 21
Views: 635

Re: Help magnets in hub motor

Hi Doit,
I have some spare magnets (out of an scrap hub)
size approx 27 x 13.9 x 2.8mm
Have a re measure and I'll send you some if it helps.

Jonno
by Jonno
Oct 25 2018 11:31am
Forum: E-Bike Technical
Topic: Hub motor selection guidance: 3kw unbranded vs 5kw QS
Replies: 29
Views: 1036

Re: Hub motor selection guidance: 3kw unbranded vs 5kw QS

Hi guys, My EEB about 120lbs with a QS205 on a 19" rim + 5.6kgs of apt AE96600 controller and 100v @20.8ah. single speed as you can't keep up with it past about 17mph. Controlled via a CA V3. 3 position switch eco 100a, offroad 200a and mad 300a+. Weight is realistically not a factor on EEBs as you'...
by Jonno
Feb 21 2018 12:57am
Forum: E-Bike Technical
Topic: help sabvoton 72200 meltdown!
Replies: 10
Views: 1030

Re: help sabvoton 72200 meltdown!

Hi I had this happen on one of my sabvoton 72200s. I traced the problem back to where the cable exits the motor and the brake disc had cut into it. The short to earth will only occur when the disc retaining bolts pass over the cable. There is very little gap for the cable to pass through hence the p...
by Jonno
Feb 14 2018 12:14pm
Forum: Battery Technology
Topic: Turnigy Multistar - lightweight 10C cells
Replies: 514
Views: 58533

Re: Turnigy Multistar - lightweight 10C cells

Hmmmm.....you'e right there Dan, I may need a few more packs putting in parallel as the voltage sags somewhat after 50mph.

I'll see if I can get 12 more packs to fit giving 24s 6p or 100v @ 31.2ah

Jonno
by Jonno
Feb 09 2018 1:52pm
Forum: E-Bike Technical
Topic: Help Please, Bike cutting Out
Replies: 18
Views: 702

Re: Help Please, Bike cutting Out

Hi,
Check your battery cut off voltage setting on the CA (It's the 2nd page in where you set the battery type/number of cells/cut off voltage

and set it to 55v

Jonno
by Jonno
Feb 09 2018 2:03am
Forum: Battery Technology
Topic: Turnigy Multistar - lightweight 10C cells
Replies: 514
Views: 58533

Re: Turnigy Multistar - lightweight 10C cells

Hi Dan 4 cell 5200mah multistar -used on my sabvoton 72150, sabvoton 72200 and now a APT ae96600. They work fine and recover well, gets to 50mph in a burst don't know top speed cos it's scary ........ problem is the front wheel has an inability to stay on the ground and the back wheel spins at the s...
by Jonno
Feb 08 2018 5:01am
Forum: Battery Technology
Topic: Turnigy Multistar - lightweight 10C cells
Replies: 514
Views: 58533

Re: Turnigy Multistar - lightweight 10C cells

Hi Guys,

I have 24 (24s 4p) of these in my bike, they work well as long as you keep them all balanced and will push out 200a I've done 2500 miles with no problems into a 200a APT controller
FOI i bought an extra 11 packs last month as they were on offer @ £19.90 each

Jonno
by Jonno
Feb 07 2018 11:36am
Forum: E-Bike Technical
Topic: Sabvoton 150A
Replies: 2
Views: 390

Re: Sabvoton 150A

It does have a self learn setup (on the debug page) and yes it will take 150a if your battery pack Is able to supply it.


Jonno
by Jonno
Aug 29 2017 6:15pm
Forum: E-Bike Technical
Topic: Sabvoton SVMC settings for 80 amps max..
Replies: 3
Views: 540

Re: Sabvoton SVMC settings for 80 amps max..

Hi, Tell me a bit more about your setup. Do you have the temp sensor working? Have you set up the 3 position switch on the CA V3? Which SVMC model do you have? Is the throttle wired through the CA V3? If so have you set the up and down throttle rate on the CA V3? Let me know as I have 3 SVMC72150 an...
by Jonno
Jul 01 2017 1:44pm
Forum: E-Bike Technical
Topic: Help Enduro Frame Forks Loose? EEB Rings
Replies: 6
Views: 600

Re: Help Enduro Frame Forks Loose? EEB Rings

Ok I've just built another one. ..... 1st 3a as per pic an the bottom. on the top put 2a or 2b (this should fit snugly underneath 4b) Next fit 1b as per pic (slide partly into the bearing) lastly slide on 4b. Make sure bottom and top are seated into the bearing and tighten it all up. easier job with...
by Jonno
Jun 19 2017 12:50am
Forum: E-Bike Technical
Topic: Sabvoton ssc72150 unlocked to 200amp.
Replies: 2
Views: 405

Re: Sabvoton ssc72150 unlocked to 200amp.

Easy to unlock the SVMC72150 not so sure about the SSC though.
by Jonno
Mar 28 2017 9:50am
Forum: E-Bike Technical
Topic: ENDUROEBIKE.COM
Replies: 222
Views: 24959

Re: ENDUROEBIKE.COM

Hi Andy, Still sounds like a regulation problem to me In the Sabvoton software as that's what governs max amps/kws. I had lots of problems getting the software work properly with a 3 position switch so I now use the CA v3 to control the power parameters. I never had the problem using the original 5k...
by Jonno
Mar 28 2017 3:10am
Forum: E-Bike Technical
Topic: ENDUROEBIKE.COM
Replies: 222
Views: 24959

Re: ENDUROEBIKE.COM

Hi Guys,
Might be as simple as this:

Check your gain settings on the CA for amps and KW with the switch in position 3. They want to be set at 999. If they're set too low you will get the jerking as the CA is trying to limit the output.

Hope this helps

Jonno
by Jonno
Mar 06 2017 1:14pm
Forum: E-Bike Technical
Topic: ENDUROEBIKE.COM
Replies: 222
Views: 24959

Re: ENDUROEBIKE.COM

....getting bored with mine so I've treated it to a Cromotor V3 :twisted: Dump the 72v ncr18650pf pack Add 20s4p lipos @ 20.8 ah 10/20c discharge rate .....and lastly don brave pants :D .....So the Cromotor is now laced and fitted: Add a modified sabvoton svmc 72150 (Thanks to Bluefang ) Add a 250A...