Search found 3 matches

by Ryan Saldanha
Sep 12 2019 10:51am
Forum: Battery Technology
Topic: Ebike Shuts Down Under Load or High RPMs Without Load
Replies: 8
Views: 280

Re: Ebike Shuts Down Under Load or High RPMs Without Load

A couple more comments...are you using the new high current version of the VRUZEND caps? You will need those. All the wire from the pack taps to the controller, and also the phase wires to the motor should be a minimum of AWG 14, but I would be using at least AWG 12. I am using the V2 high current ...
by Ryan Saldanha
Sep 10 2019 12:24pm
Forum: Battery Technology
Topic: Ebike Shuts Down Under Load or High RPMs Without Load
Replies: 8
Views: 280

Re: Ebike Shuts Down Under Load or High RPMs Without Load

How old is the kit? Did it EVER work correctly, or has this been a problem from day one? I finished custom building this prototype system this past April. When I tested it at that time, this issue was present. I did not work with the project for a while, but upon revisiting it, the same issue was t...
by Ryan Saldanha
Sep 06 2019 11:21am
Forum: Battery Technology
Topic: Ebike Shuts Down Under Load or High RPMs Without Load
Replies: 8
Views: 280

Ebike Shuts Down Under Load or High RPMs Without Load

EBike Specs: I have custom built a mid drive ebike with a frame mounted motor and controller (components linked at bottom). I built a 48V 13S battery pack with 3 cells in parallel. A 48V BMS is installed on the battery. The battery is connected to the controller with an XT60 connector. All the batte...