Search found 80 matches

by nardcox
Oct 18 2020 4:37am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

Just tried the trick I've posted in the above video. I've noticed that it doesn't matter whether I select "sw" or not it does regen the same. It has to the with the value on page 1 "rate of decline". I'm noticing it has regen the higher the value the higher the regen. This however stops at a certain...
by nardcox
Oct 16 2020 5:10am
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

You said your bike dosent work, regardless of the bms. So I guess you have bypassed the bms, and the bike still dosent work? But anyway, if you still get the fault even when nothing is connected to the output of the bms there probably is something wrong with a mosfet or something. You can try with ...
by nardcox
Oct 11 2020 3:46am
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

Hmm..I posted this question on another forum as well with all the extra info, though I did it here as well, apparently I didn't, my apologies. Yes I still get the error even when nothing else is connected. I can still connect the controller to the pc and read the rpm when I turn the wheel manually a...
by nardcox
Oct 10 2020 10:55am
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

The bike doesn't work at all, regardless of the BMS.

What happened is that I switched the positive and negative on the controller. I can't do much more than look? I read that you measured each individual mosfet, but I'm totally clueless about how to go about such a thing.
by nardcox
Oct 10 2020 8:02am
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

I assume with output you mean voltage? Voltage on the + battery and - battery is 80.1V (20S @ 4.0V) Voltage on the + battery and C- BMS is 77.2V Voltage on the + battery and C- BMS is 80.1V with BMS on Voltage on the + battery and C- BMS is 77.9V with BMS in error mode I didn't find your post since ...
by nardcox
Oct 10 2020 7:10am
Forum: E-Scooter and Motorcycle General Discussion
Topic: Super Soco TS Upgrade
Replies: 65
Views: 5167

Re: Super Soco TS Upgrade

Goodluck with correcting all the wrong info on the internet, don't wear yourself out.

As I said, I mistyped (was on my way and typing on my cellphone), i'm terribly sorry for that. I hope I didn't ruine anyone's live.
by nardcox
Oct 09 2020 6:41pm
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

I have another issue: https://photos.app.goo.gl/G9gF6pL7b1H939Dr6 Discharge Tube is Abnormal. Didn't find anything... Anyone any suggestions? Anyone? Finally the seller got back to me (holiday in China apparently). They asked me to restart (already tried that ofc), and then they said ship it back.....
by nardcox
Oct 08 2020 5:07pm
Forum: E-Scooter and Motorcycle General Discussion
Topic: Super Soco TS Upgrade
Replies: 65
Views: 5167

Re: Super Soco TS Upgrade

They are only (bad) typos, I've corrected them. If one doesn't know the difference between A and Ah one shouldn't be building battery packs. Regarding the controller ratings. I've read many different stories, these numbers however, are the only ones that make the numbers work provided by Super Soco....
by nardcox
Oct 02 2020 7:15am
Forum: E-Scooter and Motorcycle General Discussion
Topic: Super Soco TS Upgrade
Replies: 65
Views: 5167

Re: Super Soco TS Upgrade

The stock motor and the QS273 are not the same. The QS one weighs way way more and the settings for the QS didn't work in the stock motor.
by nardcox
Oct 02 2020 3:01am
Forum: E-Scooter and Motorcycle General Discussion
Topic: Super Soco TS Upgrade
Replies: 65
Views: 5167

Re: Super Soco TS Upgrade

It's the QS273 motor, not QS276. I also believe the motors will be identical, would make sense since producing 1 motor is easier and probably cheaper than producing 2 (this is often done in the automotive industry as well). TS Controller: 40A (60V *40A = 2.400W peak = 1.200w continuous) Battery: 60V...
by nardcox
Sep 30 2020 2:34pm
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

I have 1 more issue. How do you guys turn on and off the bms? I tried an on off switch on the 2 wires on the jst plug on the side of the bms and also a momentary switch but the bms still remains on.. So strange. I use the switch on the side and all lights will go out. I have another issue: https://...
by nardcox
Sep 28 2020 4:50pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

QS Motors just released a video regarding regen when releasing throttle. Will give it a try as soon as I made some small changes to wiring. 66XnN7IrjdE Just set regen value and hook up 12v supply through a brake switch to the correct pin and voila. It’s in the manual if you have reading skills😀 Wher...
by nardcox
Sep 26 2020 4:22pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

True, I can try to use the HDC for this. A button works, that's good to know. Did also anyone try with a lever? I've seen bikes using a lever so you can modulate the amount of regen. Ps. Kind of bummed out since I was under the assumption that this controller supported regen. I always assumed regen ...
by nardcox
Sep 25 2020 11:24am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

Man this topic is dead ... I bought this controller partially because I thought it would get solid support from the ES but unfortunately I was wrong... Anyway, I've made some adjustment to my rear arm and placed the QS motor. Reset the controller with the settings that where pre-installed in the con...
by nardcox
Sep 22 2020 12:30pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

Still don't have the bike running. Will try and make a video of how the motor sounds sometimes. It keep of feels like there is a slip diff inside and it doesn't grasps immediately. I've briefly tried opening the motor without luck, also got feedback from SuperSoco saying they don't know and even if...
by nardcox
Sep 21 2020 4:14pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

Still don't have the bike running. Will try and make a video of how the motor sounds sometimes. It keep of feels like there is a slip diff inside and it doesn't grasps immediately. I've briefly tried opening the motor without luck, also got feedback from SuperSoco saying they don't know and even if ...
by nardcox
Sep 19 2020 1:46pm
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

That's quite a big unbalance. I think you can force balancing in the app, you could try that.

Keep an eye on those voltages, it they discharge and become unbalanced you need to inspect the pack.
by nardcox
Sep 12 2020 3:00am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

How much current do you pull then? Can't imagine it being more than 120A as per your settings.
Does the error come when you pull the throttle or when you release the throttle (regen)?
by nardcox
Sep 11 2020 5:30pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Mine looks like this: Yeah, saw that version to, just thought it was for the 'Sport' models. Anyway, tried that software, seems to work just fine. Both options however where turned off, will give it a quick spin tomorrow to see if anything changed. As for the hall shift angle. I always read -120, -...
by nardcox
Sep 11 2020 9:16am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

Maybe try a different program to make sure that it isn't on? But you also say the motor doesn't sound good sometimes, maybe some motor settings is wrong? Which one? I'm using: votol new 2019082254162001 EM50 EM100 EM150 without CAN BUS VOTOL-EM-V3 Software Debugging(IO19).exeWhich one? I'm using: v...
by nardcox
Sep 09 2020 5:19pm
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

Yes, I also missed it at first (I have the lcd version though). It's a very small button that you will have to connect to a connector with 2 cables, should also be supplied. Carefully look at the pictures on the AliEx site (from ICGOGO). Regarding bluetooth, go into the bluetooth settings on your ph...
by nardcox
Sep 09 2020 2:03pm
Forum: Battery Technology
Topic: bluetooth BMS?
Replies: 1572
Views: 198943

Re: bluetooth BMS?

Did you also connect the power BUTTON and turned it on (stupid question probably)? Are the lights blinking on the BMS? I can select a Bluetooth device to connect to. Did you also enter the password (1234) in the Bluetooth settings menu?
by nardcox
Sep 06 2020 5:31am
Forum: E-Scooter and Motorcycle General Discussion
Topic: Super Soco TS Upgrade
Replies: 65
Views: 5167

Re: Super Soco TS Upgrade

Got the display connected, unfortunately it has some defect lines which makes reading the information more difficult. I have a question about the right switch on my Super Soco. It has the following functions: Park mode 3 speed switch toggle switch (which doesn't have any function, yet...) It has the...
by nardcox
Sep 04 2020 4:27pm
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1150
Views: 114196

Re: Votol EM-100 & EM-150 controllers

I am assembling a battery for a motorcycle and thinking about which battery to collect 72v 50-60ah or 60v 100ah. And the question is whether the controller will open from 60v to 100%? Those are the different setups: 72v * 60Ah = 4,32 60v * 100Ah = 6,00 The equivelant 72v of a 60v100Ah is 83Ah. Gene...