Search found 21 matches

by Kimovitzh
Sep 04 2018 10:50am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

The file you send shows limits of 80kph and 70kph for presets 1 and 2 respectively, so this bike will never get to 105kph. You may have made a change when experimenting and forgotten... (happens to me all the time) Are you sure that it's my file that you looked in? I've just opened the one that I s...
by Kimovitzh
Sep 04 2018 7:46am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

Holiday weekend - so a quick answer... But when I engage preset #1 again it just presumes the Auto cruise. Before the update it was reset so it didn't just engage when shifting back. Does this make sense? I need to look this up but I believe this may be a known issue. I'll get back. 2: I've noticed...
by Kimovitzh
Sep 03 2018 7:50am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

Before hand, sorry for my ignorance please ask if you need any more info. I have now been out testing the settings and I have almost hit the same settings as before the update. Two things hare bugging me though. 1: Iv'e got 2 presets, and on one of them I have Throttle Auto Cruise enabled (Preset #1...
by Kimovitzh
Aug 27 2018 3:33pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

Ok - apologies for the confusion. Also - the Help file explained the hardware override for the Console Button Hot Swap feature but did not mention the preset parameter override. I just updated the Help/ToolTips so that will be cleared up in the future. Thanks for bringing that up.... :) No need for...
by Kimovitzh
Aug 27 2018 3:30pm
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Re: Bouncing rear wheel.

Lower tire pressure might help a lot. I'll try that, I'm at 2,3bar right now. It sure is a heavy rear wheel, 21kg assembled :oops: But I guess that motorcycles and scooters also have a lot of this unsprung weight :? Motorcycles do what they can to _minimize_ unsprung weight in the wheels since it's...
by Kimovitzh
Aug 27 2018 3:23pm
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Re: Bouncing rear wheel.

amberwolf wrote:
Aug 27 2018 12:21pm
Somethingg you could check is if under sideloading the swingarm is binding and releasing.
Just had the entire swinging mechanism disassembled, no signs of binding were to see.
by Kimovitzh
Aug 27 2018 3:22pm
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Re: Bouncing rear wheel.

Rebound control is pretty limited on most bicycle shocks. Thus it is the most difficult part of the rear suspension tuning when you fit a hub motor. While some shocks only require thicker oil, some other can’t be tuned to dampen a heavy wheel without mod. It is usually enough to mod the damper valv...
by Kimovitzh
Aug 27 2018 3:16pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

When I learned that I starts at #2 regardless I figured that it indeed is easier to switch the presets.

Thanks for the insightful help!
by Kimovitzh
Aug 27 2018 2:22pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

I've got a CA3 Rev.3 It had FW 3.0 AFAIK. reed switch is NO and is wired up to POT and GND. I chosen Analog AUX settings as 2-Pos SW controlling presets. Just tested and yes it starts on #2, I just assumed it to start on #1 because that what I set it to. Is there a way to change this? So a NO contac...
by Kimovitzh
Aug 27 2018 12:54pm
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

I dunno how, but got it working! Updated to 3.12 ... wow such settings much different! My old settings were erased so had to start from scratch :( I'm stuck at the AUX settings, I can see that it's a bit different and I'm now stuck. This is what I had going before the FW update: I've got a magnetic ...
by Kimovitzh
Aug 27 2018 11:00am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

teklektik wrote:
Aug 27 2018 10:13am
This is the linux version, correct?
No, it's the Mac version.
by Kimovitzh
Aug 27 2018 10:19am
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Re: Bouncing rear wheel.

It sure is a heavy rear wheel, 21kg assembled :oops:
But I guess that motorcycles and scooters also have a lot of this unsprung weight :?
There must be a golden unsprung weight to sprung weight ratio that I'm unaware of :wink:
by Kimovitzh
Aug 27 2018 9:27am
Forum: E-Bike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4483
Views: 701275

Re: Cycle Analyst V3 preview and first beta release

So I got the " Unable to communicate with the Cycle Analyst in a timely manner. " problem, and was happy to read that CA3-12 could fix this. But when I try to update I get this: https://dzwonsemrish7.cloudfront.net/items/20383c3Z022X1S0Q030J/Skærmbillede%202018-08-27%20kl.%2016.21.08.png?v=edefa45c ...
by Kimovitzh
Aug 27 2018 6:36am
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Re: Bouncing rear wheel.

Me? Ride like a mad, nah. It can't be that 8)
by Kimovitzh
Aug 27 2018 4:45am
Forum: E-Bike General Discussion
Topic: Bouncing rear wheel.
Replies: 13
Views: 477

Bouncing rear wheel.

Hi. I've got a problem with my rear wheel, it sorta "jumps" whenever I make a somewhat sharp turns above a certain speed. Could this be solved with fine tuning my rear suspension or is it just something I have to live with? Specs of rear wheel setup: Bike: Mongoose triple black diamond Motor: QS 300...
by Kimovitzh
Jan 28 2018 1:58pm
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Re: Sabvoton 72150 Programming Problems

Changing the phase wires did not help, now the "Slide recharge" just accelerate backwards :roll:
I am now quite confident that i'm having a faulty controller :(

If you decide to buy from QS, I can highly recommend them, they provide great service!
by Kimovitzh
Jan 27 2018 7:25pm
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Re: Sabvoton 72150 Programming Problems

Dosen't work here. So I've contacted QS motor as they are my supplier, and they are waiting for an answer from Sabvoton. Great service from QS, I must say! In the meanwhile have tested numerous of combinations but still with no succes. Update on findings. My motors rotation from factory is backwards...
by Kimovitzh
Jan 27 2018 2:59am
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Re: Sabvoton 72150 Programming Problems

So just to be sure.
What would you do if you make a change?

Would you then do it like this?
Edit the setting.
Press OK.
Press yes for parameter store.
Press OK.
Turn off ignition.
Remove USB cable.
Disconnect battery.
by Kimovitzh
Jan 26 2018 5:41pm
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Re: Sabvoton 72150 Programming Problems

It's called "orange ignition" here :roll:

Image
by Kimovitzh
Jan 26 2018 2:50pm
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Re: Sabvoton 72150 Programming Problems

I was having the same issues until I used the key switch wire to shut it down (reset) vs the main power connection. It has been relatively reliable on saves since for me. Hall test still fails. Runs good regardless. I have some new hall sensors to install next time I pull the motor apart if I find ...
by Kimovitzh
Jan 26 2018 11:55am
Forum: E-Bike Technical
Topic: Sabvoton 72150 Programming Problems
Replies: 16
Views: 2140

Sabvoton 72150 Programming Problems

Ok ... where do I begin. Iv'e got at QS 205 hun motor, Sabvoton 72150 and a cycle analyst v3. When I first hooked up the Sabvoton to my PC and began the hall angle test, it went fine, saved the new angle number (245), and did the parameter store and shut it of. Turned et on to discover that the moto...