Search found 20 matches

by adam B
Oct 11 2019 9:33am
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 3873
Views: 192105

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Any ideas? Is there a way to test the motor to figure if that is the problem? https://uploads.tapatalk-cdn.com/20191009/ef4fc80f2d13ac75d3b96cbd45fb722e.jpg Sent from my iPhone using Tapatalk Double check if one of the 2 thin wires of the torque sensor coming from the other side is broken. Long ago...
by adam B
Oct 09 2019 5:22pm
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 3873
Views: 192105

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

Hi I am running 19.0. I had to take the motor apart due to a cracked case(long story) When I put everything back together the motor won’t start and error 1 is flashing. I pulled the motor and controller out (as in my picture so there is no resistance again the motor) and when I apply power from the ...
by adam B
Sep 07 2019 9:26am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

I just fitted a new controller as I thought my non responding motor was a controller issue. I tried with open source on lcd3 and stock firmware on standard monitor still no joy. How can I raw test my bare motor to see if it’s dead? https://uploads.tapatalk-cdn.com/20190907/6bb04242a17c9d03e0dd9ad37...
by adam B
Sep 06 2019 7:11pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

I just fitted a new controller as I thought my non responding motor was a controller issue. I tried with open source on lcd3 and stock firmware on standard monitor still no joy. How can I raw test my bare motor to see if it’s dead? https://uploads.tapatalk-cdn.com/20190907/6bb04242a17c9d03e0dd9ad37c...
by adam B
Jul 02 2019 7:12am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

Does anyone no why all the 52v controllers are out of stock everywhere??


Sent from my iPhone using Tapatalk
by adam B
Jun 30 2019 11:46am
Forum: Motor Technology
Topic: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor
Replies: 3873
Views: 192105

Re: TSDZ2 mid drive -- Flexible OpenSource firmware for TongSheng TSDZ2 mid drive motor

How would one install 3 wire(white red black) throttle to v19 kt lcd3 8 wire setup? Do we connect to the Green White and Orange wires left from display install ( if so what order) or to connect directly to the display( if so where do we attach to?) If this has already been addressed I’m sorry! Sent ...
by adam B
Jun 28 2019 5:54pm
Forum: E-Bike Technical
Topic: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3
Replies: 105
Views: 10780

Re: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3

Só I would say the motor controller is dead. Looks like it!! Where do you recommend getting a replacement (Uk)? Thanks so much for helping! And your great work. Sent from my iPhone using Tapatalk I buy from PSWPower, I don't know others. Thanks I’ll report when I have re installed! Sent from my iPh...
by adam B
Jun 28 2019 5:46pm
Forum: E-Bike Technical
Topic: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3
Replies: 105
Views: 10780

Re: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3

casainho wrote:Só I would say the motor controller is dead.
Looks like it!!
Where do you recommend getting a replacement (Uk)?
Thanks so much for helping! And your great work.


Sent from my iPhone using Tapatalk
by adam B
Jun 28 2019 4:28pm
Forum: E-Bike Technical
Topic: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3
Replies: 105
Views: 10780

Re: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3

All the functionality is working on the display including battery level and speed sensor is working. No power of movement from the motor. I would love to hear your thoughts and experiences! Also how to wire the throttle into this system. See on LCD3 if you get the correct information for torque sen...
by adam B
Jun 28 2019 10:11am
Forum: E-Bike Technical
Topic: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3
Replies: 105
Views: 10780

Re: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3

All the functionality is working on the display including battery level and speed sensor is working. No power of movement from the motor. I would love to hear your thoughts and experiences! Also how to wire the throttle into this system. See on LCD3 if you get the correct information for torque sen...
by adam B
Jun 28 2019 9:58am
Forum: E-Bike Technical
Topic: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3
Replies: 105
Views: 10780

Re: KT LCD3 firmware -- Flexible OpenSource firmware for Kunteng KT-LCD3

Hi tsdz2 crew I had standard display and software. I have a 750w motor 52v 17.5 ah About 1600 km I have a problem I have no power to my motor. I was tightening the bottom bracket and (stupidly) compressed the battery wires ( possibly)as they WERE between the chain wheel side and frame. Could this cr...
by adam B
May 15 2019 2:43am
Forum: E-Bike Non-hub Motor Drives
Topic: My Bafang Ultra Mountain Bike! Frey AM1000
Replies: 1664
Views: 171540

Re: My Bafang Ultra Mountain Bike! Frey AM1000

Not a Frey but I thought you guys might like to see! https://uploads.tapatalk-cdn.com/20190515/cfe78b10c403d79ea82b3d615b323b47.jpg https://uploads.tapatalk-cdn.com/20190515/33f87198fa53d753617d23ffbd668237.jpg https://uploads.tapatalk-cdn.com/20190515/1003807f99366c5f73eb30b1df7a219f.jpg Sent from ...
by adam B
Feb 03 2019 5:02am
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 228
Views: 18045

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

Image
Just got my frame from Riesen g510


Sent from my iPhone using Tapatalk
by adam B
Feb 03 2019 4:53am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

Ok but I guess there is a weight trade off?
I’m new at this! So if I got a 52v 11ah or 13ah battery ( GAcells) it would have the same power, just less distance therefore needing to be charged more regularly?
Thanks for the education!!


Sent from my iPhone using Tapatalk
by adam B
Feb 03 2019 3:23am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

Rydon wrote:
adam B wrote:
Feb 03 2019 1:53am
Thanks Roydon
Would 52v 17ah be overkill with the GA cells?
Not if you want TSDZ2 for your entire century ride! :)
??


Sent from my iPhone using Tapatalk
by adam B
Feb 03 2019 1:53am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

Thanks Roydon
Would 52v 17ah be overkill with the GA cells?
by adam B
Feb 02 2019 9:39am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

So Then what is the ultimate 52v Battery with open source software for my 52v 750w tsdz2?
I am currently running 52v 14ah samsung 30q (I will soon put this on my bafang ultra g510)and want to get the ultimate for my tsdz2.
by adam B
Dec 21 2018 6:12pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

:bigthumb: awesome and thank you!!
by adam B
Dec 21 2018 4:33pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 5926
Views: 495576

Re: New "TSDZ2 Torque Sensor Central Motor"

Quick question for which I haven't been able to find the answer to.
Do I need to buy a 60v LCD3 if I have a 750 w 52v controller and a 52v 15ah Battery?
Thanks in advance...