Endless Sphere

And I did saw your video and I known because I did the development that the latest version of 0.51.0 has improvements on the issues you did show in the video. So my suggestion to everyone is to update to the latest version. Hi Casainho, I have been trying to keep up too.. as you know I have the KT ...

casainho wrote: ↑

Oct 15 2019 7:01am

Can you help to improve the wiki with this information?

Yes I will try.

I have just flashed 850C_v0.4.2-bootloader.bin with home made bootloader box successfully and display turns on however the vertical screen flip is still present. Also seems that I cannot flash it anymore as the display is not reacting to flashing signals from USBUART module as before. Is there a ch...

I have just flashed 850C_v0.4.2-bootloader.bin with home made bootloader box successfully and display turns on however the vertical screen flip is still present. Also seems that I cannot flash it anymore as the display is not reacting to flashing signals from USBUART module as before. Is there a ch...

Help needed: I have installed the OpenSource firmware without problems on my TSDZ2 (0.19.0). But I didn‘t succeed to install the firmware on the 850C using the USB to UART cable method (anybody successful yet?) so I bought the bootloader from Eco Cycles. Arrived today and it worked perfectly well. ...

I have just flashed 850C_v0.4.2-bootloader.bin with home made bootloader box successfully and display turns on however the vertical screen flip is still present. Also seems that I cannot flash it anymore as the display is not reacting to flashing signals from USBUART module as before. Is there a cha...

Help needed: I have installed the OpenSource firmware without problems on my TSDZ2 (0.19.0). But I didn‘t succeed to install the firmware on the 850C using the USB to UART cable method (anybody successful yet?) ... Any ideas? I have built a number of these 850c bootloaders over the last few years. ...

Beta1 I found backward resistance that kicks in when moving bike faster backwards. At low speed there is no any resistance. Also had feeling that motor stops much quicker than on alfa UPDATE: today did another ride without any backward resistance.. this could be very uniq case or upcoming HW issue..?

I bet you didn't buy the 850C from the links refered on the wiki. We should have a stable release to solve your issue very soon. The developers already found a solution, they are just finishing the thing. Maybe in 1 or 2 days there will the the new firmware release. I would be happy if this was the...

Also while selecting 7.1 or 7.2 submenu ( average and max speed) the symbols AVG and MAX are not visible on display. Symbols are visible just once the submenu is selected. Can you confirm this? Will do some testing tomorrow but was notified it worked. When 7.1 or 7.2 digits are flashing (selecting ...

Alfa10
The MAX speed (submenu 7.2) not showing correct values. When riding 30km/h the values bounce from 3 to 14km/h

Also while selecting 7.1 or 7.2 submenu ( average and max speed) the symbols AVG and MAX are not visible on display. Symbols are visible just once the submenu is selected.

Let me share simple and effective heat management improvement for the tsdz2 with silicone thermal conductive pads I cut pads to half to make them thinner and stick them to motor with double side adhesive heat conductive tape. Have tested it whole summer and it works really well I was able to keep mo...

Note that converter must be 3.3V. With bootloader box the 3.3V pin is not used. The UART chip is powered via the main source of power 27V or more. In the case of flashing firmware on the TSDZ2, users report errors and the solution is to use very short cables... Maybe you can try another converter. ...

Note that converter must be 3.3V. With bootloader box the 3.3V pin is not used. The UART chip is powered via the main source of power 27V or more. In the case of flashing firmware on the TSDZ2, users report errors and the solution is to use very short cables... Maybe you can try another converter. ...

Has anyone tried with success to flash 850C display with home made boot-loader (USBtoUART) ? In my case flashing starts fine data is transmitted but it gets interrupted and I could not get beyond 40%. Really strange that each time it fails with different percentage. I was trying different power sour...

Call me impatient but what is the ETA for the official 0.20 Beta ?
Correct me if I am wrong but this is important milestone for Qmarco to start working on his implementation for original displays and as well for Casainho to start with 850C/SW102 firmware versions for 0.20..

Do you mean that it should use the assist level just before eMTB? That could be possible to fix but I am afraid that some users have really high values and could get surprised if accidentally on eMTB and enabling Walk Assist. I understand the inconvenience you are trying to solve though! EDIT: Have...

Have just a few points for the A9 finetune: Odometer field 7:2,3 While setting average or peak speed in Odometer Field the AVG and MAX indication is shown in Wheel Speed Field and desired speed is shown in both fields (Odometer and Speed). However there is bug when AVG/MAX indication disappears aft...

Have just a few points for the A9 finetune: Odometer field 7:2,3 While setting average or peak speed in Odometer Field the AVG and MAX indication is shown in Wheel Speed Field and desired speed is shown in both fields (Odometer and Speed). However there is bug when AVG/MAX indication disappears afte...

Clarification: If anyone likes how the eMTB mode works it is very similar to Torque Assist so give Torque Assist a try! If we had a sensitivity of zero on eMTB it would be just like Torque Assist and just a linear function. So if Torque Assist is setup properly the transition to eMTB will be comple...

and other thing i would know ; is t possible to choose the desired level to use with eMTB ? Using LCD with five assists levels, if i could choose the 3 lvl to use eMTB on it , i ll be happy Great to hear! :) You can change the sensitivity from the display, here is the wiki if you want to take a loo...

and other thing i would know ; is t possible to choose the desired level to use with eMTB ? Using LCD with five assists levels, if i could choose the 3 lvl to use eMTB on it , i ll be happy Great to hear! :) You can change the sensitivity from the display, here is the wiki if you want to take a loo...

48V high cadence mode - (menu 0:3: value 2 ) is not working for me, the engine stops above 500 ERPS as it would do with normal 48V mode. I did memory cleanup by writing zeros (even it is not needed in alfa2 where the EPROM issues is already solved) so that should not be the case. Sad to hear that! ...

I have just finished my first ride with 0.20.0 alfa2 and have following points : 48V high cadence mode - (menu 0:3: value 2 ) is not working for me, the engine stops above 500 ERPS as it would do with normal 48V mode. I did memory cleanup by writing zeros (even it is not needed in alfa2 where the EP...

I got working the quick selection of variables to show on the graph: on the main screen, we need to click + long click on ON/OFF button and the graph title blinks, then we can select another variable by using UP and DOWN buttons. Then we leave this mode by long click on ON/OFF button. Other than th...