Endless Sphere

FYI anyone have any thoughts on the pumps from the following supplier, they also have a 55mm and 80mm setup. Not so sure about the impellers. I am just hoping there are options to get metal impellers. https://www.aliexpress.com/item/4000147399664.html?spm=2114.12010615.8148356.11.3c0572a8NA0K0b Thi...

That sounds cool, I am trying to animate a PhD in fluid technical systems and my old connections to Formula1. I think building up a jet is not impossible. The hardest thing is spending money for the itereations and the prototypes. By the way, we have multi jet HP printer and also some DMLS metal pr...

I forgot to mention, I now have access to the best 3d printers in the world. Did a tour onsite and learned the machine operations to much to digest in learning. They can 3d print in metal too, which the service more expensive. Overall I see a future in production run for jet pump system using this c...

I also think, that the jetpump could be optimized e.g. more pitch. Has anyone optimized the MHZ Jet? I am also trying to build up a pump for 80mm, a target rpm 8000-9000....anyone interested You know, mhz is not efficient at all because it needs to run high rpm which causes to many problem and loss...

Hi It is the MGM 250-63 HBC - industrial version. It is more or less the same like the 400-63 RC version. The jetpump is a modified 64 MHZ version. By Fabian Great job on your board, you have been working on it for long time. I have the jet 64 setup on my jetboard too but the battery pack cannot ha...

chris_kline wrote: ↑

Oct 03 2019 6:22am

hit 75 kmph yesterday!
heres a video doing not quite full speed around 65kmph
https://youtu.be/BENxS1iLGjk

Your skills are madness!!! You really have all the tools to make Sh## happen.

@fabianpusch, Hey at all Today I have reached 23 MPH....was a good run in the early morning. I have promised to send some pics...but how can I do that from my Android mobile? Bye Fabian PS the mhz 64 is a good choice I think you need to upload the pics from the computer. Record a video and post a li...

Where are you standing now with your project?

Here it is fabianpusch

I see we all went ghost on this post . It seems like we all figured it all out. I will be testing soon, in the fiberglassing stage then Gel coat. I will be making a mold and start producing DIY jetboards if things go well with my new design.

srn wrote: ↑

Aug 30 2018 3:37am

Hello,

i changed my carbon impeller to a 3D-printed steel impeller. It is really impressive quality and less vibration.
IMG_3664.jpg

today I will make first measurements of power consumption. Will provide results later.

How much did it cost you to 3d print in metal?

All my photos are massive in size so I had to reduce it multiple time just to get it under 512kb.

Frizzo wrote: ↑

Dec 12 2017 3:38pm

to attach an image go here:

Screenshot from 2017-12-12 21-35-22.png

then, click on place inline

Are you kidding me!?!?!?! All this time I was struggling to add pictures for the longest since Ive been on here. I had never paid attention to the bottom.

When do you actually upload the video at full trottle, ropo? I´ll be very interested to see what is possible to take out from your motor. Also, I wrote to MHZ and ansked how much torque the Scorpion HK-7455-320KV has.... It has a 7,2 Nm Torque. Here is the data table of my Lehner 3060/9 Lasttabelle...

When do you actually upload the video at full trottle, ropo? I´ll be very interested to see what is possible to take out from your motor. Also, I wrote to MHZ and ansked how much torque the Scorpion HK-7455-320KV has.... It has a 7,2 Nm Torque. Here is the data table of my Lehner 3060/9 Lasttabelle...

About the 3d print impeller, Yes it does hold up pretty well in the water even with tremendous loud. The impeller has to be printed at 100% infill, in 0.1mm or 0.2mm and set as a high quality which takes longer. Yes, it was in PLA.

I used PE because Epoxid Resin should not stick to it. But because of a too rough surface, it is sticking like hell .. For my second Impeller, I applied normal candle wax on the surface. This worked very well. You should use pva film that is used in mold release to make it a whole lot easier for yo...

Hey ropo, here is a tutorial for designing a propeller in inventor: https://www.youtube.com/watch?v=-iVDzhGvre4 for the cast, just do a boolean difference between the propeller and a block of the right size. then you could also 3d print or cnc machine the mould. If you 3d print it, then use ABS so ...

Wow, you are flying and putting this together pretty fast! Do you have some engineering background in the watercraft field or some sort? It had taking me a verrrrrrryyyy long time to put a jet drive together. :lol: About your tig job you did pretty good, I use to be a top-flight in tig welding, I h...

oh the prop ended up being 79mm diameter with 70mm pitch. the reason was thats what the stainless tube was available in for the main chassis of the jet drive Wow, you are flying and putting this together pretty fast! Do you have some engineering background in the watercraft field or some sort? It h...

right now im not at the location with my prop mould. but heres the 3d model of it. and fresh out of the oven, a carbon fin! Pure Beauty in front of my eyes from the screen!!! I wish I can have your skills right now.... Do you share files? I have Autodesk too. I am almost jealous right now of your m...

oh the prop ended up being 79mm diameter with 70mm pitch. the reason was thats what the stainless tube was available in for the main chassis of the jet drive Wow, you are flying and putting this together pretty fast! Do you have some engineering background in the watercraft field or some sort? It h...

srn wrote: ↑

Dec 04 2017 3:31pm

here my mould out of PE.

How many impellers have you made out of the PE's negative mold?