Search found 12 matches

by theblindsaint
Mar 30 2020 4:13am
Forum: E-Bike Technical
Topic: Help diagnosing battery not turning off
Replies: 5
Views: 190

Re: Help diagnosing battery not turning off

The only other issue I've had with my e-bike was that sometimes the motor would not respond unless I turned the bike off and on again. Then one day when I tried turning off the battery it wasn't able to, and it has been that way ever since. What would be my best course of action at this point?
by theblindsaint
Mar 30 2020 12:06am
Forum: E-Bike Technical
Topic: Help diagnosing battery not turning off
Replies: 5
Views: 190

Re: Help diagnosing battery not turning off

Are the images working now? Which part of the battery would be the fets, and how should I check it to be sure?
by theblindsaint
Mar 24 2020 10:53pm
Forum: E-Bike Technical
Topic: Help diagnosing battery not turning off
Replies: 5
Views: 190

Help diagnosing battery not turning off

I'm running into an issue where my battery will not turn off when I flip the switch while attached to the bike. However when I pull the battery off, open it up, and probe the switch itself, the switch seems to be correctly breaking and connecting the current. Now I'm stumped as to what could be caus...
by theblindsaint
Aug 18 2019 7:28pm
Forum: Items for Sale - New
Topic: Compact Field Oriented Controller, ASI + Grin, limited run
Replies: 1266
Views: 266621

Re: Compact Field Oriented Controller, ASI + Grin, limited run

I've tried changing the field weakening current, but am not seeing any increase to either top no load speed or no-load draw (aounrd 1 A even at >50%). I have a baserunner, and was wondering why it seems like the FOC setting isn;t registering?
by theblindsaint
Aug 06 2019 10:52am
Forum: Items for Sale - New
Topic: Compact Field Oriented Controller, ASI + Grin, limited run
Replies: 1266
Views: 266621

Re: Compact Field Oriented Controller, ASI + Grin, limited run

Hi, I just got a baserunner installed on my bike, and have a few questions about how to set up it up optimally. My bike set up is a 52 v battery running a 1kw DD drive. How do I determine what the max flux amps should be? Some settings in the controller software overlap with the CA3, which one will ...
by theblindsaint
Jul 30 2019 8:49pm
Forum: E-Bike Technical
Topic: Help with Cycle Analyst and motor
Replies: 0
Views: 308

Help with Cycle Analyst and motor

I'm halfway through a conversion of my bike, finally have all the mechanical issues sorted out and just installed a baserunner+CA3 combo when I'm running into a few problems. First issue is when I plug in just the 3 motor phase wires to test the motor. No matter which combination for the wires I use...
by theblindsaint
Jun 23 2019 5:06pm
Forum: E-Bike General Discussion
Topic: How to convert anderson plugs to Higo plugs?
Replies: 10
Views: 962

Re: How to convert anderson plugs to Higo plugs?

Hi, thanks for the reply. So I'm assuming its advised to do swap out the anderson for HiGO? Also, for the diagram on the left, is that the diagram for the male or female? Finally, as the motor I have I'm not sure if it follow industry standard, is there a way to test which hall wire is which?
by theblindsaint
Jun 23 2019 9:16am
Forum: E-Bike General Discussion
Topic: How to convert anderson plugs to Higo plugs?
Replies: 10
Views: 962

How to convert anderson plugs to Higo plugs?

Hi all, the controller (baserunner) I want to use has HiGo plugs and the motor (1kw) has anderson plugs. Which one should be preferable, and what would be the procedure to convert one type of plug to the other? I do have basic soldering skills, but I was curious aside from the basic checking the rig...
by theblindsaint
Jun 20 2019 11:37pm
Forum: E-Bike General Discussion
Topic: Half way through a conversion, need help finishing it
Replies: 16
Views: 914

Re: Half way through a conversion, need help finishing it

I am also not exactly sure which controller suits me best, though these seem to be in the rough ballpark? 1. https://www.ebikes.ca/shop/electric-bicycle-parts/controllers/c7240-gr.html# 2. https://www.ebikes.ca/shop/electric-bicycle-parts/controllers/c4835-gr.html# 3. https://em3ev.com/shop/12-fet-...
by theblindsaint
Jun 20 2019 12:40pm
Forum: E-Bike General Discussion
Topic: Half way through a conversion, need help finishing it
Replies: 16
Views: 914

Re: Half way through a conversion, need help finishing it

After my last post and a little bit more researching, I've a more solid idea on how to progress, but still have some more questions. My goal is to cruise around 30~40 km/h, with a range of roughly 20km (messed up the unit conversion s last time). I'm also interested in regen breaking ability, and Cy...
by theblindsaint
Jun 11 2019 3:29pm
Forum: E-Bike General Discussion
Topic: Half way through a conversion, need help finishing it
Replies: 16
Views: 914

Re: Half way through a conversion, need help finishing it

Hi, thanks for the really detailed response. What other kits would you suggest then? I was actually sort of prepared to have to upgrade/replace most of the electronics. My current goal is a bike that can go roughly around 30~40 mph, with a range of 7~10 miles. The area I'm at is completely flat. Tak...
by theblindsaint
Jun 11 2019 12:22pm
Forum: E-Bike General Discussion
Topic: Half way through a conversion, need help finishing it
Replies: 16
Views: 914

Half way through a conversion, need help finishing it

I'm in the process of converting a bike with this kit and have a few questions I hope to get help with https://www.amazon.com/gp/product/B079T25XCN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 1. Is there a recommendation for twist throttles that are slim enough that they wont completely jam...