Endless Sphere

################################################# # # # Windows Standalone SW102 Full Installer # # # ################################################# . . (e)xit / (t)est connection / (f)lash sw102-full-0.19.11 (1).hex : t GNU MCU Eclipse OpenOCD, 32-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad8...

some more

some pictures I did with my soldering microscope while I was breaking my sw102 sadly lifted the pad and now it wont do a thing odd though as I was only at 270 on my soldering station.might try magnet wire on the trace

I had the bbshd on a voodoo bike previous to this but the frame snapped at the top tube. I spent about a week searching online trying to find the ideal bike for the bbshd 68mm, this one was on sale at chain reaction for £2000 and although my budget was 500 I thought I would go for it :lol: :lol: If...

all sorted thank you. yes the tx rx was the wrong way around.

I had the bbshd on a voodoo bike previous to this but the frame snapped at the top tube. I spent about a week searching online trying to find the ideal bike for the bbshd 68mm, this one was on sale at chain reaction for £2000 and although my budget was 500 I thought I would go for it :lol: :lol: If ...

I am getting error 30 with this wiring broke my Higo connector trying to wire directly. question is does tx go to rx or do they stay the same.

got more controller photos here hopefully they can help someone. https://photos.app.goo.gl/c1CuJYxQWtK27Z5J7 Thanks, those are very good detailed photos!! if you would like dimensions of the board to hopefully one day jlcpcb a fella with the vesc implemented. would love to say i can do that but its...

got more controller photos here hopefully they can help someone.

https://photos.app.goo.gl/c1CuJYxQWtK27Z5J7

i think its an nec chip i know they make micro controllers

hope these are ok no filter for my scope

quick one could anyone reference old photos and tell me the orientation and value of these 2 components please. the board was already broken so rushed unpotting it but i am going to try save it as a spare. thankyou in advance

it works perfect for the job had the issue now i dont

this is my cable works for this firmware fix just posting this to help anyone that needs tips on a quick easy programming cable could be done with no soldering iron or heat shrink. video link usb cable:[youtube]https://youtu.be/gdmv0JjRdL4[/youtube] uk ebay : https://www.ebay.co.uk/itm/CH340-Gold-US...

got it working 3 n4004 diodes in series on the screen

had the same thing as the post up from me its a thing happening a lot lately my seller just said buy a 48v battery but thats not an option got some spare n4004 here i will give it a shot. sick of draining my battery on a light bulb. thankyou for the post.

Here's the latest firmware for the BBSHD btw. that fixes the overvolt error: https://i.botox.bz/CRR10E5228E1050221_190418.bin Edit: Okay, I just tried with the Bafang BESST Software and a CP2102 UART Dongle and wasn't able to get any response from the motor, the BafangConfigTool works fine but BESS...

I suppose there's a chance that it's just programmed for a 48v battery and you could fix it with a programming cable and the software. You might try to find someone in your area that has one you can borrow. I don't know how to tell the pack voltage programming without the cable. If you put diodes i...

its about a week old do i need one of them besst connectors for that? if that's the case then its getting 2 diodes haha thank you for helpful responses its took me 2 days to find some genuine people

Anyone know how to sort this out what resistor i need to change. passed from pillar to post someone saying firmware and someone else saying new controller. it stops showing error 07 at about 57.5v but it winds me up having to drain my battery to that every time. tried asking luna and there was a wal...

i found a post from 4 weeks ago on reddit about some bad controllers that went out from bafang. turns out a firmware update solves this. unsure how but i have spent my day trying to find this new firmware to no prevail. my issue is not to overvolt the controller but to just have it work. i know luna...

Thank you for the quick reply well that issue annoying haha. Is there not a resistor value s can change somewhere in order to fool the controller or even reprogramming myself. As I have already bought the charger and bms. Any help appreciated.

Built a bike to get me to and from work. I built my battery pack from scratch and used Samsung 30q cells 4.2 fully charged. When using it after charging I got error 06 but I was under the assumption that the Controller and screen were rated to 60. The display is reading 58.6v but no power to anythin...