Search found 71 matches

by zappan
Jun 04 2020 5:17am
Forum: Motor Technology
Topic: BT Interface for TSDZ2 Open Source firmware - Work in progress
Replies: 39
Views: 3503

Re: BT Interface for TSDZ2 Open Source firmware - Work in progress

Hi Mspider65, I installed the new updates and everything works great! :D
by zappan
Jun 02 2020 2:59pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 145
Views: 15048

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

"by winwar84 » Jun 02 2020 5:36pm http://www.jobike.it/forum/topic.asp?TOPIC_ID=78456 the sensor is managed by the bluetooth card" Hello, it is possible but you have to install the TSDZ2-ESP32 card of the Mspider65 project, the discussion can also be found here: https://endless-sphere.com/forums/vie...
by zappan
May 29 2020 2:37pm
Forum: Motor Technology
Topic: BT Interface for TSDZ2 Open Source firmware - Work in progress
Replies: 39
Views: 3503

Re: BT Interface for TSDZ2 Open Source firmware - Work in progress

Hi, then yesterday I got the PCB that Mspider65 sent me which I thank for the great availability and courtesy, today, after identifying the corresponding colors of my controller compared to the standard ones found in the project wiki, I connected and installed with the help of my trusted mechanic th...
by zappan
Jan 14 2020 2:00pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 145
Views: 15048

Re: Tsdz2 open source firmware only for lcd03

Good, place the link where to find the latest stable version for the display LCD3 V0.20.0-beta.1 of Buba-Casainho

https://github.com/OpenSource-EBike-fir ... 0.0-beta.1
by zappan
Jan 12 2020 10:18am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

I have learnt that official Tong Sheng torque signal values are 50-105 when viewed using stock firmware on a VLCD5 display. I described how to access the service viewing menu in my previous post. I saw my previous post about the torque sensor range was quoted on Jobike. I tried registering there bu...
by zappan
Jan 12 2020 10:07am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 5893
Views: 400169

Re: TSDZ2 mid drive -- Flexible OpenSource firmware (Casainho code only) for TongSheng TSDZ2 mid drive motor

Hey guys been a while but just wanted to Share some findings regarding peddle cadence using the 36v motor with 10s and 14s battery in 36v and 36v experimental mode. Hi jalabat, very nice your test I already use the high cadence mode on the engine powered at 36 and I am very satisfied, I saw on your...
by zappan
Nov 28 2019 5:15am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

http://www.jobike.it/Public/data/mbrusa/20191126123735_modifica_mbrusa_XH18_VLCD5_6_TSDZ2_Controller_vM0.19.C_and_TSDZ2_Configurator_0.3.7.zip Why the hell you don't use github for publishing stable versions?! All users have to search all over the internet to find .zip files. Nobody knows which ver...
by zappan
Nov 27 2019 6:02am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

.......... If you use VCLD5 or VCLD6 it will not display the current value of the temperature sensor.......... There is always hope :) mbrusa is working on that (monitoring temperature, Voltage, Watt etc.) and has already a working trial for XH18 display, based on 0.19C-v3.7 of marcoq. For the mome...
by zappan
Nov 06 2019 5:30am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 5893
Views: 400169

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Hi Buba and welcome back :D , I'm using it and I didn't have any wonderful work problems, I noticed though that the LCD3 actually measures the battery voltage a little higher than that measured by my WattzUp instrument, a problem that was also reported from another user here: https://endless-sphere....
by zappan
Nov 06 2019 5:17am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

I just did some small bugfixes which should solve the walk assist and throttle problem. Sources are available here https://github.com/AckmaniacSoftware/TSDZ2-Smart-EBike-compatible-with-original-VlCD6-display Thank you very good work :bigthumb: , given your competence, if you like updates of Mbrusa...
by zappan
Nov 06 2019 5:08am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

.......... If you use VCLD5 or VCLD6 it will not display the current value of the temperature sensor.......... There is always hope :) mbrusa is working on that (monitoring temperature, Voltage, Watt etc.) and has already a working trial for XH18 display, based on 0.19C-v3.7 of marcoq. For the mome...
by zappan
Oct 28 2019 2:31am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hi I just install a new TSDZ2 750W 48V with VLCD5, with Ackmaniac firmware, all seems to be fine (thanks a lot Marocq and Ackmaniac) But and after 20km, no more assistance. I put factory firmware again and try, no assistance. But Walk assist is OK Throttle is OK On hidden menu, I find : RE is at 0 ...
by zappan
Oct 27 2019 9:32am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hello guys. I have solved some bugs recently found in my firmware and I will soon release a new version of the configurator [ver. 0.3.8] that will allow you to select my code or Ackmaniac's code by a checkbox. :thumb: Hello Marcoq, I look forward to trying it :D , but you have also updated to ver. ...
by zappan
Oct 27 2019 9:29am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 5893
Views: 400169

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Hi, I've updated to ver. 0.20.1 Beta and tested for a standard lap that I often do, I can say that having tried all the ver. starting from 0.07. this is the best, the response of EMTB is great, thanks Buba and congratulations.

:bigthumb:
by zappan
Sep 02 2019 6:39am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 5893
Views: 400169

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Just curious if someone has interest in starting this project: I was looking for other DIY mid drive motors that are more powerful and seems the Bafang BSSHD is the one, can take 52V 40A: 2000 Watts which is more than double of TSDZ2. This motor has no torque sensor but a DIY torque sensor can be a...
by zappan
Jul 12 2019 6:23am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Brobro you must load Marcoq's SW only on the motor.
by zappan
Jul 12 2019 2:42am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hi Marcoq, why should it not work? I believe that the SW of the TSDZ2 is the same I think they have only adapted the connections ... of course the keys to configure the options may not match, Wpenner since you have the opportunity to test why you do not install it and so we check how it was done for...
by zappan
Jul 08 2019 7:11am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

ok Demion thanks, then it's similar to the SW of Marcoq.
by zappan
Jul 08 2019 3:27am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hi. I also made fork with VLCD5 / VLCD6 / no display support. Based on OpenSource-EBike-firmware/TSDZ2-Smart-EBike v0.19.0 and marcoq vlcd display protocol code, no other changes. All configs are in config.h . Need to configure manually and compile by yourself. https://github.com/Demion/TSDZ2-Smart...
by zappan
Jul 02 2019 6:40am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

The user Ashrambo has a very interesting blog about how to install and configure the Marcoq SW:
https://ashthinkings.blogspot.com/
Also on the Italian forum you will find something prepared by the user Bic3r:
http://www.jobike.it/forum/topic.asp?TOPIC_ID=77830
Good job.
by zappan
Jul 02 2019 5:57am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Can someone please provide a basic step by step guide of how to flash the motor with Marcoq's firmware? Hello, I report, translated with google, a guide to programming some time ago taken from a post by Marcoq: "how to use the Configurator in Java. First of all, what is needed: - Install JRE runtim...
by zappan
Jun 21 2019 2:40am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hi, in the Italian forum the Beta vMO 0.18.I version and the related Java v configurator have been released. 3.5 of Marcoq, among other things the EMTB function is implemented, a gem that is not present in Casainho's Opensurce SW. :D Hi. For a few days I am looking for a java configurator v.3.5 Can...
by zappan
Jun 20 2019 5:17am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1289
Views: 125681

Re: Tsdz2 firmware open source adapted to vlcd5

Hi Sergio1990, the Marcoq code already provides for the elimination of backward resistance using the "Backwards Res. Off" option and works well confirmed by many users. Keep in mind that the latest version of Marcoq can use Casainho's SW 0.19.08 which has also eliminated backward resistance.