Search found 49 matches

by Kisazul
Apr 04 2019 12:52am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

la8rat wrote:
Apr 03 2019 9:09pm
i just swapped to a 110 bcd 38 tooth. can go as small as 34 tooth on standard spider.. its hilly here as well
I already have 110bcd and 34T. But I want to try 104bcd and 30T.
by Kisazul
Apr 03 2019 8:30pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

I'm going to steep hills. So I need a little gear in front. I bought a 104bcd spider for TSDZ2, but it is without a rubber seal. Need to install.
by Kisazul
Apr 03 2019 6:02pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Hey. There is an old and new version of aluminum spider on tsdz2. The new version comes with a smaller diameter for the rubber seal. But the old version comes with a big rubber seal. Who can help determine the parameters (dimensions in mm) of the old version of the rubber seal?
by Kisazul
Feb 18 2019 7:18pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

I also often come across the disconnection of motor assistance due to the displacement of the magnet on the spokes. On the other hand, this tells me that I need to adjust the position of the magnet so that all motor functions work correctly (measuring distance, speed, etc.) But disabling the speed s...
by Kisazul
Feb 17 2019 10:30pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi! I've been riding a tsdz2 for a while now, with the open-source firmware. It works quite good, not as good as my former bosch performance but it works. I burned the 48v motor some times ago, I hope because of some water that could get in the motor (the cover was not totally waterproof because a ...
by Kisazul
Feb 14 2019 8:24pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Hello buba. I have a question. In which field can I see how much total energy was spent by the motor on my trip? I understand this data is recorded in the data energy field? Or in the battery field? I have already driven about 400 km on this motor with a new firmware, and I really like it! great job...
by Kisazul
Jan 20 2019 7:42pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Hi casainho and buba! One of the main problems in the TSDZ2 motor is cadence, which is greatly reduced with a drop in battery voltage. One solution is to use 11S or 12S batteries for 36V and 14S for 48 volts. I want to share my opinion and find out the possibility of implementing constant cadence, w...
by Kisazul
Jan 15 2019 3:39am
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Good luck in solving the issue, casainho! The power chart will be a very cool thing for this display!
by Kisazul
Jan 15 2019 1:53am
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

New stable flexible OpenSource firmware v0.17.0, get it here: https://github.com/OpenSource-EBike-firmware/TSDZ2-Smart-EBike/releases/tag/v0.17.0 Thanks to all the developers, testers and other contributors!! Changes from v0.16.x: KT-LCD3: - settable odometer - trip distance function - TM and TTM t...
by Kisazul
Jan 09 2019 6:37pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

hello, I had the same problem with the engine, the engine casing has cracked! What have you used to weld the case? Thank you Argon welding was used for the joint. Before that, I completely removed all the details: electronics, gears, motor. After welding, I collected everything, sealed it, processe...
by Kisazul
Dec 28 2018 12:05pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New

Daught wrote:
Dec 28 2018 9:01am
Nice work. How did yours break?
See pages 114, 113, 112 and maybe even earlier
by Kisazul
Dec 28 2018 6:12am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

I went back and I say your pics of the other cracked motor. I wonder what exactly causes the motor to crack. 1. In my case, the front non-drive side bottom bracket attachment ears hit the frame. I believe as the motor twists in the bottom bracket it causes the ear to push the motor out and ends up ...
by Kisazul
Dec 18 2018 6:41pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Here is the beta1 version for future v0.17.0. Please test and give feedback. On the next days I want to improve the wiki page for this version, as there are a lot of changes on the odometer field and they must be documented or users will not understand how to use it. Hi casainho. Will the new firmw...
by Kisazul
Dec 17 2018 6:57pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Okay, made it. The 36v factory setup doesn't work with 48v battery. (probably voltage is too high according to the preset and controller doesn't allow the motor to engage). Tested it with 36V battery. Very cool. Vitus Dee 29ER with Shimano nexus 3 speed hub (22 cog at the backwheel), 14,2ah 36v Wil...
by Kisazul
Dec 10 2018 1:18am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

jbalat wrote:
Dec 09 2018 10:38pm
Dude you could be right, I'm just using some cheap luggage scales.
Yes, 19 kg is more suitable for 26 full suspension. I have about the same characteristics, but at 29 and 14S5P GA. It weighs 21 kg.
https://m.pinkbike.com/product/norco/2009-Fluid-Two/
by Kisazul
Dec 09 2018 8:50pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

My reason for buying a 36v with 36v battery was to minimise weight. My dual suspension bike is only 17.5kg, my Trek Powerfly is more like 25kg and you can feel the difference. If you are running stock then the 48v motor has more power, my friend always rides in level 2 and to keep up I had to ride ...
by Kisazul
Nov 21 2018 8:08pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 2306
Views: 102558

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

I put 0.16 firmware with the throttle. and I have a comment. my choke only works on on - off (probably at full capacity). settings in 9 menu I see that the throttle pressing on different level changes also to the different level.
by Kisazul
Oct 04 2018 10:47pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "Lingbei MM28.250 torque sensor mid drive"
Replies: 297
Views: 28458

Re: New "Lingbei MM28.250 torque sensor mid drive"

Hi. I do not have a special key for loosening this nut. I took a thick flat screwdriver and unscrew it with a hammer counter-clockwise. P.s. But after it turns out to unscrew this tricky nut with the bearing, the shaft will not be able to remove. To extract it, it is necessary to remove the oil seal...
by Kisazul
Sep 24 2018 2:02am
Forum: E-Bike Non-hub Motor Drives
Topic: New "Lingbei MM28.250 torque sensor mid drive"
Replies: 297
Views: 28458

Re: New "Lingbei MM28.250 torque sensor mid drive"

Motor noise, less. Cadence, maybe a tad higher, about the same. Weight, a tad higher, not by much. Here is the new programming (48/52v) compatible with older model motors: https://drive.google.com/file/d/1FEvRvf9OQh_5-0Ku_YkmI6KHHRwCgvo8/view?usp=drivesdk Hi eyebyesickle. Do u have new programming ...
by Kisazul
Sep 06 2018 12:07am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Karolwi wrote:
Sep 05 2018 7:25am
Kisazul wrote:
Sep 04 2018 6:23pm
...Hi. Do u need 36 or 48 volt hex?
36volt
use it:
unpack the archive, there are 3 files:

PM - program memory
DM - data memory
OB - option bite
by Kisazul
Sep 04 2018 6:23pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Karolwi wrote:
Sep 04 2018 8:30am
Hi.
I am looking for the original firmware (.hex) TSDZ2 engine for the VLCD5 display with trottle, because I lost the copy of the original by uploading it "Open ... flexible .." which works only with KT-LCD3 and my engine can not be started.
Hi. Do u need 36 or 48 volt hex?
by Kisazul
Aug 31 2018 8:34am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Thanks guys mauri_78 and casainho, I figured out the connection. Next week I will install a new firmware.
by Kisazul
Aug 30 2018 7:48pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 4992
Views: 379085

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi casainho. I already had time to test the original firmware with a battery of 52 volts. About 500 km. Now I want to try with a new open firmware. I already had an LCD 3 from the old motor. I will use it. But I have a question, how to connect a throttle to LCD 3, which was going for with a set of T...
by Kisazul
Aug 18 2018 5:47am
Forum: E-Bike Non-hub Motor Drives
Topic: New "Lingbei MM28.250 torque sensor mid drive"
Replies: 297
Views: 28458

Re: New "Lingbei MM28.250 torque sensor mid drive"

Continue to believe in the nonsense that the manufacturers of the motor of lingbei write. But I want to remove noodles from your ears and show how people are being fooled. Above, it is written that the torque sensor can not stand on the axis, but on the clutch spindle. Well, I bothered to disassembl...
by Kisazul
Aug 16 2018 1:12am
Forum: E-Bike Non-hub Motor Drives
Topic: New "Lingbei MM28.250 torque sensor mid drive"
Replies: 297
Views: 28458

Re: New "Lingbei MM28.250 torque sensor mid drive"

Drum wrote:
Aug 16 2018 12:36am
...in the photo looking into the bore of the bearings there is a dark coloured component with a flat portion and what look like soldered connections: Do you know what that is?


I think it's a PAS sensor. Two magnets are mounted on the shaft and marked.