Search found 10 matches

by Aus550
Apr 06 2020 1:09am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

Yes your correct. It didn’t go any faster with an extra turn of the pot so I found its limit. Also the max speed has dropped with less than a full charge, only by a couple of Kph.
by Aus550
Apr 04 2020 7:17pm
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

Amberwolf how do I know when I found the top speed of this unit? The screw on the high speed pot still as more advancement left.

Thanks
by Aus550
Mar 31 2020 3:00am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

Two full turns up to 20 kph freewheeling it.:) so three would probably get me near it’s top speed.

Happy as amberwolf! You’ve been a great help.

What do you think?
by Aus550
Mar 31 2020 2:38am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

if each of the three "gears" is still exactly the same speed it was before changing it, then it's probably not going to be that easy. :( but if it's even *slightly* different, then it may be changing it, and turning it further should change it more. those are "multiturn" pots, w...
by Aus550
Mar 30 2020 11:46pm
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

to me, those three blue pots labelled l, m, h, seem an obvious place to start, as those could be low, medium, high. before changing anything, use a marker or something to make a thin mark on both the brass knob and the blue box so you can realign them to their original setting, if it turns out they...
by Aus550
Mar 30 2020 12:47am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

to me, those three blue pots labelled l, m, h, seem an obvious place to start, as those could be low, medium, high. before changing anything, use a marker or something to make a thin mark on both the brass knob and the blue box so you can realign them to their original setting, if it turns out they...
by Aus550
Mar 29 2020 10:34pm
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

Here are some pics of the pcb, wiring etc. Control Box.jpg Upper PCB PCB UPPER..JPG.jpg Lower PCB PCB LOWER.JPG.jpg Power Cables & Hall Sensor? IMG_8404.JPG. POWER CABLES.jpg COI1? COI1.JPG (1).jpg COI2? COI2.JPG.jpg Control Locations Control Locations.JPG.jpg SC SC1.JPG.jpg SC Cables? SC2.JPG.j...
by Aus550
Mar 28 2020 3:50am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

Just quickly with regards to the three speeds. I’m using the fastest option which is 10kph or 6mph. The other two speeds are slower than that, if you can believe it.:shock: Yes it does have a forward and reverse gear. I may pm you with some more info for now.

Aus550
by Aus550
Mar 28 2020 2:07am
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Re: Batec speed controller?

is this the unit in question? https://batec-mobility.com/en/products/handbikes/compare-and-choose-add-on-for-wheelchair the one on the right column? if so, it should be capable of a max of 30kmh (once it's delimited), per their specs (quoted at the end of this post). it also says it's 1200w system,...
by Aus550
Mar 27 2020 9:02pm
Forum: EBike Technical
Topic: Batec speed controller?
Replies: 47
Views: 2274

Batec speed controller?

Hi guys, I’m from Australia and recently purchased a Batec Scrambler so I could get around my local neighbourhood without having to use my car. For those that don’t know what the scrambler is it’s a hub drive wheel with handlebars that can be mounted to a lightweight manual wheelchair turning it int...