Search found 40 matches

by coolbobjoe
May 03 2018 8:01am
Forum: Items for Sale - Used
Topic: SOLD - 22s6p battery for sale - Sunnyvale, CA $150
Replies: 9
Views: 635

Re: 22s6p battery for sale - Sunnyvale, CA $150

Yo stealth tahoe! hey guys sorry to threadjack buts its the other 22 cell guy from Sea Otter! just found your card in one of my shirt pockets with your booth number on it again. about to wrap up the completed 24x9 when can i come visit Tahoe with 12kw??
by coolbobjoe
Apr 29 2018 6:50pm
Forum: E-Bike Technical
Topic: Phase/Hall Troubleshooting
Replies: 2
Views: 188

Re: Phase/Hall Troubleshooting

Awesome Sauce! thanks buddy much appreciated for the info. will do some test riding tonight with that combo and post back about my results. if anyone else has had this happen plz chime in also! I have. But when I went WOT, and then released the throttle the motor Controller was doing some hard regen...
by coolbobjoe
Apr 29 2018 5:03pm
Forum: E-Bike Technical
Topic: Phase/Hall Troubleshooting
Replies: 2
Views: 188

Phase/Hall Troubleshooting

Got a bit of a headscratcher here now today folks. has anyone had four "valid" combinations? I have two that run at 30 mph with a 2.9amp draw coming from the battery, one at 2.5/30mph which i think is the right one? but then i have one that pulls 18 amps but goes 60 mph??? anyone seen this type of t...
by coolbobjoe
Apr 29 2018 2:19am
Forum: E-Bike Technical
Topic: 5V Light flashing
Replies: 0
Views: 178

5V Light flashing

Having some issues with two brand new controllers from em3ev that I need help diagnosing. No matter what type of pack or settings I try to run I cannot seem to get either the 6 fet sensored or sensorless version to work. have only gotten one 6 fet sensored to work out of the three originally ordered...
by coolbobjoe
Apr 09 2018 11:52pm
Forum: Items Wanted
Topic: A2B Metro Swingarm UK/EU
Replies: 14
Views: 1373

Re: A2B Metro Swingarm UK/EU

Amiran wrote:
Jan 22 2018 6:27pm
What has happened to my swingarm topic...
Anyway, I am not looking to buy it.
didnt you start this topic looking for one?
by coolbobjoe
Mar 16 2018 8:40pm
Forum: E-Bike Technical
Topic: Increase regen/braking strength with CA3?
Replies: 4
Views: 595

Re: Increase regen/braking strength with CA3?

Much better now! Yes, splicing in a wire to the ebrake connector on the controller did the trick. I originally assumed incorrectly that the Lyen Controller would support regen through the CA3 connector only. which wires did you splice exactly? and were you able to get proportional regen or just one...
by coolbobjoe
Mar 16 2018 3:51am
Forum: Vendor Relations Corner
Topic: WHERE ARE YOU DILLENGER!
Replies: 15
Views: 1851

Re: WHERE ARE YOU DILLENGER!

Still no word from Dillenger, I keep sending them emails, the sky might fall one day. :lol: you never will... well actually you might but it wont last long if it does... had to buy back the bike from the guy and its a joke. they said they put a 1000w kit on it. definetely still 750.... and the fram...
by coolbobjoe
Mar 09 2018 10:31am
Forum: Vendor Relations Corner
Topic: WHERE ARE YOU DILLENGER!
Replies: 15
Views: 1851

Re: WHERE ARE YOU DILLENGER!

Im sure their kits work phenomenally.... until they dont work anymore and then good luck sailing up shit creek with no paddles or sails. Will message Hyena and see whats up. Pretty dismayed at their response still and that the boss decided to take such a loss by buying the crap bike off the guy just...
by coolbobjoe
Mar 07 2018 7:25pm
Forum: Vendor Relations Corner
Topic: WHERE ARE YOU DILLENGER!
Replies: 15
Views: 1851

Re: WHERE ARE YOU DILLENGER!

Minus well post the outcome of the situation: Eventaully the dude who owned the bike started threatening our shop after telling him someone had to pay the bill and he accused us of egging his house in the middle of the night. After getting ahold of dillenger finally through email they said why was i...
by coolbobjoe
Feb 13 2018 1:54pm
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

If you will go to a single speed then just mill the axle flats further so you make the drop out width of the axle smaller. Are you saying to bore into the swingarm as to make the axle inside of it basically? Not really down on removing material from the already weak link in a chain No. Remove the a...
by coolbobjoe
Feb 13 2018 3:20am
Forum: Vendor Relations Corner
Topic: WHERE ARE YOU DILLENGER!
Replies: 15
Views: 1851

Re: WHERE ARE YOU DILLENGER!

Definetely slid into that PM box already, we will see if he shows his face after starting off his email conversation rude at at the start :roll:
by coolbobjoe
Feb 12 2018 9:54pm
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

Please register and insure your motorcycle, and stay out of bicycle facilities. Thanks. Work in a bicycle shop so can't really get out of here! lololol but seriously please take the hate somewhere else though! We have videos of people doing near 100mph through the streets on their bikes on here.......
by coolbobjoe
Feb 12 2018 8:24pm
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

SlowCo wrote:
Feb 12 2018 7:02pm
If you will go to a single speed then just mill the axle flats further so you make the drop out width of the axle smaller.
Are you saying to bore into the swingarm as to make the axle inside of it basically? Not really down on removing material from the already weak link in a chain
by coolbobjoe
Feb 12 2018 6:37pm
Forum: Vendor Relations Corner
Topic: WHERE ARE YOU DILLENGER!
Replies: 15
Views: 1851

WHERE ARE YOU DILLENGER!

So coming here today to both vent and hopefully take a shot in the dark to help out a client of my companies. Been through the ringer and back with these people. They refuse to call me, the service and warranty manager over here to discuss past payments YEARS past due and have completely stonewalled...
by coolbobjoe
Feb 12 2018 6:29pm
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

I might think that hacking one side off at a time and rewelding/sistering the opposite side might allow you to get it more even and true; then repeat for the other side. Do the heat treatment after welding and you are set.... Very solid idea actually. Any thoughts on filling the swingarm with more ...
by coolbobjoe
Feb 11 2018 11:32am
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

Looking into the newer QS Motors line with 200mm dropout widths for a custom Ebike project based on the A2B Octave/Metro Frames. Have developed newer 1/4" 4130 dropouts for both sides of the swingarm but am now looking to stretch the dropouts width from 155mm to 200mm to accept their higher torque ...
by coolbobjoe
Feb 11 2018 11:32am
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Re: Hot-setting 6061 Frame

a straight chainline is the least of my concerns at this point. My 100-200W of human pedal power is nothing compared to the 9kw coming from my hub motor. The pedals would be taken off at this point if it were not for the ALMIGHTY POWERS THAT BE WATCHING US ROADWAYS if you know what I mean. It curren...
by coolbobjoe
Feb 11 2018 4:04am
Forum: E-Bike Technical
Topic: Hot-setting 6061 Frame
Replies: 17
Views: 792

Hot-setting 6061 Frame

Looking into the newer QS Motors line with 200mm dropout widths for a custom Ebike project based on the A2B Octave/Metro Frames. Have developed newer 1/4" 4130 dropouts for both sides of the swingarm but am now looking to stretch the dropouts width from 155mm to 200mm to accept their higher torque m...
by coolbobjoe
Jan 17 2018 11:43pm
Forum: Items Wanted
Topic: A2B Metro Swingarm UK/EU
Replies: 14
Views: 1373

Re: A2B Metro Swingarm UK/EU

+1 for the cuts
All of the short ones have turned out to be either broken or broken on purpose.
I can scavenge the bins at the new work to see if we have anything for that stem otherwise I can order direct through a2b for you if I cant find it
by coolbobjoe
Dec 25 2017 7:27pm
Forum: Items Wanted
Topic: A2B Metro Swingarm UK/EU
Replies: 14
Views: 1373

Re: A2B Metro Swingarm UK/EU

I have both mudguards for you. frock that guy selling that swingarm. shipped it to me and theres big ol stress cracks down both sides of the stays. way to be a piece of shit! selling off my a2b metro 72V 5kw now. who wants parts? Just making the jump to the FUTR ALPHA frame early I guess
by coolbobjoe
Dec 21 2017 12:05am
Forum: E-Bike Technical
Topic: can i use 22s bms on 20s battery (lipo) by just paralleling
Replies: 1
Views: 467

Re: can i use 22s bms on 20s battery (lipo) by just paralleling

Ill buy it off you if it doesnt work out. let me know when it comes in
by coolbobjoe
Nov 09 2017 10:56am
Forum: Items for Sale - New
Topic: 6pence Resistance Spot Welder
Replies: 178
Views: 22898

Re: 6pence Resistance Spot Welder

And down goes the spot welder.... Finally got everything assembled and sourced and started getting work done on the 22s7p battery I have been waiting forever to build. First night was a total success. Got almost half of the battery done and a couple thousand welds put into the unit. Put everything a...
by coolbobjoe
Sep 13 2017 1:57am
Forum: Vendor Relations Corner
Topic: Mr. Edward Lyen Lying?
Replies: 9
Views: 1579

Re: Mr. Edward Lyen Lying?

yes, 10-12 amps it cuts out now awesome.