Search found 220 matches

by thineight
Feb 14 2020 2:28am
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

I just ordered a TSDZ2 from PSWPower and i made a mistake. I ordered the XH18 display with no ebrakes. The motor came with a 6-pin connector and i have the cable in the attached picture with a 850C display to get OSF working with brake sensors and temp sensor. Can it be done? Or should i order anot...
by thineight
Feb 10 2020 2:34am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6602
Views: 658479

Re: New "TSDZ2 Torque Sensor Central Motor"

Does anyone know where i can buy a 52v battery in the EU? I have TSDZ2 with OSF running 48v and i want to upgrade to 52V and leave the 48V battery for my wife's bike, which will is also getting a TSDZ2 with OSF. Should i upgrade to the 850C? Is it worth the cost? I'm on KT-LCD3 for 1 year and 2000k...
by thineight
Feb 09 2020 3:41pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

In the V20 you have to activate the cruise function in the setup screen, I think it’s default is off in the initial setup. Of course it is activated. The relevant submenu 0 has value 1. Do you confirm that after you press DOWN for a second or so your cruise starts working? Yes my cruise works. Beta...
by thineight
Feb 09 2020 12:33pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Waynemarlow wrote:
Feb 09 2020 10:40am
In the V20 you have to activate the cruise function in the setup screen, I think it’s default is off in the initial setup.
Of course it is activated. The relevant submenu 0 has value 1.
Do you confirm that after you press DOWN for a second or so your cruise starts working?
by thineight
Feb 09 2020 7:58am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Hello, quick question on v.20 beta1 (buba) + LCD3 display. Is the cruise working on your bike? This is a function I practically never use, but I remember during the debug of buba's alfa versions the cruise was working just pressing the DOWN button while the bike is 10+ km/h, in that case the bike wa...
by thineight
Jan 23 2020 12:16pm
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Download here: https://github.com/OpenSource-EBike-firmware/Color_LCD/releases/tag/850C_v0.6.4 Casainho, which motor controller firmware needs to be used with this display firmware? I'm a bit lost and I do not find the latest motor firmware source code.. other than v.19 and v.20beta1(Buba?). Thanks
by thineight
Jan 22 2020 2:41am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Did you see that Ackmaniac did something to take into account the cadence for less overrun Maybe have a look at that and see if its also worth incorporating I similarly modified his fork and was running that as my go-to version for a while and it helped a lot. However, I think I've diagnosed the ov...
by thineight
Jan 22 2020 2:36am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6602
Views: 658479

Re: New "TSDZ2 Torque Sensor Central Motor"

The new firmware with the human and motor watt showed is a cool feature for learning. Thanks @Casainho and co. for all the work done. I calibrated my torque sensor with fw 0.6.2. However I sometime encountered issues while testing with the new calibration enabled (superman watt, and motor behaviour...
by thineight
Jan 19 2020 6:17pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Following on from a few posts back, has anyone done the cadence sensor calibration and tried running advanced cadence mode? I have but no idea what it actually did. Maybe faster to respond to stop/start? Yes the intention behind that calibration was to instruct the motor to recognize also the "vall...
by thineight
Jan 17 2020 6:12pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 47
Views: 3726

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Ciao Andrea and guys. I think this thread should be named "for LCD3" without mention the release 19 or 20beta, because to date we have the .20 as latest stable release (anyone still on v19? Don't think so), but tomorrow it may be v.21. The only true reason we are here on this thread is that we do no...
by thineight
Jan 17 2020 3:19pm
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware (Casainho code only) for TongSheng TSDZ2 mid drive motor

I don't understand. The latest version is not V19 anymore, is version V53 and is much better. I think V053 is much better than V20. But please make a list, after testing and comparing each feature, give details and prioritize the items on the list, then I can see what I can bring from the V20, if a...
by thineight
Jan 16 2020 11:15am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

Hi Andrea_104 I wonder if you could add links to the latest Marco firmware and configurator in your first post.. From what I can tell the configurator is at version 3.7 and the firmware is 19c and there is also a 19c version from ackmaniak ? Anyway would be nice to have some links if you get the ti...
by thineight
Jan 11 2020 5:36pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

I have learnt that official Tong Sheng torque signal values are 50-105 when viewed using stock firmware on a VLCD5 display. I described how to access the service viewing menu in my previous post. I saw my previous post about the torque sensor range was quoted on Jobike. I tried registering there bu...
by thineight
Jan 11 2020 4:46am
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Are the magnetic brake sensors for hydraulic brakes just one big closed circuit that opens when a lever is pulled (wired in series)? Or are they an open circuit that is closed by either lever (wired in parallel)? Brake sensors circuit is open by default (no brake sensors or no lever pressed). It cl...
by thineight
Jan 08 2020 6:01pm
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware (Casainho code only) for TongSheng TSDZ2 mid drive motor

I mean share the calibration graph and the experience with the full calibration linearization. Ah, no one there is using the 850c display yet, so no experience with the linearization. Some are using the original displays (marcoq) and some others the lcd3. But the problem of the drift is physical an...
by thineight
Jan 08 2020 5:32pm
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware (Casainho code only) for TongSheng TSDZ2 mid drive motor

I am still learning and testing. I hope others can share results so we all can learn. Ok, couple of users here reported their values after the calibration.. and after some km. http://www.jobike.it/forum/topic.asp?TOPIC_ID=76426&whichpage=58 It's noticeable a trend for the minimum to increase over t...
by thineight
Jan 07 2020 6:08pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

Is it not possible to flash TDSZ2_Controller_vM0.19.C.hex file using STVP? Once again, each hex files from marcoq and its branches (i.e. for original displays) includes the settings for the specific user. You need to compile your own hex.. or obtain a hex files with the same settings you need for y...
by thineight
Jan 07 2020 5:35pm
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware (Casainho code only) for TongSheng TSDZ2 mid drive motor

Thanks, I'll give it a try with version 20. If cadence and torque are both working OK, can you think of any other reasons why it would not be giving any power? Do I need a new motor controller? As I told, newest firmware version has improvements on the torque sensor code, you should first try it. C...
by thineight
Jan 06 2020 10:16am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6602
Views: 658479

Re: New "TSDZ2 Torque Sensor Central Motor"

Has anyone found a way of holding the 3 small springs beneath the Torque Sensor in place whilst putting the shaft back into position, I seem to jostle the springs enough when lightly hammering the shaft back to dislodge the springs. You can put three hints of grease on spring location.. it is stick...
by thineight
Jan 06 2020 7:49am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6602
Views: 658479

Re: New "TSDZ2 Torque Sensor Central Motor"

Hiya guys, I've been using the TDSZ2 for about 5 months now for my daily commute, and did about 4300 kms so far. Unfortunately today I ran into some trouble: after occasional resistance when pedaling (the crank would jam every few turns, especially when slowing down), it eventually got stuck. Now i...
by thineight
Jan 06 2020 5:16am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

Stancecoke, Just for my understanding, what is the intent of this "revised" configurator?
Having all the parameters in a text file ready to edit instead of embedded in a Java tool?

Many thanks :wink:
by thineight
Dec 30 2019 5:32am
Forum: Motor Technology
Topic: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4542
Views: 310671

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

My notes: 1. One torque sensor is kind of linear only up to 15 kgs while other up to 45 kgs. The rate/sensitivity are the same for both on this "linear" zone but clearly mine lacks resolution because this zone is very short. I can do peaks of 40 or 60 kgs on my pedals without taking my but from the...
by thineight
Dec 29 2019 9:17am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

I think we are all interested in the best development of TSDZ2 original displays with OSF, therefore I want to thank marcoq for the configurator and all the other programmers that made the porting possible. I think the best way forward is to focus the work on the buba's v0.20, which is to date the m...
by thineight
Dec 28 2019 5:12pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 805
Views: 78946

Re: Tsdz2 firmware open source adapted to vlcd5

The problem is the Java gui, that is under control of marcoq. I added the java source to my repo: https://github.com/stancecoke/TSDZ2-Smart-EBike-compatible-with-original-VlCD6-display/blob/master/TSDZ2_Controller_vM0.19.C_and_TSDZ2_Configurator_0.3.7_con_codice_0.19_Stable/tools/OSEC.java Eclipse ...