Search found 29 matches

by Nixunen
Sep 05 2020 3:05pm
Forum: E-Bike Technical
Topic: Need adaptive cruse control throttle.
Replies: 8
Views: 161

Re: Need adaptive cruse control throttle.

Nucular controller keeps your speed where you set it, it adds power to uphills so it maintain speed, and use regen to reduce speed in downhills etc (you can set that off, so it let bike speed increase on downhills if you want to) Yup, this is how mine works, but regen isn't enough if its a steep do...
by Nixunen
Sep 05 2020 2:37pm
Forum: E-Bike Technical
Topic: Need adaptive cruse control throttle.
Replies: 8
Views: 161

Re: Need adaptive cruse control throttle.

Nucular controller keeps your speed where you set it, it adds power to uphills so it maintain speed, and use regen to reduce speed in downhills etc (you can set that off, so it let bike speed increase on downhills if you want to) also it support to cruise speed + and - buttons, so you can adjust cru...
by Nixunen
Jun 29 2020 5:27pm
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1478
Views: 156299

Re: Nucular electronics - complete kit for ev! [beta]

I made my order at September 2019 (12F model) and i haven't received controller yet. And then estimate waiting time was 4 months
by Nixunen
Apr 13 2020 9:17am
Forum: Motor Technology
Topic: What lighting current from the KT controller?
Replies: 6
Views: 299

Re: What lighting current from the KT controller?

It is 100mA max, so 48v battery, 4.8W max. I use it only to power relay. And when using relay then you can use proper powers to lights. Thank you very much, i.e. poor lighting on 20mA diodes or control of some MOSFET (I don't like relays). Such information should be available in the user's manual. ...
by Nixunen
Apr 12 2020 3:12pm
Forum: Motor Technology
Topic: What lighting current from the KT controller?
Replies: 6
Views: 299

Re: What lighting current from the KT controller?

It is 100mA max, so 48v battery, 4.8W max. I use it only to power relay. And when using relay then you can use proper powers to lights.
by Nixunen
Apr 08 2020 1:27pm
Forum: E-Bike Technical
Topic: how to make a proportional / variable regen ebrake brake lever
Replies: 23
Views: 1147

Re: how to make a proportional regen ebrake lever

There is picture about that screw (before cutting down) also there is that hall sensor taped for testing. Bigger pictures if you click them. since the pictures do not show up for me (and probably for some others), and so they cannot be lost if the external site ever goes down, would you please atta...
by Nixunen
Apr 08 2020 6:16am
Forum: E-Bike Technical
Topic: how to make a proportional / variable regen ebrake brake lever
Replies: 23
Views: 1147

Re: how to make a proportional regen ebrake lever

Would it not be easier to use a hydralic brake handle, and mount a pressure sensor on it? So when you press the handle, the pressure goes to the sensor. The harder you press, the higher the output. I have not tested it yet, but I think it should give a natural feeling too. I dont know how high the ...
by Nixunen
Mar 18 2020 3:18pm
Forum: Items for Sale - New
Topic: Nucular electronics - complete kit for ev! [beta]
Replies: 1478
Views: 156299

Re: Nucular electronics - complete kit for ev! [beta]

briangv99 wrote:
Mar 12 2020 6:56pm
Hi VasiliSk,

is the next batch of 12F available soon? Lossing hope that I be able to get one of these after 6 months on the waiting list (pre-ordered 28/9/19).

Brian
I pre-ordered 12F + display 24.9.2019 and waiting still, just like you.
by Nixunen
Dec 02 2019 7:53am
Forum: E-Bike General Discussion
Topic: Circuit analysis of a cheap BMS, and why you shouldn't use one
Replies: 31
Views: 3339

Re: Circuit analysis of a cheap BMS, and why you shouldn't use one

Yeah, it is hard to find good pictures really close to ANT BMS. There is some picture, but it is quite bad too. You cannot see what components they used etc.

Image
by Nixunen
Sep 28 2019 6:26pm
Forum: Items Wanted
Topic: MXUS 3K Turbo (V3) Fatbike model
Replies: 1
Views: 795

MXUS 3K Turbo (V3) Fatbike model

Hi. Can anyone say where i can find some store or seller which sell MXUS 3K Turbo (V3) motor with 45mm wide stator and 5T turn count? Also important is that dropout spacing is 170/175mm, not that default 142mm which is easy to find. Store / seller can be all over world, but of course i prefer inside...
by Nixunen
Sep 03 2019 7:04pm
Forum: Items for Sale - New
Topic: Smartphone EV trip dashboard + NAV - Android/iOS - $119
Replies: 178
Views: 28150

Re: Smartphone EV trip dashboard + NAV - Android/iOS - $119

If i am understand correctly there is no pairing or any pin code etc when you connect your phone to controller bt ? So this allow anyone with Powervelocity app in their phone to connect your bike / controller and change settings, some of those can be quite hazard (like if you are use to have soft st...
by Nixunen
Jun 30 2019 1:39am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4179
Views: 401110

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Hi KT gurus Before I destroy another kt controller :( I thought I'd ask first this time!! The output on the controller that is at battery voltage, I'm assuming it is for lights. Is this regulated at all? Am I safe to chuck in any old led (rated for 6-60v) front and rear combo or do I have to worry ...
by Nixunen
Jun 22 2019 6:07pm
Forum: Motor Technology
Topic: Kunteng/BMSBattery/KT controllers - light output microcontroller pin and hardware differences?
Replies: 7
Views: 1474

Re: Kunteng/BMSBattery/KT controllers - light output microcontroller pin and hardware differences?

I have kt controller with light output. It gives out same voltage than your battery, but only about 100mA current, so i use this output to drive relay, and that relay is actually controlling my bike lights. There is one topic where is posted picture that little pcb which is installed kt controllers ...
by Nixunen
Jun 10 2019 2:38pm
Forum: Motor Technology
Topic: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app
Replies: 431
Views: 61087

Re: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app

EggRider also writes ttm, traveled distance and all this kind of values only when you power down display after ride. If don't remember doing that (like power down battery first) i loose all previous trip data's etc.
by Nixunen
Jun 03 2019 2:48pm
Forum: Motor Technology
Topic: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app
Replies: 431
Views: 61087

Re: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app

In eggrider there is clock like you see in this my picture (bottom left). There is also motor temp (79c), trip km (9km), wh left for battery (477wh), light and lock icon (when locked throttle, pas or motor not working, so no assist. I need to connect phone to display and lock opens and i can use bik...
by Nixunen
May 20 2019 12:00am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4179
Views: 401110

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

I use EggRider and yes it works with KT protocol. So i assume it can work also in this open source firmware ? Can i change assist levels, and settings (some c and p values?). EggRider uses just same settings than LCD3 display
by Nixunen
Jan 25 2019 12:20pm
Forum: Motor Technology
Topic: Controller for Eggrider W/ Hub motor? possible?
Replies: 4
Views: 729

Re: Controller for Eggrider W/ Hub motor? possible?

Kunteng controllers work fine with that motor and using Eggrider V2. I have this 40A controller, and almost same motor than you (i have 750w model, earlier i had 250w model and it work fine also. https://bmsbattery.com/ebike-kit/788-s12sh-800w-35a-torque-simulation-sine-wave-controller-ebike-kit.htm...
by Nixunen
Dec 31 2018 6:51am
Forum: E-Bike Non-hub Motor Drives
Topic: BBSHD advice before placing order
Replies: 7
Views: 1114

Re: BBSHD advice before placing order

You don't need programming cable, because you are planning to use Eggrider display. You can then make all programming using your phone, over bt connection.
by Nixunen
Dec 01 2018 7:50am
Forum: Vendor Relations Corner
Topic: CONHISMOTOR bad service
Replies: 6
Views: 1390

Re: CONHISMOTOR bad service

I contacted Aliexpress customer service, and they tell me that this kind of behavior is not acceptable and they send email to seller, ( i got copy of that email to my mail) but even after that seller doesn't have contact me anyway. Total radio silence. I also learn that CONHISMOTOR is same company w...
by Nixunen
Nov 28 2018 4:44pm
Forum: Vendor Relations Corner
Topic: CONHISMOTOR bad service
Replies: 6
Views: 1390

Re: CONHISMOTOR bad service

Yeah i am not worried about getting my money back. Only what bothers me is that this takes so mucht time and now my project have to wait first that month, to get money back, and then make new order somewhere else and wait at least couple of weeks or more, so this simple order turns easily about 2 mo...
by Nixunen
Nov 28 2018 4:31pm
Forum: Vendor Relations Corner
Topic: CONHISMOTOR bad service
Replies: 6
Views: 1390

Re: CONHISMOTOR bad service

I had the same thing happen to me with a different seller on Aliexpress when I tried to buy a lousy charger. He had no excuses and just added a fake tracking number when I asked. Of course, I canceled the order right after that. I can't be bothered to play games like that. I suggest you request a r...
by Nixunen
Nov 28 2018 4:11pm
Forum: Vendor Relations Corner
Topic: CONHISMOTOR bad service
Replies: 6
Views: 1390

CONHISMOTOR bad service

I bought new rear hub motor from CONHISMOTOR Official Store (Aliexpress seller) https://conhismotor.aliexpress.com/store/513166?spm=a2g1y.12024536.pcShopHead_8323762.0 And so far only thing that i got is bad service and direct lying from seller. Has anyone got any better experience from this seller ...