Endless Sphere

forgot to put in picsIMG_20181123_154433260.jpg

As a science project, and a way for my 16yo son to practice his welding skills learned at his high school we built this. An 1080 watt solar solar cart with 3000 watt inverters. Only standard lead acid t 105's at 36v I'm afraid. Other options include 6 point misting system supplied by back pack garde...

there is a alternator, starter repair place in my town. check for one near you. perhaps for a few extra bucks they can cue yours next .

amberwolf wrote:Those aren't "amps".

They are "Amp-hours", commonly abbreviated Ah.

They do not mean the same thing at all.

If you don't use the right terms, it's confusing to everyone, including you.

just describing as the retailer does,

You're conflating amp-hours (charge quantity) with amps (current). At the same voltage, your controller will draw the same current unless the battery voltage sags enough under load to limit it. So you can have 7Ah or 7,000Ah, but the controller will put out the same peak power at 24V. Also, adding ...

Thinking of puting 2 chrome gel cell 15amp in the packs for a combined 60 amps at 24 volts. Do ya'll think the stock speed control can handle the amps?

hmmm not working

found this https://cart.electricscooterparts.com/P ... =KIT-CT500 , and it works fine. changing out the stock 10 amp batts for 15 amp and will raise the deck. controller should handle the extra amps it's rated to 30 amps.

Kit is in and it's working fine. Waiting on two 15 amp sla batts to come in , and a 4 amp charger, then will raise the deck like electrogod
did.

Don't bother...there are better options than replacing your blown one with another one. If you are daed set on just doing a parts swap, get on craigslist and look around. You may find what you are looking for there. These little scooters were fairly popular a few years back and sold a lot of them. ...

Looks like my speed controller may be shot on my ancient Currie Phat flyer. Need Advice on testing the internal speed control, motor, or where to find a new or used one. Anyone install a external speed control? Everyone seems to out of any internal speed control brushless motor that will work. Desp...

Need a currie phat flyer motor asap . New with upgrade power would be best, but used is fine too! No one has the internal speed control motor in stock due it's age. 985/707/4956 I uber deliver on it and a e trailz bike. Got into a routine of letting one charge while riding the other. Now I'm a bit l...

I desperately need help with my Currie Phat flyer. Think I need a new motor as the speed control may be toast. Nobody has a new motor in stock as they are ancient. Do you know of any source or are willing to wire mine for external speed control?

Looks like my speed controller may be shot on my ancient Currie Phat flyer. Need Advice on testing the internal speed control, motor, or where to find a new or used one. Anyone install a external speed control? Everyone seems to out of any internal speed control brushless motor that will work. Despe...