Endless Sphere

Mxus came back to me with this so feel better now plus the one thing I never stated when making order was axle size. Or well nether mind I am only 75kg and don't go crazy so should ok

142mm open size we will use 14mm axle, 135mm open size we will use 16mm axle

Hi guys. I just got a mxus 3k v3 motor and it has 14mm axle bolts? To my understanding the v3 was upgraded to 16mm axle Is this a v2 ??? I bought it from mxus store on alibaba I was clear in making my order and everything seemed to go well. From what I can tell it does seem to have 4mm phase wires a...

Thankyou very much alexayala. Very understanding answer
I will get power from my controller throttle

Thanks again dude

Hi all. Reading a few horror stories about people blowing there cycle analyst Please can someone tell me if it's safe to use this pas sensor https://www.ebikes.ca/shop/electric-bicycle-parts/torque-sensors/pas-12p-chr.html Plugged in to the pas plug on 10v running a 22s battery fully charged 92v Wil...

Thanks for that John that's what I thought. I am glad you chimed in as I was going to initially pm you my question as I know you know your stuff.. I ran the 22s today did around 30 mile and it was nice to have the extra capacity had fun with burst of 4.5kw. (my cycle analyst limits to 4.5kw) Had no ...

Thanks guys...it's just I have the 4s pack sat there doing nothing so thought I might be able to put it to use. I could rearrange my packs and run a lower voltage but with 3x6s and 1 4s it's a little difficult as I have no experience splitting lipo packs

Thanks again

Hi guys I am currently running my leafmotor on 18s lipo 75v fully charged. I have another 4s pack that I used to use with my mxus. Can I add this 4s pack and run 22s 96v fully charged to give a little extra range?? I normally pull around 4000w bursts but most of my riding is around 250-1000w with pa...

Wrong forum

Interesting discussion guys I will try both 12s and 18s lipo and see how it goes

Mxus 3k turbo v3 4t in perfect working order Side covers are scratched where rear mech and caliper have been rubbing but only cosmetic Comes laced in 26 inch moped rim with mega range 6 speed cassette. Dropout required 142mm Tyre and disk not included Under the red heat shrink are the 2nd set of hal...

Thankyou very much that's what I will do as i want efficiency too

Many thanks for your help

thanks for the useful info dude not sure of the winding but assuming its default would you recommend i stick to 12s lipo 50,4v fully charged?

thanks mate. i might just bite the bullet and get a phaserunner and run at 60v. i like how compact they are..

would this be a good combo?

Thanks Balmorhea I already have a few 6s lipo 10ah packs that I have been running for a while with no problems pulling peaks of 60 amp but mainly peaks of 30amp and avaraging around 10 amps out of them on my commute Yes them controllers look alright but there out of stock Any idea on how often they ...

I picked up one of these motors locally but with no controller
Please could you knowledgeable guys recommended me a controller for best performance and silent running

Thanks in advance

Yes thanks for all the suggestions guys I am leaning towards just keeping the mxus and reconfigure my packs

But also hearing Alot about the leaf motor so might pick up one of those

Thanks for your help guys

Yes like vortecks bike. I did get creative for the battery got plenty room see link Yes I know 96v is excessive for 35mph but I am just letting you know what I was running I built the bike 2 years ago and it was all about power then but now things are different hence the change. Done over 2000 miles...

At madrhino. I do enjoy riding the bike I love it its been great and handles my weight with ease. Was just looking for something lighter and not as powerful. Sorry if this is not up your street

Thanks for the suggestions guys. I have tried to sell the whole kit bike battery's and chargers but got no interest maybe I was asking too much I have since just listed the hub controller and display put will probably end up just selling the mxus https://www.ebay.co.uk/itm/114347314974 I am have bee...

Hi guys I need some help in downgrading my mxus v3 turbo There is nothing wrong with the mxus but I don't need all that power and want something a little lighter/efficient The problem I have is I don't know which route to take Option 1 sell all my gear and buy a new 1500w kit Option 2 just sell my m...

How about voodoo canzo. Think it's the version before the one that's out now at halfords in the UK

Hi guys I just want to know if my system is running as it should be Mxus 3k 4t Sabvoton 72150 this one https://www.cloudsto.com/store/andy-kirby-e-bike/sabvoton-72v-100a-sinewave-controller-372-detail.html I am running 18s lipo 18ah Charged full at 75 volts Voltage drop under hard acceleration is do...

Thanks guys. And also eee291 it's like what you have both suggested. I got in touch with dealer and he rapidly got in touch with his people in China and came back to me with this All you do is connect the switches on the brake levers to the purple and black wires, you can actually connect the brake ...

Is it diagram for you controller with CA? If colors correspond then it might be. Also something needs to be changed in controller application on computer. Hey thanks dude. Yes that is similar to mine but mine only came with one 3 wire throttle which is the one I cut shown in my picture and is red b...

Hi guys need a little help. Just installed a new 72150 and can not find the correct wiring for the regen. I have a thumb throttle which I would like to use for varible regen. I have already tried connecting the thumb throttle to the 3 wires you see cut in the pic and the throttle worked as a normal ...