Search found 12 matches

by phm2000
Nov 18 2019 2:27pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

The torque sensor is death again.Is the second time!!! The coils lost their antifriction tape.Is destroyed. May be the bad chain line make a lateral force and bend the sensor.The three little springs can´t controller the gap between the coils.I find the movable sensor coil (and chainring) too deeps...
by phm2000
Nov 15 2019 11:34am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

Can anyone recommend a way of getting my standard 42 tooth front sprocket down to say a 36 tooth and still get a reasonable chain line ? There's the (costly) future-bike.it 30T NW chainring : https://www.electrifybike.com/store/p66/30T_Narrow%2FWide_Chainring_for_TSDZ2.html#/ Thanks, 30T would be t...
by phm2000
Nov 15 2019 4:41am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

SW102 display, flash firmware by Bluetooth only We have very good news, on next days we will get the SW102 display to work by flashing firmware with Bluetooth only!! SW102 is a modern display and I had seen many ebikes coming to the market equipped with it, because it is an OEM display and we can f...
by phm2000
Nov 10 2019 7:14am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

I remember someone asking this question before but can't remember if there was a reply. Does anyone know the specs or a supplier of the springs for the torque sensor? My motor stopped giving any power(I only have about 20 miles on it so far). Something meant that the bottom sheet of the torque sens...
by phm2000
Nov 06 2019 10:49am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi I should change my torque sensor. Should I hit with hammer on axis to enter it or not (it's hard with hand) ? Hitting with a hammer isn't a problem. I would remove the pedal shaft first though. There is a roller bearing in the centre of the housing that the torque sensor fits into (and spins on)...
by phm2000
Nov 05 2019 6:30am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

Hello, I just bought a tsdz2 kit, had some problems with chainline, for now grinding the housing got my chain line to 53mm, Can somebody tell me if i can find the crank arm (righ one) with 0 Offset ? But shipping to UK or Europe ? The bafan crank arm has 0mm offset ? https://www.electrifybike.com/s...
by phm2000
Nov 05 2019 6:23am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

casainho wrote:
Nov 04 2019 4:51pm
phm2000 wrote:
Nov 04 2019 2:01pm
Hi

I should change my torque sensor.
Should I hit with hammer on axis to enter it or not (it's hard with hand) ?
Yes, I do hit with the hammer but very slow and making sure the path is clear.
Thanks, I'll try it
by phm2000
Nov 04 2019 3:40pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 955
Views: 98779

Re: Tsdz2 firmware open source adapted to vlcd5

Hi I just install a new TSDZ2 750W 48V with VLCD5, with Ackmaniac firmware, all seems to be fine (thanks a lot Marocq and Ackmaniac) But and after 20km, no more assistance. I put factory firmware again and try, no assistance. But Walk assist is OK Throttle is OK On hidden menu, I find : RE is at 0 ...
by phm2000
Nov 04 2019 2:01pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6941
Views: 718951

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi

I should change my torque sensor.
Should I hit with hammer on axis to enter it or not (it's hard with hand) ?
by phm2000
Oct 27 2019 4:32pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 955
Views: 98779

Re: Tsdz2 firmware open source adapted to vlcd5

Hi I just install a new TSDZ2 750W 48V with VLCD5, with Ackmaniac firmware, all seems to be fine (thanks a lot Marocq and Ackmaniac) But and after 20km, no more assistance. I put factory firmware again and try, no assistance. But Walk assist is OK Throttle is OK On hidden menu, I find : RE is at 0 ...
by phm2000
Oct 27 2019 3:02pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 955
Views: 98779

Re: Tsdz2 firmware open source adapted to vlcd5

Elinx wrote:
Oct 27 2019 11:22am
phm2000 wrote:
Oct 27 2019 10:22am
.....
Ackmaniac firmware, .....
...
no more assistance.
...
I put factory firmware ..... no assistance.
......
What's the problem ?....
Maybe the speedsensor is rotated or too close to magnet?
It doesn't seem to be that.
Could it work if I unplug the speed sensor ?
by phm2000
Oct 27 2019 10:22am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 955
Views: 98779

Re: Tsdz2 firmware open source adapted to vlcd5

Hi I just install a new TSDZ2 750W 48V with VLCD5, with Ackmaniac firmware, all seems to be fine (thanks a lot Marocq and Ackmaniac) But and after 20km, no more assistance. I put factory firmware again and try, no assistance. But Walk assist is OK Throttle is OK On hidden menu, I find : RE is at 0 a...