Endless Sphere

Hello again. Yes, somehow I missed the instructions on page 50 - calibration mode works now. I have (hopefully?) determined the correct value for the flux weakening and now I struggle to use this knowledge. Display-calibration.gif Yes, the throttle is not 100%, but there is no difference if I move i...

Dear smotors, thank you very much for your reply. I will try the software part later today (just woke up :wink: ). About my power source: I used a fully charged 17s battery, which prevents the cells being charged when the charging level is between 100% and around 80%. This means, that the energy tha...

RS485 is a protocol. Unless you get both from the same manufacturer or the source code of either the battery or the controller and the full protocol specifications so that you can match the communication, it is close to impossible that both components can communicate with each other out of the box.

Hello everyone. After a couple of hours reading here, I still have a bunch of questions. First of all my setup: Votol EM50S with an unknown 2kw motor https://photos.app.goo.gl/shr4isCZqwwckvFHA https://photos.app.goo.gl/iCxRCXMmdVqzgi2C6 https://photos.app.goo.gl/UBetemE7Kic6ngsj6 https://photos.app...

TB is the new one and what that is doing we do not know yet TB gets on our bikes 5V, when the controller is powered on. Pull it down to ground (no resistor, just shortcut) and the bikes immobility function gets activated. This means: the motor is doing everything to prevent the wheel being turned