Search found 7 matches

by Oli.Hall
Sep 09 2020 8:35am
Forum: E-Bike Technical
Topic: Baserunner Z9 Speed and Temperature input
Replies: 2
Views: 315

Re: Baserunner Z9 Speed and Temperature input

Hi, Thanks - I also discovered this through testing, and also later had it confirmed by Justin_Le @ Grin. Newer versions of the Baserunner (i.e. the Baserunner_Z9) have an additional microcontroller onboard which is connected to the white wire that will allow the Baserunner to read both the temperat...
by Oli.Hall
Jul 23 2020 8:34am
Forum: E-Bike General Discussion
Topic: Crystalyte SAW and MSOFP16 geared motor questions
Replies: 4
Views: 241

Re: Crystalyte SAW and MSOFP16 geared motor questions

Hi, I already a own a very well engineered Brompton conversion from a well known aftermarket vendor which uses a light and powerful geared hub motor. In the future I would like to give use of this to my GF and I am currently building a second Brompton for myself and I am currently evaluating a coupl...
by Oli.Hall
Jul 22 2020 6:33am
Forum: E-Bike Technical
Topic: Baserunner Z9 Speed and Temperature input
Replies: 2
Views: 315

Baserunner Z9 Speed and Temperature input

Hi, I have a Baserunner_Z9 with the Z910 motor connector and the WP8 connector for the Cycle Analyst v3.1 and I would like to know how it determines how to process the input on the 'white' wire of the Z910 connector which is commonly connected to either a Temperature sensor / NTC thermistor inside a...
by Oli.Hall
Jul 19 2020 3:37am
Forum: E-Bike Technical
Topic: Show motor temperature with S-LCD3 display
Replies: 15
Views: 4516

Re: Show motor temperature with S-LCD3 display

If your KT Controller and LCD3 display is displaying speed when the motor is powered, but the speed goes to zero when the motor is coasting, then the KT Controller is reading your speed from the motor and it is not reading the speed from the white wire. If it was reading the speed from the white wir...
by Oli.Hall
Jul 16 2020 6:15am
Forum: E-Bike Technical
Topic: Cute Q100H Autopsy & Modify 2017
Replies: 54
Views: 6443

Re: Cute Q100H Autopsy & Modify 2017

Sorry to raise this thread from the dead! To access and remove the rotor, when separating the two halves of the stator casing, after removing the drive-side stub-axle and the planet gears, then turning the motor over and removing the the six screws around the edge of the stator casing cover, does an...
by Oli.Hall
Dec 26 2019 5:06pm
Forum: E-Bike Technical
Topic: Please help to identify this Bafang branded 3-pin waterproof connector
Replies: 0
Views: 1017

Please help to identify this Bafang branded 3-pin waterproof connector

Hi, I need some help to identify this 3-pin over-moulded waterproof connector which is branded Bafang. The seller of the bike initially told me that the connector was a Higo, but the closest Higo that I can find is the Z310 which has thicker, differently spaced pins. I have searched for hours to try...
by Oli.Hall
Oct 03 2019 5:35am
Forum: E-Bike Reviews & Testing
Topic: Grin Brompton Kit
Replies: 2
Views: 1921

Re: Grin Brompton Kit

Hi, I am interested in buying exactly the same setup for my London commute too! I found your post because I am also interested in how to solve the ebrake issue. Could I ask which levers you used in the end please? Have you found any other issues or minor inconveniences that I should plan for with th...