Search found 12 matches

by banora
Mar 18 2019 10:55am
Forum: E-Bike Technical
Topic: Hub motor won't spin no matter what i do
Replies: 8
Views: 524

Re: Hub motor won't spin no matter what i do

That's the thing. I've tried every possible combinations but it just doesn't work. Both the controller and motor have been changed to a new one too.
Anyway here's the picture.
motor wire new-modified.jpg
by banora
Mar 18 2019 10:03am
Forum: E-Bike Technical
Topic: Hub motor won't spin no matter what i do
Replies: 8
Views: 524

Hub motor won't spin no matter what i do

Hi guys need some help here.
No matter which combination i use the motor wouldn't spin, only making some noise. I have no idea what's the problem and i had changed both the motor and controller but it still wouldn't work. Would appreciate any help thanks.

Controller: YKZ7250JG
by banora
May 17 2018 4:46pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

I've just tried what you guys said but it's not working. I tried wiring my on/off switch's red and black wire to the alarm's red and black wire and the green wire to the thin red wire on my controller. It seemed to work but only the on/off switch's led is turned on permanently. Tried pulling the thr...
by banora
May 17 2018 1:24pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

Thanks guys, i'm gonna go ahead and try it out.
Those extra two wires are red and black so i would assume it's to power on the led indicator.
As I'm running a 2-WD system, do i only need to do the connections on 1 controller or do i have to do both?
by banora
May 17 2018 9:19am
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

So i should solder the red wire on my ignition switch to the main battery line (+) and the thin red wire?
And should i make a cut on the main battery line (+) ?
What about the rest of the wire on the ignition switch? The black and green ones.
by banora
May 16 2018 10:46pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

Controller wires.jpg This is my controller with it's wires if it helps. It's a Yuyang King YKZ7250JG with bluetooth module already connected. As i'm going with a 2-WD setup, everything just confuses the heck out of me. Not to mention everything is in chinese. As of now, i know how to connect the th...
by banora
May 16 2018 10:23pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

Your controller sounds pretty typical. Yes you can solder the wires as long as you make sure they are the right ones. For the ignition line, you place your on/off switch between the skinny red wire and the fat red wire. The meter can go to the skinny one so it gets turned off with the ignition. The...
by banora
May 14 2018 12:17pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

Cant seem to post photos because file size is too large.
by banora
May 14 2018 12:09pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Re: Controller to throttle and digital voltmeter panel

The red wire i mentioned is not the main battery lines. It's an entirely separate single red wire that has chinese lettering on it which i can make out. It stands for power. So i'm wondering if that wire can be connected to my voltmeter panel.
by banora
May 11 2018 1:55pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Evo e scooter 36v 800w more speed + range help
Replies: 21
Views: 3386

Re: Evo e scooter 36v 800w more speed + range help

Increasing your battery volts and ah will increase both your speed and range.
by banora
May 11 2018 1:35pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Controller to throttle and digital voltmeter panel
Replies: 13
Views: 1865

Controller to throttle and digital voltmeter panel

Hi guys newbie to the forum here. I decided to build my own scooter and bought most of the parts online. I'll be running a dual motor/controller setup. Everything has arrived and i'm excited to put them together. However i ran into some problems Firstly the connectors for the throttle is different. ...