Search found 478 matches

by Elinx
May 06 2021 5:28am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Eoinywoney wrote:
May 06 2021 1:53am
.. I ignored the decimal point.
No, you didn't ignored the point, because you use the value before that point :)
If default settings work for you, than it can't be hardware.
Eoinywoney wrote:
May 06 2021 1:53am
..... it must be frustrating .....
If it was frustrating I didn't answer. Also I too have been a starter with OSF once.
by Elinx
May 05 2021 6:01pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

.... My torque values are min 17 and max 27 .... if I flash these settings the motor won't start at all. It runs again after reverting back to my original settings. Is my torque sensor broken? .... .... I didn't back up the FFW, can the FFW be flashed back to the motor? You must read all 3 digits, ...
by Elinx
May 05 2021 2:41pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I will only copy original firmware and then copy firmware v20.1C with JavaConfigurator.jar .... If you use the Java configurator, then the bat script will setup STVP ......X6 with a cmd command, so you don't need to setup STVP yourself. So no worries about that setting. "STVP_CmdLine -BoardNam...
by Elinx
May 05 2021 1:21pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Akita wrote:
May 05 2021 11:03am
Setting configuration STVP
....
Which is right?
For flashing stock FW .....X4 (also for the backup of the stock FW)
For flashing OSF ......X6

Main OSF wiki
OSF Wiki for stock display
by Elinx
May 05 2021 10:19am
Forum: Motor Technology
Topic: Tongsheng vlcd6
Replies: 1
Views: 45

Re: Tongsheng vlcd6

What are my option with this vlcd6 display as to change firmware,... This one or that one The first one is imho the easiest to do. Configurate the OSF as you want, flash the controller with ST V2 link and go. For the second one you have to add a bluetooth module, but you can configurate options wit...
by Elinx
May 04 2021 4:56pm
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

beemac wrote:
May 04 2021 2:39pm
..... on the drive side only I replaced the original seal with the enduro bearing... ..
It was a bit confusing for me, because of the link to that seal, but at last it is clear to me now. :thumb:
by Elinx
May 04 2021 11:00am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

beemac wrote:
May 04 2021 10:53am
... drive side - replacing the rubber seal in the centre of the spider. ..
OK, so no extra bearings... :)
by Elinx
May 04 2021 10:47am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

beemac wrote:
May 04 2021 10:35am
....bit of silicone around the ID/OD to seal it in place .....
I understand you have placed an extra bearing in the space behind the seal on the non drive side.
So no further need for sealing with no outer bearing.
by Elinx
May 04 2021 9:28am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Akita wrote:
May 04 2021 7:54am
.....
the text is SWIW.
Is it the same as SWIM?
Chinese typo I think :)
by Elinx
May 04 2021 9:14am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

... Brose repairers in the UK now fits an X O ring between the bearing and the crank..... An X-ring would be a better option, but O-rings are easier to find. I think you need about 2mm thickness for a tight fit between crank and new outer bearing. .....Would the additional bearings increase the lif...
by Elinx
May 04 2021 4:32am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

....recommend paying the extra for the enduro style double seal such as the 6902 LLU Max Also adviced to use glue (641 or epoxy for easy disassembly) for the outer bearings, because the size of the axle isn't exactly 15mm. Maybe an O-ring on the axle to fill the space between crank and bearing coul...
by Elinx
May 04 2021 4:18am
Forum: Motor Technology
Topic: TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.
Replies: 579
Views: 20828

Re: TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

perryscope wrote:
May 04 2021 4:09am
...

Interesting, Please can you link to this post? :thumb:
Some topics have parallel information. :)
I had answered almost the same question here
by Elinx
May 04 2021 3:45am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

Skirmish wrote:
May 03 2021 11:36pm
Elinx wrote:
May 03 2021 10:44am
2 or 3 extra bearings for better axle support.
Is there a tutorial on how to do this?...
Not really a tutorial, but an illustration of the spider and some info about bearings you can choose here
Bearingforseals.gif
Bearingforseals.gif (514.11 KiB) Viewed 215 times
The animation is based on the drawing of Wapous
by Elinx
May 03 2021 12:36pm
Forum: Motor Technology
Topic: TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.
Replies: 579
Views: 20828

Re: TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

...trying to start learning programming for stm8, but I feel that it will take me a lot of time until I can figure out the peculiarities of programming for this controller .... On the wiki is a development page for tsdz2 and inside "ebike_app.c" you find the assist modes and some readable...
by Elinx
May 03 2021 11:00am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

How can I Choice of assistance mode från VLCD5.... I don't know what you have read, but the default assist mode you can choose with the Configurator. For v.020.1C, if you also have enabled "set parameters at startup" : You can choose a different assist mode on vlcd5, with a " power /...
by Elinx
May 03 2021 10:44am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8579
Views: 942858

Re: New "TSDZ2 Torque Sensor Central Motor"

.... the reliability issues have been addressed with updated versions of the motor? ... No, this motor is still the same as 2016. Only mechanical change was the use of helical gears for less noise. Modifications on the axle aren't improvements, but more economical ( read cheaper ) modifications. if...
by Elinx
May 02 2021 5:07am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

........ I'll give hybrid mode a go next, If i can figure out how to get there on the Vlcd-6 :lol: . Switching street mode and getting battery percentage and voltage to display is about the extent of my knowledge so far but I'll figure it out. ...... On that note; Is it possible to do the torque se...
by Elinx
May 02 2021 3:07am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

...... solve the problem of a freezed controller,........[/b] ........Do I then have to program the program memory tab and data memory separately with the same firmware? I never had to do this, because I never had problems, but as I understand flash OSF with Java Configurator and after that the sto...
by Elinx
May 01 2021 2:42pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... I haven't measured the ADC values yet....... This post (point 1) describes a similar problem. ..... Measure (and calibrate) your torque adc settings. Then you know for sure if this could be a reason. Also famichiki had a very sensitive torquesensor, with an very high min. point. He has done for...
by Elinx
May 01 2021 6:22am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... How do I get to the menu to read the pedal force? Then needed when setting v20.1C ....... I think you confuse the extra settings of stock Firmware and calibrate torquesensor setting of OSF v0.20.1C If you flash OSF these extra settings are gone and you need the manual of OSF how to calibrate th...
by Elinx
May 01 2021 5:07am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... Anyone experienced any similar problems? Here is this described too. It could be the sensitivty of your torque sensor. Which torque adc range you have? Do you have enabled the setting "assist without pedaling"? Here this behaviour was too and he discovered that the torquesensor was to...
by Elinx
May 01 2021 4:48am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6559
Views: 494262

Re: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Heisenberg60 wrote:
May 01 2021 2:02am
....... i didn`t know there was a new controller.
But how do i know which controller they use ? .....
Mostly they advertise with "Edition 2020". But otherwise you can't know.
I only saw this new 2020 controller at the German Enerprof shop.
by Elinx
Apr 30 2021 4:38pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6559
Views: 494262

Re: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

.... is there any "real" difference between the 500 and 750 watt versions, eg a differtent controller ? or is it just a software limitation ? No, No, Yes There are just two motor types 36V 4000RPM and 48V 4000RPM, all other hardware and electronics are the same. There are 2 controller typ...
by Elinx
Apr 29 2021 1:15pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I buy tsdz2 with open soft. .... The OSF version could be interesting. This because I advice yoy to read some manuals how to handle the display. v 0.20.1B manuals v 0.20.1C manuals If the controller hardware is defective E03 is for the cadence sensor. But I think in your case Turbo-level E03 has to...
by Elinx
Apr 29 2021 1:44am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1602
Views: 188507

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

To change between road / off-road modes and back again what are the procedures with the VLCD5? .... Does removing the display .... return to its default mode? OffRoad- Road > level 1- light, light or, if you start your display: ON..........ON....ON With stock display the controller is programmed wi...