Search found 7 matches

by ryanf55
Sep 01 2019 4:31pm
Forum: E-Bike Build Threads / Photos & Video
Topic: Scott CR1 | X1 Pro | 14s 45a
Replies: 6
Views: 433

Re: Scott CR1 | X1 Pro | 14s 45a

I plan to do something similar, but saw your display is rotated 90 degrees. Is there an option to specify that in software or something so you aren't reading everything sideways?
by ryanf55
Jan 16 2019 12:14am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

That's easy:) So I got the replacement throttle hall sensor working. Had to use an Arduino to invert the signal, but it works alright. For whatever reason, the new sensor is very jittery, and makes the throttle jump around a bunch, so I implemented some mediocre filtering. Also, the controller is s...
by ryanf55
Oct 03 2018 12:15am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

Having a multimeter to check continuity and voltage (+5V, battery resting voltage, voltage under load, and Hall sensor return voltage) is very useful for what you're doing). How do you check the signals under load? The best I've done is tape the multimeter to the frame and ride it. You can do that,...
by ryanf55
Oct 01 2018 10:58am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

Chalo wrote:
Sep 04 2018 12:07pm
Having a multimeter to check continuity and voltage (+5V, battery resting voltage, voltage under load, and Hall sensor return voltage) is very useful for what you're doing).
How do you check the signals under load? The best I've done is tape the multimeter to the frame and ride it.
by ryanf55
Sep 24 2018 5:59pm
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

Hello, I was taking apart my Cyclone half twist throttle (going to redesign it), and one of the twist throttle sensor pins came apart. I can only read the 2nd line of text on it as "5030". Has anybody taken their apart, or mind posting a close up of the IC so I can order a new one? Edit: I was able ...
by ryanf55
Jan 29 2018 3:15pm
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

Thanks for the offer, but I was looking for where to get spacer bolts to offset a guard over the motor like in this one I found: https://electricfatbike.files.wordpress.com/2016/01/chain-coverl.jpg To flat tire: I'll open the case up and look for a shunt resistor. I know there has to be once since t...
by ryanf55
Jan 26 2018 1:54am
Forum: E-Bike Non-hub Motor Drives
Topic: new cyclone 3000 w mid-drive kit?
Replies: 3210
Views: 356778

Re: new cyclone 3000 w mid-drive kit?

Hello all, first post here on Endless Sphere. Two questions regarding the Cyclone Fat-Kit from Luna I've installed on my Fat-Bike... 1) Does anybody have a recommended way to install some spacers over the drive-side motor bolts to add a chain guard? I plan to cut my own guard out of aluminum. 2) Is ...